Clutch slave knackered?

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
Rob Furniss
Oldtimer
Posts: 1394
jedwabna poszewka promocja
Joined: Wed Jan 19, 2011 11:32 pm
Location: Perth
Contact:

Clutch slave knackered?

Post by Rob Furniss »

After manual gearbox conversion, we've just bled the clutch slave but the piston coming out that is supposed to push the fork isn't moving when he presses the clutch pedal.
What is most likely - that we've bled it wrong or that the slave is knackered?
User avatar
Vectose
Forum Moderator
Posts: 3947
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Clutch slave knackered?

Post by Vectose »

If it's old replace it.

I've also had issues bleeding it by the pumping the pedal method in the past, had to use a vacuum pump.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
Rob Furniss
Oldtimer
Posts: 1394
Joined: Wed Jan 19, 2011 11:32 pm
Location: Perth
Contact:

Re: Clutch slave knackered?

Post by Rob Furniss »

Ok thanks Rob, got one on order.
User avatar
spetz
Oldtimer
Posts: 2915
Joined: Wed Mar 03, 2004 6:00 pm

Re: Clutch slave knackered?

Post by spetz »

I had the same problem when I took my clutch slave cylinder off.
Turned out that I wasn't bleeding it correctly.

In the end I used a large syringe and sucked fluid through the slave cylinder rather than pressing the pedal to bleed
Rob Furniss
Oldtimer
Posts: 1394
Joined: Wed Jan 19, 2011 11:32 pm
Location: Perth
Contact:

Re: Clutch slave knackered?

Post by Rob Furniss »

Ordered a new slave for Rowans car (the newly converted manual).
In the meantime I removed the slave and managed to free up the piston using a G clamp to press it in and compressed air to pop it out, it now moves freely by hand so i've refitted it for now and will bleed it when he gets back from work (need another pair of hands/feet).

He's desperate to drive it this weekend to make sure all is ok as we're moving in a couple of weeks time so he needs it to be right for that (2400km move).
I'll still probably swap out the slave when the new one arrives though.
silverGPX
9.5"
Posts: 6793
Joined: Tue Oct 13, 2009 5:00 pm

Re: Clutch slave knackered?

Post by silverGPX »

Protex CE Lancer ones are cheap on ebay. I just recently replaced slave and master cylinders.
Post Reply