Need some gearbox advice

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
Mivec swapped gx
Apprentice
Posts: 99
jedwabna poszewka promocja
Joined: Fri Dec 22, 2017 3:06 pm

Need some gearbox advice

Post by Mivec swapped gx »

Does anybody know for sure if there are any stronger manual gearboxes that bolt upto the mivec engine as mines on its way out and im wanting a box that can handle more power,
Thanks in advance
User avatar
Vectose
Forum Moderator
Posts: 3947
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Need some gearbox advice

Post by Vectose »

None
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
Mivec swapped gx
Apprentice
Posts: 99
Joined: Fri Dec 22, 2017 3:06 pm

Re: Need some gearbox advice

Post by Mivec swapped gx »

None at all? Anyone know roughly how much it would cost to uprate the fto box for around 300hp
User avatar
Vectose
Forum Moderator
Posts: 3947
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Need some gearbox advice

Post by Vectose »

Stock box will handle that fine.

Only issues are input shaft bearings. Same as the EVO boxes.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
Mivec swapped gx
Apprentice
Posts: 99
Joined: Fri Dec 22, 2017 3:06 pm

Re: Need some gearbox advice

Post by Mivec swapped gx »

Any chance you know the best input shafts/bearings to get for it then, just dont want to go get a new one then something goes wrong
Thanks for the quick response
User avatar
Vectose
Forum Moderator
Posts: 3947
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Need some gearbox advice

Post by Vectose »

Stock
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: Need some gearbox advice

Post by bjk »

Just don't launch it 24/7 she'll be rite
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
Mivec swapped gx
Apprentice
Posts: 99
Joined: Fri Dec 22, 2017 3:06 pm

Re: Need some gearbox advice

Post by Mivec swapped gx »

Lol thanks man wasnt to sure
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: Need some gearbox advice

Post by bjk »

The real question is what you're gonna be doing to take it to 300hp anyway :lol:
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
Vectose
Forum Moderator
Posts: 3947
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Need some gearbox advice

Post by Vectose »

Exhaust and pod filter
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
User avatar
Sahin
HULK
Posts: 5518
Joined: Wed Oct 05, 2011 10:38 pm
Location: Up to me nuts in boys guts

Re: Need some gearbox advice

Post by Sahin »

Taz is back \o/
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: Need some gearbox advice

Post by bjk »

Sahin wrote: Fri Jan 12, 2018 10:35 pmTaz is back \o/
:lol:
Vectose wrote: Fri Jan 12, 2018 10:23 pm Exhaust and pod filter
Make that two pod filters
twin pod lol.jpg
twin pod lol.jpg (110.31 KiB) Viewed 3263 times
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
Sahin
HULK
Posts: 5518
Joined: Wed Oct 05, 2011 10:38 pm
Location: Up to me nuts in boys guts

Re: Need some gearbox advice

Post by Sahin »

I see a cool air intake. Its got a Nos fogger system and a T4 turbo. I see an AIC controller. It has direct-port nitrous injection and a stand alone fuel management system. Not a bad way to spend 10,000 dollars.
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: Need some gearbox advice

Post by Bennoz »

It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: Need some gearbox advice

Post by bjk »

Bennoz wrote: Sat Jan 13, 2018 12:02 pm It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
Unless he drives it like you
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: Need some gearbox advice

Post by Bennoz »

bjk wrote: Sat Jan 13, 2018 12:29 pm
Bennoz wrote: Sat Jan 13, 2018 12:02 pm It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
Unless he drives it like you
And look where I ended up. In a Commodore :lol:
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: Need some gearbox advice

Post by bjk »

Bennoz wrote: Mon Jan 15, 2018 11:21 am
bjk wrote: Sat Jan 13, 2018 12:29 pm
Bennoz wrote: Sat Jan 13, 2018 12:02 pm It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
Unless he drives it like you
And look where I ended up. In a Commodore :lol:
Shame. Shaaaame!
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
Sahin
HULK
Posts: 5518
Joined: Wed Oct 05, 2011 10:38 pm
Location: Up to me nuts in boys guts

Re: Need some gearbox advice

Post by Sahin »

And I ended up in a camry (sort of)
silverGPX
9.5"
Posts: 6793
Joined: Tue Oct 13, 2009 5:00 pm

Re: Need some gearbox advice

Post by silverGPX »

Sahin wrote: Fri Jan 12, 2018 10:35 pmTaz is back \o/
He’s selling parts on gumtree now.

http://www.gumtree.com.au/s-ad/wynnum-w ... ios_social
evo-gsr
Grease Monkey
Posts: 181
Joined: Sat Sep 21, 2013 9:35 pm

Re: Need some gearbox advice

Post by evo-gsr »

Please.. .give the back story on Taz?
Pm if need be.
Post Reply