NSW - Help Needed - Stock exhaust and air intake

Anything off topic that you want to share with the group. (warning this board may include coarse language)

Moderators: IMC, Club Staff

User avatar
rock_it
Oldtimer
Posts: 6599
jedwabna poszewka promocja
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

Hi all,

Long story short, my car was reported to the EPA. I need a stock exhaust, and intake (Box + Filter) as I have to go over the pits.

Anyone got either or all in Sydney .. Close to 2224 or 2567?

I need to have installed on Sunday 4th ...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Astron_Boy
Trolling Gen Y
Posts: 8400
Joined: Sun May 27, 2007 5:00 pm
Location: Wine Country NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by Astron_Boy »

All aftermarket here sorry.

That sucks.
Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

Bugger... Gonna have to pay ... :(

Just what I needed...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
FTOwnage
Mechanic
Posts: 648
Joined: Tue Oct 09, 2012 11:15 am
Location: Newcastle

Re: NSW - Help Needed - Stock exhaust and air intake

Post by FTOwnage »

I've got an box and filter lying in my garage.

I'm up in Newcastle though.
FTO GPvR 6A13 Single Turbo (Almost finished....)
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

Yeah a bit too far.. Was up there the other weekend.. D'oh..

But thanks anyway..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Akys
Manual Conversion
Posts: 430
Joined: Tue Mar 08, 2011 1:29 am
Location: Western Sydney

Re: NSW - Help Needed - Stock exhaust and air intake

Post by Akys »

Pretty sure I have box and filter lying in my garage. 2750. Penrith. approx 35mins from camden.
User avatar
Taz
Oldtimer
Posts: 3995
Joined: Wed Jan 05, 2011 11:50 am
Location: Your mothers house

Re: NSW - Help Needed - Stock exhaust and air intake

Post by Taz »

I have a everything you need stock, inc full exhaust, but im in brisbane, you probably dont want to cop the 55 postage. (you can have the exhaust for free if you want to pay shipping)
Just got a crate overnight from sydney too, so itll be there by the 4th if you want me to send it tomorrow. Let us know
Image
Bennoz wrote: Cum gunt it!
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

PM sent Taz..

Thanks for helping man.. This whole experience has been an actual sh*t of a thing.. A long story..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

Wooooo freakin hoooooo ...

Parts arrived today at work ... Already loaded and ready to play ... Will have to wait till Sunday though ... 8)

Image
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Taz
Oldtimer
Posts: 3995
Joined: Wed Jan 05, 2011 11:50 am
Location: Your mothers house

Re: NSW - Help Needed - Stock exhaust and air intake

Post by Taz »

Glad to hear it got there in time. I was worried it was gonna murphy's law and take 10 days... :lol:

Note the professional cable tie job 8)

EDIT: oh - and i opted for the $50 insurance as well, so if anything is damaged its free to claim up to $50... :lol:
Image
Bennoz wrote: Cum gunt it!
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

lol ..

With a cable tie job like that, you should move into modifying drift cars... :lol:
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Astron_Boy
Trolling Gen Y
Posts: 8400
Joined: Sun May 27, 2007 5:00 pm
Location: Wine Country NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by Astron_Boy »

Image no work bruddah.

Good to hear you are sorted however.

Speaking of the EPA however, I want to make a report against the fkn Cicadas outside the front of my house.
I have to live in this environment also, and those fkn things going non stop for 5hrs hurts me more than a car passing by within 1 minute
Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

Not sure why the image broke..

Anyway.. Been looking at welds on the pipe.. not sure if it is stock.. Would have thought they just bent it from the factory..

But yeah will suss it out tomorrow..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Taz
Oldtimer
Posts: 3995
Joined: Wed Jan 05, 2011 11:50 am
Location: Your mothers house

Re: NSW - Help Needed - Stock exhaust and air intake

Post by Taz »

should be stock apart from the tip at the end. Has the stock chamber at the end, and piping looks old and stock.
Id be surprised if it isnt!
Image
Bennoz wrote: Cum gunt it!
User avatar
aza013
NSW Coordinator
Posts: 9088
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by aza013 »

It looks like as Taz said the tip has been changed, but the rest looks stock.
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by rock_it »

Cool... Been a while since I have seen a stock exhaust.. Lolz..

Only a few hours to go.. I have a spare double garage across from me as well.. So we have parking for ya Aza.. Just give me a buzz when you here and I will buzz ya in...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
SchumieFan
Oldtimer
Posts: 5875
Joined: Thu Aug 05, 2004 5:00 pm
Location: GPS signal lost
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by SchumieFan »

WHAT AN EPIC DAY!
Image
User avatar
SchumieFan
Oldtimer
Posts: 5875
Joined: Thu Aug 05, 2004 5:00 pm
Location: GPS signal lost
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by SchumieFan »

after stripping the cat's from 3 other FTO's and a bit of pursueding to get the muffler in we finally got it all bolted on only to realise we didnt have bolts long enough to bolt the muffler up...

9 hours
Image
User avatar
Astron_Boy
Trolling Gen Y
Posts: 8400
Joined: Sun May 27, 2007 5:00 pm
Location: Wine Country NSW
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by Astron_Boy »

wow.
Image
User avatar
SchumieFan
Oldtimer
Posts: 5875
Joined: Thu Aug 05, 2004 5:00 pm
Location: GPS signal lost
Contact:

Re: NSW - Help Needed - Stock exhaust and air intake

Post by SchumieFan »

Astron_Boy wrote:wow.
tell me bout it!

Taz's cat was busted, we stripped Long's out... but taz's stud bolts and holes werent the same and his was about an inch longer then the Taz's, which was 34cm. had to put Long's back on his car.

Craig's was a high flow and welded onto his system anyway, it was 34.5cm

Aza's cat was also 34.5cm but had been made into a high flow, so couldnt use that

Lawso dropped his car round, he had an aftermarket cat on that was near new and 35cm but had no temp sensor.

so we swapped out lawso's, put a high flow on his, jimmy'd up the temp sensor, put his cat on Craig's car and then realised we couldnt bolt the arse end up...

All the Cats were completely different and had completely different ways to mount, some had studs, some didnt,
ITS SO CONFUSING!

fkn long day
Image
Post Reply