Victor Harbour Cruise

Cruises, Meeting's and State Specific Information

Moderators: IMC, Club Staff

User avatar
ObsidianRadio
Oldtimer
Posts: 2050
jedwabna poszewka promocja
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

kiz wrote:
ObsidianRadio wrote:
Can we just wait until my timing belt change? I won't risk such a drive until it's done :/

well that all depends on me and my time schedule ;)
Well let me know when you get it done, cos with my work I have to give at least 2 weeks notice ;)
Tim, when are you soonest available? :lol:
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
User avatar
okamitengu
Grease Monkey
Posts: 317
Joined: Sun Oct 03, 2010 11:37 pm

Re: Victor Harbour Cruise

Post by okamitengu »

i heard he had a cancellation of some cruise thing on the weekend of the 12th...

lol

:twisted:
User avatar
kiz
SA Coordinator
Posts: 2178
Joined: Wed Nov 09, 2011 10:09 pm
Location: Adelaide, South Australia

Re: Victor Harbour Cruise

Post by kiz »

okamitengu wrote:i heard he had a cancellation of some cruise thing on the weekend of the 12th...

lol

:twisted:
Yea 12th is postponed until further notice, my car isnt ready, Jack's isn't ready and so easiest if we put it off, otherwise we could be towing 2 ftos home after the cruise haha.

I just need the new ignition leads in mine but Jack's takes a bit longer to do ;)
There are two types of people on forums; those that give helpful advice, and the others

1998 Mitsubishi FTO GPVR AERO ;)
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

kiz wrote:
okamitengu wrote:i heard he had a cancellation of some cruise thing on the weekend of the 12th...

lol

:twisted:
Yea 12th is postponed until further notice, my car isnt ready, Jack's isn't ready and so easiest if we put it off, otherwise we could be towing 2 ftos home after the cruise haha.

I just need the new ignition leads in mine but Jack's takes a bit longer to do ;)
By the time I'm ready, your bumpers will be ready :P
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
User avatar
kiz
SA Coordinator
Posts: 2178
Joined: Wed Nov 09, 2011 10:09 pm
Location: Adelaide, South Australia

Re: Victor Harbour Cruise

Post by kiz »

ObsidianRadio wrote:
kiz wrote:
okamitengu wrote:i heard he had a cancellation of some cruise thing on the weekend of the 12th...

lol

:twisted:
Yea 12th is postponed until further notice, my car isnt ready, Jack's isn't ready and so easiest if we put it off, otherwise we could be towing 2 ftos home after the cruise haha.

I just need the new ignition leads in mine but Jack's takes a bit longer to do ;)
By the time I'm ready, your bumpers will be ready :P
Provided we don't hit any roadblocks with them. I've got got slim plates, rear plate lights ordered from America, all the lights. Only problems that can happen now is the painter and the fitting... :roll:. But can't see any problems fitting since mines facelift, i know there are fitting problems from pre-facelift to the new bar ;)
There are two types of people on forums; those that give helpful advice, and the others

1998 Mitsubishi FTO GPVR AERO ;)
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

kiz wrote:
ObsidianRadio wrote:
kiz wrote:
okamitengu wrote:i heard he had a cancellation of some cruise thing on the weekend of the 12th...

lol

:twisted:
Yea 12th is postponed until further notice, my car isnt ready, Jack's isn't ready and so easiest if we put it off, otherwise we could be towing 2 ftos home after the cruise haha.

I just need the new ignition leads in mine but Jack's takes a bit longer to do ;)
By the time I'm ready, your bumpers will be ready :P
Provided we don't hit any roadblocks with them. I've got got slim plates, rear plate lights ordered from America, all the lights. Only problems that can happen now is the painter and the fitting... :roll:. But can't see any problems fitting since mines facelift, i know there are fitting problems from pre-facelift to the new bar ;)
I reckon they could even fit them for you at the paint shop if you want to save Tim the trouble? :lol:
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
User avatar
kiz
SA Coordinator
Posts: 2178
Joined: Wed Nov 09, 2011 10:09 pm
Location: Adelaide, South Australia

Re: Victor Harbour Cruise

Post by kiz »

Yea that's an option, depends how much they can fit them for ;)
There are two types of people on forums; those that give helpful advice, and the others

1998 Mitsubishi FTO GPVR AERO ;)
User avatar
Vectose
Forum Moderator
Posts: 3947
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Victor Harbour Cruise

Post by Vectose »

To do the front bar it's just remove the reo from the old bar and put it on the new one, it literally took me 10 minutes.

With the Rear bar though, the holes need to be drilled for the main reo. The tabs for the main reo on the bar I got were sticking too far out, so when I got it all on the car the holes wouldn't line up to bolt it in so I had to grind the tabs back a bit.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

Vectose wrote:To do the front bar it's just remove the reo from the old bar and put it on the new one, it literally took me 10 minutes.

With the Rear bar though, the holes need to be drilled for the main reo. The tabs for the main reo on the bar I got were sticking too far out, so when I got it all on the car the holes wouldn't line up to bolt it in so I had to grind the tabs back a bit.
...What's a reo? :lol:
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
User avatar
Vectose
Forum Moderator
Posts: 3947
Joined: Sun Nov 28, 2010 8:45 pm
Location: Newcastle

Re: Victor Harbour Cruise

Post by Vectose »

The metal reinforcements that attach to the bars and the car.
Bennoz wrote:
Technikhaus wrote:What is in said Bens big penis by the way?
A whoooole lot 'o jism 8)
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Re: Victor Harbour Cruise

Post by vipfto »

ObsidianRadio wrote:
Vectose wrote:To do the front bar it's just remove the reo from the old bar and put it on the new one, it literally took me 10 minutes.

With the Rear bar though, the holes need to be drilled for the main reo. The tabs for the main reo on the bar I got were sticking too far out, so when I got it all on the car the holes wouldn't line up to bolt it in so I had to grind the tabs back a bit.
...What's a reo? :lol:
A KIA :lol:
FTO GR-TURBO
172KW ATW @ 11PSI
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

vipfto wrote:
ObsidianRadio wrote:
Vectose wrote:To do the front bar it's just remove the reo from the old bar and put it on the new one, it literally took me 10 minutes.

With the Rear bar though, the holes need to be drilled for the main reo. The tabs for the main reo on the bar I got were sticking too far out, so when I got it all on the car the holes wouldn't line up to bolt it in so I had to grind the tabs back a bit.
...What's a reo? :lol:
A KIA :lol:
Is't it Rio? :tongue:
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: Victor Harbour Cruise

Post by bjk »

ObsidianRadio wrote:
vipfto wrote:
ObsidianRadio wrote:
Vectose wrote:To do the front bar it's just remove the reo from the old bar and put it on the new one, it literally took me 10 minutes.

With the Rear bar though, the holes need to be drilled for the main reo. The tabs for the main reo on the bar I got were sticking too far out, so when I got it all on the car the holes wouldn't line up to bolt it in so I had to grind the tabs back a bit.
...What's a reo? :lol:
A KIA :lol:
Is't it Rio? :tongue:
Is't it Isn't? :cheeky:
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
User avatar
kiz
SA Coordinator
Posts: 2178
Joined: Wed Nov 09, 2011 10:09 pm
Location: Adelaide, South Australia

Re: Victor Harbour Cruise

Post by kiz »

Ok so i reckon we try and get a cruise done this coming weekend. I got the 17th, 18th, 19th. I have an 18th saturday night in adelaide (going to casino, strip clubs, nightclubs etc etc). But still up for a cruise wherever, or still to Victor Harbour?
There are two types of people on forums; those that give helpful advice, and the others

1998 Mitsubishi FTO GPVR AERO ;)
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

kiz wrote:Ok so i reckon we try and get a cruise done this coming weekend. I got the 17th, 18th, 19th. I have an 18th saturday night in adelaide (going to casino, strip clubs, nightclubs etc etc). But still up for a cruise wherever, or still to Victor Harbour?
We have an 18th saturday night too :lol:

On the plus side, we'd be keen for a cruise sunday, but no photoshoot, our cars look like sh*t at the moment :lol:
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
User avatar
kiz
SA Coordinator
Posts: 2178
Joined: Wed Nov 09, 2011 10:09 pm
Location: Adelaide, South Australia

Re: Victor Harbour Cruise

Post by kiz »

ObsidianRadio wrote:
kiz wrote:Ok so i reckon we try and get a cruise done this coming weekend. I got the 17th, 18th, 19th. I have an 18th saturday night in adelaide (going to casino, strip clubs, nightclubs etc etc). But still up for a cruise wherever, or still to Victor Harbour?
We have an 18th saturday night too :lol:

On the plus side, we'd be keen for a cruise sunday, but no photoshoot, our cars look like sh*t at the moment :lol:
we'll see how my problem goes with my fto now as to whether it makes it to adelaide next weekend...
There are two types of people on forums; those that give helpful advice, and the others

1998 Mitsubishi FTO GPVR AERO ;)
User avatar
PHIL069
Oldtimer
Posts: 4719
Joined: Sun Sep 20, 2009 5:00 pm
Location: Central Coast > South Australia

Re: Victor Harbour Cruise

Post by PHIL069 »

I'm coming too, I got me a bottle of Jim Beam to collect in SA ;)
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

PHIL069 wrote:I'm coming too, I got me a bottle of Jim Beam to collect in SA ;)
Banned from the eastern bottle-o's are we Phil? ;)
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
User avatar
kiz
SA Coordinator
Posts: 2178
Joined: Wed Nov 09, 2011 10:09 pm
Location: Adelaide, South Australia

Re: Victor Harbour Cruise

Post by kiz »

ObsidianRadio wrote:
PHIL069 wrote:I'm coming too, I got me a bottle of Jim Beam to collect in SA ;)
Banned from the eastern bottle-o's are we Phil? ;)
Haha, na he's coming to collect his IOU ;)
There are two types of people on forums; those that give helpful advice, and the others

1998 Mitsubishi FTO GPVR AERO ;)
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:

Re: Victor Harbour Cruise

Post by ObsidianRadio »

kiz wrote:
ObsidianRadio wrote:
PHIL069 wrote:I'm coming too, I got me a bottle of Jim Beam to collect in SA ;)
Banned from the eastern bottle-o's are we Phil? ;)
Haha, na he's coming to bring you a few boxes of Krispy Kremes ;)
BRILLIANT. CHEERS PHIL! :thumleft:
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
Post Reply