BC BR setup

shadowarrior · Post by **shadowarrior** » Fri Dec 27, 2013 12:22 pm

What settings related to preload are you guys running? I was going to use 4mm preload like this vid: http://www.youtube.com/watch?v=HlqOA35NmAw
Any suggestions?

ZFL45H1 · Post by **ZFL45H1** » Fri Dec 27, 2013 1:10 pm

Mines just standard off the shelf specs

shadowarrior · Post by **shadowarrior** » Fri Dec 27, 2013 1:12 pm

Just put them on? Didn't do any adjustments? hmm... I could move the springs around with my hand..so I thought preload was not properly set.

ZFL45H1 · Post by **ZFL45H1** » Fri Dec 27, 2013 1:13 pm

Oh fair enough mine where stiff as I couldnt move any part of them thats weird how that's happen

Are they all the one units when u got them or apart

shadowarrior · Post by **shadowarrior** » Fri Dec 27, 2013 2:15 pm

All together. Rob (Vectose) confirmed as long as the springs don't have up and down movement then I should be all right.
What hardness/softness settings are you running on yours?

ZFL45H1 · Post by **ZFL45H1** » Fri Dec 27, 2013 5:54 pm

Thats a good question lol are you talking about the top you can adjust if so
Both from soft turn front 12 clicks to hard and rear 14 clicks
I find its a nice ride like that.
Spring rates I dont know what they are just what ever standard is

shadowarrior · Post by **shadowarrior** » Fri Dec 27, 2013 7:19 pm

ZFL45H1 wrote:Thats a good question lol are you talking about the top you can adjust if so
Both from soft turn front 12 clicks to hard and rear 14 clicks
I find its a nice ride like that.
Spring rates I dont know what they are just what ever standard is

Yeah those ... I have got standard spring rates as well.

Aren't you supposed to go from hard 0 to soft while changing those settings? I have got them at rear 20 and front 15... 0 being hardest, 30 being softest. Yet to put my front ones in though

silverGPX · Post by **silverGPX** » Fri Dec 27, 2013 7:21 pm

Set 0 preload by winding top adjuster down so that the spring has a smidgeon of play, like u can move the spring a tiny tiny bit in its perch with force.

silverGPX · Post by **silverGPX** » Fri Dec 27, 2013 7:21 pm

Even a tiny bit of preload adds bouncy ness

Post by **Vectose** » Fri Dec 27, 2013 7:22 pm

Bennoz wrote:
Vectose wrote:Hey mate, just wondering if you set the spring preload on the BC cpilovers or if you are running them how they came out the box?
There's no preload to adjust. They're not like Teins, the lower cup under the spring is supposed to be a 'neat' fit against the spring. Just tight enough so there's no slap, yet you can still turn the spring in it's place.

silverGPX · Post by **silverGPX** » Fri Dec 27, 2013 7:24 pm

Shout me a carton and I'll install the lot sidds

Sahin · Post by **Sahin** » Fri Dec 27, 2013 7:25 pm

I'll help for free

silverGPX · Post by **silverGPX** » Fri Dec 27, 2013 7:28 pm

I'm more 1337

Sahin · Post by **Sahin** » Fri Dec 27, 2013 7:29 pm

Lol at leet

shadowarrior · Post by **shadowarrior** » Fri Dec 27, 2013 7:37 pm

Sahin wrote:I'll help for free

Get your ass back from melbourne first

Sahin · Post by **Sahin** » Fri Dec 27, 2013 7:39 pm

I'm back on the 5th lol f**k melbourne

shadowarrior · Post by **shadowarrior** » Fri Dec 27, 2013 7:46 pm

Sahin wrote:I'm back on the 5th lol f**k melbourne

LMAO!!!

Sahin · Post by **Sahin** » Fri Dec 27, 2013 7:48 pm

Anyone need anything from Dwayne on the way back lol

shadowarrior · Post by **shadowarrior** » Fri Dec 27, 2013 7:49 pm

Sahin wrote:Anyone need anything from Dwayne on the way back lol

I need something from Melbourne

Sahin · Post by **Sahin** » Fri Dec 27, 2013 7:50 pm

Me? Lol

FTO AUSTRALIA

BC BR setup

BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup

Re: BC BR setup