Page 6 of 10
Posted: Fri May 21, 2004 3:37 pm
by smorison
GPXXX wrote:Steve, i liked your 'artistic' touch on the rubber intake tube from last weekend @ Wakefield... hehehehe
haha yeah the battery acid on the intake made a very interesting pattern didn't it
note to self: never race again with a brand new battery
Posted: Tue May 25, 2004 1:00 pm
by Jono
hey steve,
UAS FTO COLD AIR RAM POD KIT
DESCRIPTION COMPLETE KIT - INCLUDES:
-CUSTOM RUBBER BIG MOUTH INTAKE KIT
-HOSE CLAMPS
-PLASTIC FITTING FOR CRANK CASE BREATHER
-SILICON HOSE
-PLASTIC COLD AIR BOX WITH LID
-UAS UNIFILTER POD FILTER
AVAILABLE FOR MIVECS ONLY. FTO GR'S USE A FLEXIBLE BLACK CORRIGATED HOSE.
=========
With the Silicon hose, My kit included a corrigate hose, and so did boris's
should the hose be silicon?
jono
Posted: Tue May 25, 2004 2:02 pm
by SilentBob
i think i remember which bits steve gave you at wakefield and the hoses were...
silicon hose(i think you both got blue ones...) is from pod->engine
the corrogated hose is the cold air feed which you send down to the front bar....
with the GR's they dont use the silicon hose due to the MAS sensor, and instead use the same/similar hose as what the cold air feed hose is.....
(thus reducing its prettyness and effectivness somewhat i would imagine)
SilentBob
Posted: Tue May 25, 2004 4:44 pm
by Jono
oh ok,
yeah boris picked it up for me.
I thought it said "Custom Rubber intake" for the engine intake pipe
and
Silicon hose - For the Cold air feed pipe?
is that it?>
Jono
Posted: Tue May 25, 2004 5:13 pm
by smorison
Jono wrote:oh ok,
yeah boris picked it up for me.
I thought it said "Custom Rubber intake" for the engine intake pipe
and
Silicon hose - For the Cold air feed pipe?
is that it?>
Jono
blue silcon hose = crank case breather
1 meter ribbed hose = snorkle
Posted: Thu May 27, 2004 2:54 am
by Jono
oh ok... just wasnt sure,
I thuoght Crank case breather was
"PLASTIC FITTING FOR CRANK CASE BREATHER"
Jono
Posted: Fri May 28, 2004 11:54 pm
by TimmyD
sooo have u got all the parts yet? or even better have they been sent off yet??
Tim
Posted: Tue Jun 01, 2004 7:53 pm
by Supplanter
Any news for us interstaters?
Posted: Wed Jun 09, 2004 4:01 pm
by TimmyD
ECHO.... ECHo..... ECho.... Echo.... echo.......
is anyone out there....is anyone out there....is anyone out there....is anyone out there.......................
Posted: Wed Jun 09, 2004 11:15 pm
by Slither
I'm aware that i missed the boat on the group buy for this but do u know when it is going to b available in the fto shop? Id like to pick one up!!
Posted: Thu Jun 10, 2004 12:58 pm
by Jono
Hey steve,
any news on my breather pipe?
Jono
Posted: Thu Jun 10, 2004 8:26 pm
by Supplanter
My guess is that smorison has been very busy with the Mallacoota trip, the club launch, and moving the web server and hasn't gotten around to organising the new pipes... either that, or he ran off to Mexico with all our money
Posted: Tue Jun 15, 2004 3:15 pm
by smorison
Supplanter wrote:My guess is that smorison has been very busy, or he ran off to Mexico with all our money
LOL
unique's supplier who do the rubber extrusion have been very slack... they have some arriving in the next few days. i know UAs are on the phone to them everyday to fix this
Posted: Sat Jun 19, 2004 7:30 pm
by fto12345
Hello,
Sorry but I have been out of it for a while.
I need to change my air filter but the one I bought from K&N is only a 3" filter but obviously I can't use the standard air intake pipe. So I need to change the pipe and the filter as well.
Give me what options I have in changing these..
I want to change the pipe, the filter and the heat shield.
What kind of prices am I looking at for these?
And if I am going to replace the pipe, do I need to relocate the battery?
If there are any other pics, please post and do I have to go through the FTO shop to purchse these or direct from UAS?
Thanks,
Posted: Sat Jun 19, 2004 7:39 pm
by EURO
there is a DIY job, posted on the site to do this.... the guy bought a 3inch piping and it looks great, or purchase through UAS and everything is a direct bolt on....
you dont need to move the battery with either purchase, its just a straight replacement
Posted: Fri Jun 25, 2004 12:37 pm
by jez001
Any updates on the kits anyone?
Posted: Tue Jul 06, 2004 8:57 pm
by Supplanter
I ordered mine in blue, and apparently UAS have the blue pipes, so can I please have mine now?
Pretty please?
I'll be your friend
How much interest are making off our payments anyway?
Do I have to send the boys around?
Posted: Wed Jul 07, 2004 10:14 am
by smorison
Supplanter wrote:I ordered mine in blue, and apparently UAS have the blue pipes, so can I please have mine now?
Pretty please?
I'll be your friend
How much interest are making off our payments anyway?
Do I have to send the boys around?
give them a call and they will ship it out to you immediately...
Posted: Wed Jul 07, 2004 3:05 pm
by rxboy
Just gave UAS a call. They told me that they got 2 more of the black intake pipes and are expecting the rest of them shortly. But I asked to change mine to blue anyways so that I can get it mailed to me ASAP.
Posted: Fri Jul 16, 2004 4:18 pm
by TimmyD
sooo wats the deal with these?
have they even arrived at UAS yet??
and rxboy have u gotten yours yet?
Regards,
Tim