My other project coming to an end .... Sort of

From Ferrari's to Fiats, it happens in here.

Moderators: IMC, Club Staff

Post Reply
User avatar
rock_it
Oldtimer
Posts: 6599
jedwabna poszewka promocja
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

Not much more to report ... Just been paying off suppliers... :( Really hate that part...

Newest purchase is this ...

Image

So car is going to have the ability to run as AWD or RWD depending on the mood I am in ... Part is meant to be rated for 800hp ... So I should blow the drivetrain before I kill the gearbox... Well in theory anyway ..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: My other project coming to an end .... Sort of

Post by bjk »

#driftlyf

Seems weird that just a small component makes changes like that! Don't want to ask what that set you back! :lol:
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

Yeah, need to slightly mod the front drive shafts as well apparently ..

Gotta get Ricol to check it all out, and make sure it is not too much effort. But yeah, "Made of Billet Chromoly steel , this product has been reliably used to transmit 400 wheel hp to the ground on drifting EVO's."

Could make a copy of it, on the cheap, by welding up and playing with an existing coupling ... But would not be sure on how stable it would be under load... So given how much this car owes me, best to play it safe...

Next comes #stance... Blahahah ...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

http://s171.photobucket.com/user/rock_i ... 3.mp4.html

So 249kw atw.. (20psi)... Could run higher boost but happy with it there.. Most efficient range for the turbo on it, and should not put too much stress on other parts.. So no breaking sh*t..

Will get it back, drive it, and see how it goess..

Injectors still have heaps more left to give, so really comes down to what turbo, where I went the power etc.
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: My other project coming to an end .... Sort of

Post by Bennoz »

That'll do nicely
User avatar
Daniel2019
Oldtimer
Posts: 7957
Joined: Thu Jan 12, 2012 12:25 pm
Location: Sydney!
Contact:

Re: My other project coming to an end .... Sort of

Post by Daniel2019 »

Needs moar
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
bjk wrote:you old people are no help at all.
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

Daniel2019 wrote:Needs moar
Lol!

Needs to be driven..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: My other project coming to an end .... Sort of

Post by destinationtoby »

rock_it wrote:
Daniel2019 wrote:Needs moar
Lol!

Needs to be driven..
This
How's the swift goin?
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

destinationtoby wrote:
rock_it wrote:
Daniel2019 wrote:Needs moar
Lol!

Needs to be driven..
This
How's the swift goin?

Swift is going good man .. Has a few battle scars... So will fix those up after the wife has been driving for a while. Still have front + rear extensions to add to complete the kit...

Great car to drive, and very comfortable... Have almost put 60,000 on the clock... 8O
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: My other project coming to an end .... Sort of

Post by Bennoz »

rock_it wrote:
destinationtoby wrote:
rock_it wrote:
Daniel2019 wrote:Needs moar
Lol!

Needs to be driven..
This
How's the swift goin?

Swift is going good man .. Has a few battle scars... So will fix those up after the wife has been driving for a while. Still have front + rear extensions to add to complete the kit...

Great car to drive, and very comfortable... Have almost put 60,000 on the clock... 8O
Yeah but they're a timing chain, not a belt. No need for major service till 160k :cheers:
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

Bennoz wrote: Yeah but they're a timing chain, not a belt. No need for major service till 160k :cheers:
Mad... :)

Hey Mr Prez.. Looking at FEDERAL 595 RSR's ... $149.5ea ... Just deciding if need 225 or 215's...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: My other project coming to an end .... Sort of

Post by Bennoz »

rock_it wrote:
Bennoz wrote: Yeah but they're a timing chain, not a belt. No need for major service till 160k :cheers:
Mad... :)

Hey Mr Prez.. Looking at FEDERAL 595 RSR's ... $149.5ea ... Just deciding if need 225 or 215's...
Always go bigger :lol:

Seen the new 595 RS-RR?

http://www.federaltire.com/en/products_ ... tail_sn=36

Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

Bennoz wrote: Always go bigger :lol:

Seen the new 595 RS-RR?

http://www.federaltire.com/en/products_ ... tail_sn=36

Image
Yeah, the 215's just clear on the rear... So may get more scrubbage than I bargain for at 225...

That new design looks hot!!! 8O

But dread to know how much they will go for... Have got the 215's down to $137.50ea ... :)

So will prolly grab em now...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

Pick up is tomorrow... 8)

Image
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Daniel2019
Oldtimer
Posts: 7957
Joined: Thu Jan 12, 2012 12:25 pm
Location: Sydney!
Contact:

Re: My other project coming to an end .... Sort of

Post by Daniel2019 »

3rd gear? :(D):
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
bjk wrote:you old people are no help at all.
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

sh*t tyres on the car, made 4th unbearable and pretty dangerous given you will hit higher speeds... The shakes and ride was terrible, due to the tyres being so hard and out of shape... They were about 8 years old, and mostly spent more time sitting round than anything... They were that old, they were on my Sonata... 8O

New rubber is on, and none of the shakes exist that it use to have, but these came after I saw how bad the car was driving.

Tuning wise (and power wise) depending on the dyno set up, and the load applied results should be about the same ..

I want to do a run and see how it goes on an AWD dyno, and see how much of the power goes to all wheels, instead of being lost to the rear, and whatever the coupling and box absorb from the front...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

Am loving driving this thing to work ...

Don't want to go back to the Swift ... Hehehehe...

But I think the neighbours are gonna start hating soon .. Have adjusted my hours so I leave at 7am for work, instead of what the usual of 6:30 - 6:45am ...

Image
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: My other project coming to an end .... Sort of

Post by bjk »

That's a face that means business! Can just imagine this thing carving up a hill climb...

Should get some retrofit projectors and black the headlights!
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: My other project coming to an end .... Sort of

Post by rock_it »

bjk wrote:That's a face that means business! Can just imagine this thing carving up a hill climb...

Should get some retrofit projectors and black the headlights!
Have seen some on ebay .. But like $500 ...

Better things to spend on than that ... But may look at it at a later date...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: My other project coming to an end .... Sort of

Post by bjk »

Yeah that's a bit much.
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
Post Reply