Project Beema

A place for members to show off their pride & joys.

Moderators: IMC, Club Staff

Post Reply
User avatar
destinationtoby
Broke it
Posts: 3503
jedwabna poszewka promocja
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Project Beema

Post by destinationtoby »

As some of you may know,I've lost my license for 4 years. So Ive been searching for a cheap car I can restore & mod over the 4year period...
I bought a Subaru brumby for $100 with plans to drop a wrx engine in it, but after gutting the whole car I found too much rust in chassis rails & parted it out. Turns out that the old girl had a heap of rare parts and I made over $3000 off it.
Then I picked up this BMW for a $1000 off a mate who has had it for 5 years sitting in the shed after his Nan gave it too him.
jump started first go.

It's a 1980 e21 323i, 163,000kms. Completely original.
Interior is mint. I'd thought the body was perfect aswelll until I ripped out the boot carpet and rubbers today & found a sh*t load of bad rust. so ive got a fair bit of sh*t boring work ahead of me before any fun stuff begins.
For a 35 year old car, it's in pretty good nick.
Shall update as I go :D
You do not have the required permissions to view the files attached to this post.
Last edited by destinationtoby on Sat Mar 14, 2015 8:02 am, edited 1 time in total.
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: Project Beema

Post by bjk »

Nice. Slam it to the floor bruuuhhh. :lol:

Meanwhile, how the fek did you make 3k off $100?
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
Shhtuart
Forum Moderator
Posts: 1747
Joined: Sun Aug 05, 2007 5:00 pm
Location: Melbourne
Contact:

Re: Project Beema

Post by Shhtuart »

Very nice! You have a bit of time on your hands too :lol:
User avatar
Daniel2019
Oldtimer
Posts: 7957
Joined: Thu Jan 12, 2012 12:25 pm
Location: Sydney!
Contact:

Re: Project Beema

Post by Daniel2019 »

Subie brumbies have almost like a cult following.. lots of rare little bits and pieces that most people wouldn't think of. Mate of mine at work has a mint original one. Nice little cars actually.

Nice score on the bimmer.

What's with the angle of the head unit? :scratch:
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
bjk wrote:you old people are no help at all.
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: Project Beema

Post by rock_it »

Daniel2019 wrote:Subie brumbies have almost like a cult following.. lots of rare little bits and pieces that most people wouldn't think of. Mate of mine at work has a mint original one. Nice little cars actually.

Nice score on the bimmer.

What's with the angle of the head unit? :scratch:
Guessing it is a Pioneer... So it tilts up when the car gets turned off, so you can detach the face.. If you don't detach after a certain time, it folds back down...

Nice score on the car... Don't f**k with it... Just put it in stock original form ... It will be worth more that way ...

Has it had a front ender before? Looks like the front was a different colour... But could just be lighting...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Daniel2019
Oldtimer
Posts: 7957
Joined: Thu Jan 12, 2012 12:25 pm
Location: Sydney!
Contact:

Re: Project Beema

Post by Daniel2019 »

rock_it wrote:Looks like the front was a different colour... But could just be lighting...
Didn't notice that before.. well spotted!
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun :D
bjk wrote:you old people are no help at all.
User avatar
Technikhaus
Oldtimer
Posts: 3656
Joined: Wed Dec 28, 2011 4:45 pm
Location: Dunedin - NZ
Contact:

Re: Project Beema

Post by Technikhaus »

Nice score on the brumby!
Also nice score in the beamer, looks reasonably tidy!
I do like how they kind of hid the bonnet lines too...
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

Daniel2019 wrote:
rock_it wrote:Looks like the front was a different colour... But could just be lighting...
Didn't notice that before.. well spotted!

Nope, was just lighting & the filter on that pic. Checked it all out today.
I'll try get some good photos soon
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

Daniel2019 wrote:Subie brumbies have almost like a cult following.. lots of rare little bits and pieces that most people wouldn't think of. Mate of mine at work has a mint original one. Nice little cars actually.

Nice score on the bimmer.

What's with the angle of the head unit? :scratch:

Yeah lol I sold the power steering and the tailgate for $1000 :lol:
I've had people travel from a few states just for petty parts I was going to bin
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

:|
You do not have the required permissions to view the files attached to this post.
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: Project Beema

Post by rock_it »

Holy rusted metal Batman ... :lol:

That's not too bad .. I expecting a whole rear tyre well to be replaced with how you said there was a sh*t load of bad rust...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

Oh there's more
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

One of the shittest jobs
You do not have the required permissions to view the files attached to this post.
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
Shhtuart
Forum Moderator
Posts: 1747
Joined: Sun Aug 05, 2007 5:00 pm
Location: Melbourne
Contact:

Re: Project Beema

Post by Shhtuart »

Keep it the original colour :'(
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

image.jpg
You do not have the required permissions to view the files attached to this post.
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

Shhtuart wrote:Keep it the original colour :'(
That's just a rust proofunder coat lol I'll keep it silver
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Project Beema

Post by destinationtoby »

image.jpg
You do not have the required permissions to view the files attached to this post.
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
SchumieFan
Oldtimer
Posts: 5875
Joined: Thu Aug 05, 2004 5:00 pm
Location: GPS signal lost
Contact:

Re: Project Beema

Post by SchumieFan »

This looks maaaaad

I love it!
Image
User avatar
ZFL45H1
Oldtimer
Posts: 1830
Joined: Sun Feb 07, 2010 6:00 pm
Location: Albury

Re: Project Beema

Post by ZFL45H1 »

Mate thought you said 4 years loss of license. Your gunna be done in no time lol
gotta get there one day :)
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: Project Beema

Post by rock_it »

Gee .. You don't waste any time ... lolz...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
Post Reply