Fix Aza's FTO day (22/3/2014)
Moderators: IMC, Club Staff
- Bennoz
- National President
- Posts: 23673
- jedwabna poszewka promocja
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
I have one here Aza if you want. Brand new, sitting on the box for 12 months now, its yours if you want it.
Yep, it just didn't want to go. I want to double check my clutch alignment & have another go with the hoist.
In the mean time, check out the damage it did to my arm lol. Bruises will be up tomorrow!
Yep, it just didn't want to go. I want to double check my clutch alignment & have another go with the hoist.
In the mean time, check out the damage it did to my arm lol. Bruises will be up tomorrow!
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: Fix Aza's FTO day (22/3/2014)
HahahahahahahahahahahahahahahahahahahHhHaaaAaaaaaaaaAaaaaaaaaaaa
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
- Bennoz
- National President
- Posts: 23673
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
destinationtoby wrote:HahahahahahahahahahahahahahahahahahahHhHaaaAaaaaaaaaAaaaaaaaaaaa
Broke it!
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: Fix Aza's FTO day (22/3/2014)
Bennoz wrote: Yep, it just didn't want to go. I want to double check my clutch alignment & have another go with the hoist.
/quote]
destinationtoby wrote:I did this about 20 times...Bennoz wrote:Soft. I lift it in by hand.
But it stops, leaving a gap between the block and housing of about a cm..
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
- Bennoz
- National President
- Posts: 23673
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
Soft!destinationtoby wrote:Bennoz wrote: Yep, it just didn't want to go. I want to double check my clutch alignment & have another go with the hoist.
/quote]
destinationtoby wrote:I did this about 20 times...Bennoz wrote:Soft. I lift it in by hand.
But it stops, leaving a gap between the block and housing of about a cm..
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: Fix Aza's FTO day (22/3/2014)
that's what u wrote after I resorted to using a hoist the first time I'd ever gone near a gearbox lol
Now look, big mr gearbox himself has gone SOFT !
Now look, big mr gearbox himself has gone SOFT !
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: Fix Aza's FTO day (22/3/2014)
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
- Sahin
- HULK
- Posts: 5518
- Joined: Wed Oct 05, 2011 10:38 pm
- Location: Up to me nuts in boys guts
Re: Fix Aza's FTO day (22/3/2014)
He doesnt need a hoist for his car he's saying lol
he has a different engine after all
he has a different engine after all
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: Fix Aza's FTO day (22/3/2014)
Needs hoist to put the box back in ya nitSahin wrote:He doesnt need a hoist for his car he's saying lol
he has a different engine after all
As did I, after 3fuking hours of a dodgy jack and trying to slot it in on my own
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
Have we missed the window for the bonfire? Wish I could get down there to help. Am in Coffs atm
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
Sounds good thanks. Just tally up the cost for the parts mate and I will fix you up for them.Bennoz wrote:I have one here Aza if you want. Brand new, sitting on the box for 12 months now, its yours if you want it.
Yep, it just didn't want to go. I want to double check my clutch alignment & have another go with the hoist.
In the mean time, check out the damage it did to my arm lol. Bruises will be up tomorrow!
As for your arm, I have a matching arm as well. But my one is just cuts and scratches.
- Bennoz
- National President
- Posts: 23673
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
How is everyone for next weekend at some stage? Plus the hoist...
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
I'm good for next weekend.
I had something on but it fell through last week.
I had something on but it fell through last week.
- fraz91
- Hair-do
- Posts: 881
- Joined: Sun Jan 17, 2010 6:00 pm
- Location: 4wding over you, Sydney
Re: Fix Aza's FTO day (22/3/2014)
I should be fine for sat arvo, sunday is an issue cause dan and I are taking the silver pos to canberra
I'll have an FTO one day... i swear!
until then:
1. 2001 Merc-Benz A160 (porta-loo on wheels)
2. 2007 Peugeot 307 TDi (more fun than you'd expect)
3. [url=ttp://ftoaustralia.com/v3/viewtopic.php?f=29&t=25373]2009 Mitsubishi Triton Di-D (a monster in its own right)[/url]
4. 1992 Nissan NX Coupe (club car and project car)
5. 1996 Holden SB Barina - "The Nugget"
6. 1996 Jeep XJ Cherokee Sport - The Budget Build
7. 2010 Toyota Landcruiser 76 Series - V8 Goodness... - Build coming soon.
8. 1990 Audi 90 manual - The delightfully dignified daily driver
until then:
1. 2001 Merc-Benz A160 (porta-loo on wheels)
2. 2007 Peugeot 307 TDi (more fun than you'd expect)
3. [url=ttp://ftoaustralia.com/v3/viewtopic.php?f=29&t=25373]2009 Mitsubishi Triton Di-D (a monster in its own right)[/url]
4. 1992 Nissan NX Coupe (club car and project car)
5. 1996 Holden SB Barina - "The Nugget"
6. 1996 Jeep XJ Cherokee Sport - The Budget Build
7. 2010 Toyota Landcruiser 76 Series - V8 Goodness... - Build coming soon.
8. 1990 Audi 90 manual - The delightfully dignified daily driver
Astron_Boy wrote:No correction needed Gen Y, you are correct.
Bennoz wrote:My rubbing happens on the inside.
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
I'm in for either day... Ben and I put his gearbox in by hand last time without much trouble so I'm fucked as to why aza had to be a pain in the arse!
- Bennoz
- National President
- Posts: 23673
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
Yep, I've done half a dozen with just jacks. Annoyed at this one.
Found my spare slave too Az. Don't throw out the old one, need to transfer the plunger pin.
Found my spare slave too Az. Don't throw out the old one, need to transfer the plunger pin.
- destinationtoby
- Broke it
- Posts: 3503
- Joined: Sat Nov 24, 2012 11:05 pm
- Location: mid north coast
Re: Fix Aza's FTO day (22/3/2014)
Bennoz wrote:Yep, I've done half a dozen with just jacks. Annoyed at this one.
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
Yes I have a tight box it's still a virgin lol
That look great Ben .
Thank you.
That look great Ben .
Thank you.
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
Whats the story behind that one. Looks impressive.In the mean time, check out the damage it did to my arm lol. Bruises will be up tomorrow!
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Fix Aza's FTO day (22/3/2014)
That may have been from the battery tray bracket. Took it out after about the 6-7th try to put the box in