Just saw this pic of a guy doing a sim for a nissan, might be a better way of going about it + Cheaper and easier to setup a screen for it..
- 12042703_990059717712776_2224593097326828343_n.jpg (65.33 KiB) Viewed 470 times
Project Sim
Moderators: IMC, Club Staff
-
silverGPX
- 9.5"
- Posts: 6793
- jedwabna poszewka promocja
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Project Sim
Hi Dwayne,
Just saw this pic of a guy doing a sim for a nissan, might be a better way of going about it + Cheaper and easier to setup a screen for it..
Just saw this pic of a guy doing a sim for a nissan, might be a better way of going about it + Cheaper and easier to setup a screen for it..
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
Bahahahahaha.
Have already got one of those in the shed in exactly that config although ive used the actual FTO floor pan and cut with an angle grinder. Takes an xbox wheel. Wanted something more realistic though.
At the moment the front windscreen can be removed as ive cut it out. Only put it back to keep the dust and critters out, so can set up a monitor just behind the vents. Ill build a platform to support it.
Have already got one of those in the shed in exactly that config although ive used the actual FTO floor pan and cut with an angle grinder. Takes an xbox wheel. Wanted something more realistic though.
At the moment the front windscreen can be removed as ive cut it out. Only put it back to keep the dust and critters out, so can set up a monitor just behind the vents. Ill build a platform to support it.
Complete FTO (http://www.completefto.com.au/completefto.asp) 
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
OK, so made some more progress:
Gear Shifter is bolted in. Because the FTO manual shifter is cable driven and there is no gearbox, I couldnt use the stock shifter. Looked into it, but as the shifter doesnt stick to a H pattern when there isnt a gearbox attached,there is no easy way to make it remote control the Logitech shifter unit.
Just got to finish making the custom stereo surround and wire in the stereo now.
Have also got the pedals sorted. This has taken quite a bit of work and no small amount of engineering.See how many FTO parts you can pick in the pictures....
Happy with the accelerator pedal as that feels about right, but the clutch needs a little more resistance and the brake pedal needs a lot more.I think im going to have to put some heavy duty springs under the pedals to sort this as I cant really put anymore stress on the pedal unit without risking breaking it.
Anyway, havent tested it yet, but no reason why it shouldnt work now.
Gear Shifter is bolted in. Because the FTO manual shifter is cable driven and there is no gearbox, I couldnt use the stock shifter. Looked into it, but as the shifter doesnt stick to a H pattern when there isnt a gearbox attached,there is no easy way to make it remote control the Logitech shifter unit.
Just got to finish making the custom stereo surround and wire in the stereo now.
Have also got the pedals sorted. This has taken quite a bit of work and no small amount of engineering.See how many FTO parts you can pick in the pictures....
Happy with the accelerator pedal as that feels about right, but the clutch needs a little more resistance and the brake pedal needs a lot more.I think im going to have to put some heavy duty springs under the pedals to sort this as I cant really put anymore stress on the pedal unit without risking breaking it.
Anyway, havent tested it yet, but no reason why it shouldnt work now.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
Vectose
- Forum Moderator
- Posts: 3952
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: Project Sim
Haha. Nice work.
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
-
bjk
- Totes
- Posts: 5753
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: Project Sim
Surely if you can make one of these you can make your Version R AWD. 
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
-
Strkszone
- Grease Monkey
- Posts: 346
- Joined: Mon May 05, 2014 5:19 pm
- Location: Wollongong, NSW
Re: Project Sim
hehehe FTO Evolution :3...
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
Possibly.If I could be stuffed.bjk wrote:Surely if you can make one of these you can make your Version R AWD.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Project Sim
Stuffed with what...dstocks wrote:Possibly.If I could be stuffed.bjk wrote:Surely if you can make one of these you can make your Version R AWD.
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
-
Strkszone
- Grease Monkey
- Posts: 346
- Joined: Mon May 05, 2014 5:19 pm
- Location: Wollongong, NSW
Re: Project Sim
With an Evo 6 driveshaft 
...
...-
Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: Project Sim
That looks awesome. If it's done for the bonfire we should all chop in five or ten bucks a go and have some prizes
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
-
Chebus
- Grease Monkey
- Posts: 361
- Joined: Sun Jun 30, 2013 3:10 pm
- Location: sunshine coast
Re: Project Sim
This x10Daniel2019 wrote:
That looks awesome. If it's done for the bonfire we should all chop in five or ten bucks a go and have some prizes
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
Should have all the bugs ironed out by then
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
silverGPX
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Project Sim
What u gonna do for audio? Aux in and speakers in the doors?
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
Correct. I have a 12 volt transformer.Ill wire it into the loom so dash lights,stereo etc work and AUX in the audio and use the car speakers for sound
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
ITS ALIVE MWAHAHAHAHA....
Got the transformer feeding the electrics. Climate control display on ODO on and most of the illumination working.
First Electric FTO EVA
Got the transformer feeding the electrics. Climate control display on ODO on and most of the illumination working.
First Electric FTO EVA
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
bjk
- Totes
- Posts: 5753
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: Project Sim
2nddstocks wrote:ITS ALIVE MWAHAHAHAHA....
Got the transformer feeding the electrics. Climate control display on ODO on and most of the illumination working.
First Electric FTO EVA
But nice work!
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
Ahhhh, of course, should have thought of that
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
Yep, will do. Didnt get a chance to get them today.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Project Sim
Some new pics:
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you