calling all viscous lsd owners

MOR31 · Post by **MOR31** » Tue Feb 11, 2014 9:07 pm

hey guys. need your help. i have a viscous lsd in my gearbox and need a new shaft, the original shaft was stuffed and thrown out. its proving impossible to find the shaft anywhere so was hoping some one could help me out if the know the part numbers or have one in their fto an wouldn't mind sharing the vin with me so i can find it using the Mitsubishi data base

PHIL069 · Post by **PHIL069** » Tue Feb 11, 2014 9:22 pm

PHIL069's 95 FTO GPX

Welcome to my ride.
What it has so far.......
-Viscous LSD...

DE3A0015318

You're welcome

MOR31 · Post by **MOR31** » Tue Feb 11, 2014 9:24 pm

thanks mate, and that was an option put in the car from factory?

sorry to be anal but its what mitsubishi told me to check

PHIL069 · Post by **PHIL069** » Tue Feb 11, 2014 9:48 pm

As far as I know all the numbers on my car match from factory.
I'm sure I did a VIN decode years ago which showed the numbers, not Complete FTO, an overseas site.

But I can't be 100% sure.

These are the "complete axle" part numbers that come up with my VIN#
RH = MR196436
LH = MR196435

PHIL069 · Post by **PHIL069** » Tue Feb 11, 2014 9:51 pm

Actually I believe I done my VIN# search at Mitsubishi Japan site.
I don't have time to research tonight, but I might get time to research tomorrow.

MOR31 · Post by **MOR31** » Tue Feb 11, 2014 9:56 pm

thanks heaps, ill see what those numbers bring up tomorrow

SchumieFan · Post by **SchumieFan** » Wed Feb 12, 2014 12:01 am

Mine is def factory standard... let me know if Phils doesn't pull the right numbers

Post by **Bennoz** » Wed Feb 12, 2014 7:50 am

Mike, do you want to flick me your VIN? Your's will have the viscous LSD. CAPS/ASA only narrows it down to the full 'joint kit', but that would be a start.

SchumieFan · Post by **SchumieFan** » Wed Feb 12, 2014 6:10 pm

DE3A0019068

Post by **Bennoz** » Wed Feb 12, 2014 7:51 pm

Hmmm, based on that chassis number, ASA is wrong.

It's feeding me the same part number for both sides: MR232222. Which makes no sense as we know both are different.

Technikhaus · Post by **Technikhaus** » Wed Feb 12, 2014 8:16 pm

Odd, it shows different PNCs but then the same part number but different part names...

: asajoint.PNG (7.78 KiB) Viewed 465 times

SchumieFan · Post by **SchumieFan** » Wed Feb 12, 2014 8:17 pm

Yeah that's weird... unless it's for a set? Unlikely... know where the part number would be on the shaft?

SchumieFan · Post by **SchumieFan** » Wed Feb 12, 2014 8:26 pm

Try this one... a manual COTY built the same week.

DE3A0019005

Or this... The last COTY built:(auto)
DE3A0019836

Technikhaus · Post by **Technikhaus** » Wed Feb 12, 2014 8:30 pm

Same result as before.

Post by **Bennoz** » Wed Feb 12, 2014 8:31 pm

Yup, same same

SchumieFan · Post by **SchumieFan** » Wed Feb 12, 2014 8:32 pm

this is fucked! if it wasnt dark id go measure them LOL

Post by **Bennoz** » Wed Feb 12, 2014 10:23 pm

SchumieFan wrote:this is fucked! if it wasnt dark id go measure them LOL

We know the measurements, we need the part numbers!

Post by **Shhtuart** » Wed Feb 12, 2014 10:55 pm

http://mitsubishi.epc-data.com/fto/de3a ... ive-shaft/

MOR31 · Post by **MOR31** » Sun Jun 08, 2014 4:38 am

Any more luck guys.

FTO AUSTRALIA

calling all viscous lsd owners

calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners

Re: calling all viscous lsd owners