Upper Console, KMC Dials or Steel Dial Surround, Bozz Bumper

Need something, Put it in here.
Private Sales Only

Moderators: IMC, Club Staff

Post Reply
DJay.A
Newbie
Newbie
Posts: 7
jedwabna poszewka promocja
Joined: Tue Jul 14, 2015 7:09 pm

Upper Console, KMC Dials or Steel Dial Surround, Bozz Bumper

Post by DJay.A »

Hey guys,

So I'm looking to purchase the upper console where the climate control, and dials are situated as the rubber has been peeled by the previous owner.
Also looking for some KMC dials or similar, otherwise just the steel dial rings would work perfectly to make the dash 'pop' a little.
And the final part I dream of getting my hands on is the Bozz front bumper, as the veilside front bumper just doesn't compliment the car's shape nicely in my opinion...

All help is appreciated! Thanks!!
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

Re: Upper Console, KMC Dials or Steel Dial Surround, Bozz Bu

Post by dstocks »

I can get you a rubber upper console I think.

You will have trouble locating a Bozz. They dont make them new in Australia anymore. Best you can hope for is coming across a 2nd hand one. Alternatively I can get you a new factory TS pre-facelift or facelift (your choice). Pics on link below (click link and scroll down - pics 5 and 6 give a good indication):

http://www.completefto.com.au/default.aspx

These are pics of my FTO. I can also get rear bar and the D Cuatro sideskirts. As mentioned above, I am doing prefacelift versions as well.

http://ftoaustralia.com/v3/viewtopic.ph ... ry#p397471
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    DJay.A
    Newbie
    Newbie
    Posts: 7
    Joined: Tue Jul 14, 2015 7:09 pm

    Re: Upper Console, KMC Dials or Steel Dial Surround, Bozz Bu

    Post by DJay.A »

    Okay awesome, how much for the upper console?

    I've already got veilside sideskirts which I like, so I'll just wait around to see if one comes up, if not it's not a necessity at the moment. :P
    Cheers for the help dstocks.
    User avatar
    dstocks
    National Vice President
    Posts: 9529
    Joined: Fri Jun 24, 2005 5:00 pm
    Location: Utopia
    Contact:

    Re: Upper Console, KMC Dials or Steel Dial Surround, Bozz Bu

    Post by dstocks »

    Ill have to check to make sure I have a good one and its just a little too hot outside atm (40 degrees).Will get back to you soon
    Complete FTO (http://www.completefto.com.au/completefto.asp)
      Image
      If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
      silverGPX
      9.5"
      Posts: 6793
      Joined: Tue Oct 13, 2009 5:00 pm

      Re: Upper Console, KMC Dials or Steel Dial Surround, Bozz Bu

      Post by silverGPX »

      Finally a newcomer that doesn't like veilside
      User avatar
      rock_it
      Oldtimer
      Posts: 6599
      Joined: Sun Jun 10, 2007 5:00 pm
      Location: The Shire .. NSW
      Contact:

      Re: Upper Console, KMC Dials or Steel Dial Surround, Bozz Bu

      Post by rock_it »

      Good luck with KMC dials..

      Try this bloke..

      http://moman.pl/eu/

      I have his products in my Evo/GSR.. He is expensive.. But a good product..
      I just had to add it ......
      sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
      I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
      Astron_Boy wrote:Hold me Sooty, I need man comfort.
      :utbnb:
      Post Reply