Jason's GPX

A place for members to show off their pride & joys.

Moderators: IMC, Club Staff

User avatar
destinationtoby
Broke it
Posts: 3503
jedwabna poszewka promocja
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: Jason's GPX

Post by destinationtoby »

It's fibreglass.. Not plastic
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
User avatar
Jasonp
Apprentice
Posts: 59
Joined: Wed May 28, 2014 3:10 pm
Location: Melbourne

Re: Jason's GPX

Post by Jasonp »

destinationtoby wrote:
dstocks wrote:Actually, not 20 year old parts. This is one of the the prefacelift TS Factory, so no more than a year old (Picture is a bit misleading - the TS is the one behind the Factory Facelift in front). It should not have snapped off the brackets unless mistreated in some way. And besides, if the bar was advertised as being sold in good condition, it should have arrived in good condition. And if it hasnt, both parties should be coming to a negotiated outcome.
It arrived in good condition. All pictures provided before hand, it arrived exactly as advertised.
Arrived in good condition? Are you serious? As I said before, I sent you a bunch of messages the day I got it about the damage, which you saw and then never responded to.

The pictures you provided me were obviously not close ups of the mounting brackets, which were all screwed before it was posted. Mezje has pointed this out.

Was advertised as "ready for paint." Most certainly was far far from it.

Attempted to start some sort of negotiation again recently but instead was told to simply get on my knees and suck his dick. Has the maturity of a 12 year old.
User avatar
Jasonp
Apprentice
Posts: 59
Joined: Wed May 28, 2014 3:10 pm
Location: Melbourne

Re: Jason's GPX

Post by Jasonp »

Alright so I'm finally about to get my major service done. Not doing the work myself but getting a mechanic to do it all. So far I've got what's listed below. Am I missing anything?
- Timing Belt
- Power Steering Belt
- Alternator Belt
- Rocker Cover Gasket (x2)
- RDA Slotted Rear Rotors
- EBC Red Stuff Rear Break Pads (Front discs and Pads are already done)
- Hydraulic Cambelt Tensioner
- Cambelt Tensioner Pulley
- Cambelt Centre Idler Pulley
- Power Steering Tensioner Pulley
- Alternator Tensioner Pulley
- NGK Iridium spark Plugs (x6)
- Spark Plug Seals (x6)
- Double Half Moon Seal (x2)
- Camshaft Oil Seals (x4)
- Crank Oil Seal Cambelt Side
- Camshaft Core Plugs
- Front Lower Rear Arm Bush
- Front Lower Rear Arm Std
- Engine Mounts
- Water Pump
- Fuel Filter
- Transmission Filter
- Mivec Tappet Adjustments screws + tappet tool + feeler gauges
User avatar
mezje
Mechanic
Posts: 520
Joined: Wed Mar 11, 2015 12:03 am

Re: Jason's GPX

Post by mezje »

You can get most of that from Rob, good list.

Should fix the roof while you are at it!
Post Reply