Need help with bushes for a GPvR

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
Shhtuart
Forum Moderator
Posts: 1747
jedwabna poszewka promocja
Joined: Sun Aug 05, 2007 5:00 pm
Location: Melbourne
Contact:

Need help with bushes for a GPvR

Post by Shhtuart »

I've been through the suspension thread and can't seem to figure out which bushes are applicable.

All I know is that the GPvR has a 20mm front and rear sway bar and a front lower arm rear bush that's the same as all facelift models.

I know still know nothing about this offset caster mumbo jumbo.

HAAALLLPPPP
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: Need help with bushes for a GPvR

Post by Bennoz »

Oh god..
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Need help with bushes for a GPvR

Post by destinationtoby »

.
Attachments
image.jpg
image.jpg (20.88 KiB) Viewed 383 times
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
Shhtuart
Forum Moderator
Posts: 1747
Joined: Sun Aug 05, 2007 5:00 pm
Location: Melbourne
Contact:

Re: Need help with bushes for a GPvR

Post by Shhtuart »

Have some xmas spirit I am a colossal tosser.
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: Need help with bushes for a GPvR

Post by Bennoz »

Shhtuart wrote:Have some xmas spirit I am a colossal tosser.
Shhtuart wrote:xmas spirit I am a colossal tosser.
Shhtuart wrote:spirit I am a colossal tosser.
Shhtuart wrote:I am a colossal tosser.
Shhtuart wrote:I am a colossal tosser
Shhtuart wrote:I am a colossal tosser
Shhtuart wrote:I am a colossal tosser
Image
User avatar
Technikhaus
Oldtimer
Posts: 3656
Joined: Wed Dec 28, 2011 4:45 pm
Location: Dunedin - NZ
Contact:

Re: Need help with bushes for a GPvR

Post by Technikhaus »

:lol: :lol: :lol:
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
silverGPX
9.5"
Posts: 6793
Joined: Tue Oct 13, 2009 5:00 pm

Re: Need help with bushes for a GPvR

Post by silverGPX »

Hahahahahaha
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

Re: Need help with bushes for a GPvR

Post by dstocks »

Sorry, not sure myself
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    silverGPX
    9.5"
    Posts: 6793
    Joined: Tue Oct 13, 2009 5:00 pm

    Re: Need help with bushes for a GPvR

    Post by silverGPX »

    Well if u think about it, they would have the same bushes as a gr and gpx. Where the control arm bolts to is the same for all.
    User avatar
    Vectose
    Forum Moderator
    Posts: 3947
    Joined: Sun Nov 28, 2010 8:45 pm
    Location: Newcastle

    Re: Need help with bushes for a GPvR

    Post by Vectose »

    All bushes are the same except for sway bars and front lower control arm rear bush.

    There's a post in the suspension thread and a few other threads with part numbers.
    Bennoz wrote:
    Technikhaus wrote:What is in said Bens big penis by the way?
    A whoooole lot 'o jism 8)
    User avatar
    shadowarrior
    Tightarse
    Posts: 2703
    Joined: Thu Oct 27, 2011 4:48 pm
    Location: Gold Coast

    Re: Need help with bushes for a GPvR

    Post by shadowarrior »

    Bennoz wrote:Oh god..

    Yes!!! I am not alone!!! :)
    User avatar
    Shhtuart
    Forum Moderator
    Posts: 1747
    Joined: Sun Aug 05, 2007 5:00 pm
    Location: Melbourne
    Contact:

    Re: Need help with bushes for a GPvR

    Post by Shhtuart »

    H8rs
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Need help with bushes for a GPvR

    Post by payaya »

    Shhtuart wrote:I've been through the suspension thread and can't seem to figure out which bushes are applicable.

    All I know is that the GPvR has a 20mm front and rear sway bar and a front lower arm rear bush that's the same as all facelift models.

    I know still know nothing about this offset caster mumbo jumbo.

    HAAALLLPPPP
    Go to the camskill website and cross reference them. Lemme know if ya need the help!
    User avatar
    Shhtuart
    Forum Moderator
    Posts: 1747
    Joined: Sun Aug 05, 2007 5:00 pm
    Location: Melbourne
    Contact:

    Re: Need help with bushes for a GPvR

    Post by Shhtuart »

    Yeah, should have updated this thread with the outcome. I found all the part numbers.

    I'll post them in this for future reference later.
    User avatar
    Vectose
    Forum Moderator
    Posts: 3947
    Joined: Sun Nov 28, 2010 8:45 pm
    Location: Newcastle

    Re: Need help with bushes for a GPvR

    Post by Vectose »

    The poly sway bar bushes don't fit. They sit loose in the brackets.
    Bennoz wrote:
    Technikhaus wrote:What is in said Bens big penis by the way?
    A whoooole lot 'o jism 8)
    silverGPX
    9.5"
    Posts: 6793
    Joined: Tue Oct 13, 2009 5:00 pm

    Re: Need help with bushes for a GPvR

    Post by silverGPX »

    Make new brackets :)
    User avatar
    payaya
    Oldtimer
    Posts: 3670
    Joined: Sat Sep 06, 2003 5:00 pm

    Re: Need help with bushes for a GPvR

    Post by payaya »

    Shhtuart wrote:Yeah, should have updated this thread with the outcome. I found all the part numbers.

    I'll post them in this for future reference later.
    Fit them first then post haha.
    Post Reply