Posted: Mon Jan 30, 2006 6:44 pm
i thought it would be group buy lol 
FTO AUSTRALIA
Welcome to the f**king old FTO Australia forums!!
https://ftoaustralia.com/v3/
**UPDATE:** EOI/Group Buy - Centre Console Bit - In CF
Page 2 of 8
Posted: Mon Jan 30, 2006 6:47 pm
Which part will be missing? The ashtray back bit or the cigarette lighter or both?
Posted: Mon Jan 30, 2006 8:18 pm
Its the ashtray part.
It will b flat/curved. There will be a hole for the lighter/12v thingy.
So for $150, u get the centre console surround made in CF:
Just add your name to the list:
EOI/Group Buy:
1.
2.
3.
4.
5.
etc
Scarecrow? Chris? Shue? - chu know u want it
It will b flat/curved. There will be a hole for the lighter/12v thingy.
So for $150, u get the centre console surround made in CF:
Just add your name to the list:
EOI/Group Buy:
1.
2.
3.
4.
5.
etc
Scarecrow? Chris? Shue? - chu know u want it
Posted: Mon Jan 30, 2006 8:56 pm
i'll be first 
1. TimmyD
2.
3.
4.
5.
1. TimmyD
2.
3.
4.
5.
Posted: Mon Jan 30, 2006 9:01 pm
man i want it but i gotta save my $$ for my respray. maybe catch u to get one made for me later on ken
Posted: Mon Jan 30, 2006 9:23 pm
why not just get the whole cf interior kit from UAS? http://www.uniqueautosports.com.au/pric ... bonkit.jpg
quite a bit extra but it does have 12 pieces for console + door
http://www.uniqueautosports.com.au/pric ... bonkit.jpg 
quite a bit extra but it does have 12 pieces for console + door
Posted: Mon Jan 30, 2006 10:51 pm
these are like stickers...not made in CF like this...SG wrote:why not just get the whole cf interior kit from UAS?
quite a bit extra but it does have 12 pieces for console + door
Posted: Mon Jan 30, 2006 11:16 pm
*Scratches head and contemplates breaking plastic surround*
.....It'd give me an excuse to get this!!
.....It'd give me an excuse to get this!!
Posted: Tue Jan 31, 2006 12:43 am
ohkhunjeng wrote:these are like stickers...not made in CF like this...SG wrote:why not just get the whole cf interior kit from UAS?
quite a bit extra but it does have 12 pieces for console + door
the others are stickers?
was looking forward to getting them
well count me in for this...in a couple weeks
Posted: Tue Jan 31, 2006 12:58 am
I would put my name down but would really like to get the dial surround same time since right now they are matching colours and would look dumb otherwise. 
Posted: Tue Jan 31, 2006 2:38 am
Can this dude make the top part as well that holds the clock etc. At the moment both of those pieces are blue in my car and I think it might be weird having CF only half way. If I could get both I'm in.
Posted: Tue Jan 31, 2006 7:35 am
ya I tend to agree...If I only get the bottom part in CF and the top stays the same black its gonna be a little anoyying for me to look at...Cos this is "curvey" it might be harder to do..If the price was like < 350 for both i'd be in...
Posted: Tue Jan 31, 2006 10:48 am
That top part that holds the climate control/two dials.....how many of you have actually pulled that out??
It is by no means a small peice of plastic....recreating this in carbon fibre would be difficult and time consuming. Not to mention expensive.
You would be better off buying this peice and then getting the dashboard centre to coat/treat/whatever the upper part, this would keep the costs down but maintain a constant carbon fibre look the whole way up the dash.
EDIT: Hell, come to think of it you could probably do the centre bit, then coat the entire middle console/gearbox tunnel in CF cover to give it a really awesome look!
It is by no means a small peice of plastic....recreating this in carbon fibre would be difficult and time consuming. Not to mention expensive.
You would be better off buying this peice and then getting the dashboard centre to coat/treat/whatever the upper part, this would keep the costs down but maintain a constant carbon fibre look the whole way up the dash.
EDIT: Hell, come to think of it you could probably do the centre bit, then coat the entire middle console/gearbox tunnel in CF cover to give it a really awesome look!
Posted: Tue Jan 31, 2006 10:55 am
If it's the same as the orginal in CF less ashtray..........
For $150 count me in.
1. TimmyD
2. Breza
3.
4.
5.
etc
Cheers
Chris
For $150 count me in.
1. TimmyD
2. Breza
3.
4.
5.
etc
Cheers
Chris
Posted: Tue Jan 31, 2006 11:54 am
guys i know the supplier personally and have also got few engine bay bits made from him. the quality of his stuff is good and im sure mickey and bucket could vouce for it too. ive been pestering him to overlay my interior for me for ages. what i would say is get this and overlay just the aircon bit coz makin the top dial bit will be a b****
Posted: Tue Jan 31, 2006 3:12 pm
ive had mine cracked for the last 4 years... annoyed me for so long! im in
Posted: Tue Jan 31, 2006 5:39 pm
Are you serious? Oh, my god. I just creamed myself, and I thought that only Kaz's undercarriage would have that effect on me!rnbboi wrote:Its $150 a pop - not inc postage. Guys, this is in real CF, and its costing u less than the original plastic surround if you were to buy it now on ebay
How will it clip in? The same as the old one or a different way? What has been about the ashtray area, is it just being removed and replaced with like a flat CF surface??
Infact, I don't even f**king care, JUST SIGN ME UP!
1. SCARECROW!!!!!
2.
3.
4.
5.
edit: sorry i was excited. i read the part about the ashtray
1. Scarecrow
2. Timmy D
3. Breza
4. Leigh
5.
Posted: Tue Jan 31, 2006 5:58 pm
This won't take more then a month will it, because i'm bursting with eager keeness to have one of these babies in my car. I still have a few issues but, especially the one about how it will clip in? I mean, currently my broken surround is held in with cable ties quite securely (all the clips are snapped) but i'd prefer something easier to manage.
Postage will be a little expensive, it goes on cubic volume, not weight. So while the surroudn may weigh a couple of hundred grams the cost will be calculated on something mayb 4 - 5kilos ish. And it will need to be well secured.
In summary, oh god GIMME GIMME GIMME!
Postage will be a little expensive, it goes on cubic volume, not weight. So while the surroudn may weigh a couple of hundred grams the cost will be calculated on something mayb 4 - 5kilos ish. And it will need to be well secured.
In summary, oh god GIMME GIMME GIMME!
Posted: Tue Jan 31, 2006 6:09 pm
lol scarecrow...
this group buy will def go ahead once i get 5. YES - 5!
So 1 more, and wer alrdy on our way there.
Getting the top part in made in CF will be damn expensive, and i doubt that it can even be made, because theres simply too many curves. CF does not bend easily...
Guys, ill talk to him and see what he says. I will also try to find out how much it will cost to get it posted to each state.
But for now, this is how it stands:
$150 - Carbon Fibre Surround
1. Scarecrow
2. Timmy D
3. Breza
4. Leigh
5.
PS: For those who are deciding - just to speed things up - i say this will remain open for another week. Thanx.
this group buy will def go ahead once i get 5. YES - 5!
So 1 more, and wer alrdy on our way there.
Getting the top part in made in CF will be damn expensive, and i doubt that it can even be made, because theres simply too many curves. CF does not bend easily...
Guys, ill talk to him and see what he says. I will also try to find out how much it will cost to get it posted to each state.
But for now, this is how it stands:
$150 - Carbon Fibre Surround
1. Scarecrow
2. Timmy D
3. Breza
4. Leigh
5.
PS: For those who are deciding - just to speed things up - i say this will remain open for another week. Thanx.
Posted: Tue Jan 31, 2006 7:15 pm
1. Scarecrow
2. Timmy D
3. Breza
4. Leigh
5. Khun Jeng
2. Timmy D
3. Breza
4. Leigh
5. Khun Jeng