need mechanic

Cruises, Meeting's and State Specific Information

Moderators: IMC, Club Staff

User avatar
zhong
Apprentice
Posts: 48
jedwabna poszewka promocja
Joined: Thu Nov 30, 2006 6:00 pm
Location: Kingsford
Contact:

need mechanic

Post by zhong »

hi guys,

anyone knows good mechanic (know how to fix FTO that is :D ) in sydney area or should i take my car to mitsubishi workshop?

got 2 error messages from the ECU
14 TPS out of range
41 injector circuit sensor

and it keeps cutting out on cold start. i've adjusted the TPS, cleaned the stepper motor, reset the ECU and left it running for 10 mins. didn't work :x

thanks guys...

<img src="http://img263.imageshack.us/img263/6872/noobml9.jpg">
User avatar
jonowong
Oldtimer
Posts: 3420
Joined: Thu Jan 15, 2004 6:00 pm
Location: Sydney

Post by jonowong »

want to buy a tps?
User avatar
zhong
Apprentice
Posts: 48
Joined: Thu Nov 30, 2006 6:00 pm
Location: Kingsford
Contact:

Post by zhong »

nah jono,
i have 2 tps already, 1 from the old engine and the new one.
thanks anyway. :D
Image
User avatar
jonowong
Oldtimer
Posts: 3420
Joined: Thu Jan 15, 2004 6:00 pm
Location: Sydney

Post by jonowong »

does the error code go away when u swap the tps?
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Post by rock_it »

Try Ricol Automotive at Peakhurst... Norman St ...

They do all Jap cars, did the Evo conversion to my Hyundai, and are now building my Evo III ...
User avatar
zhong
Apprentice
Posts: 48
Joined: Thu Nov 30, 2006 6:00 pm
Location: Kingsford
Contact:

Post by zhong »

jonowong wrote:does the error code go away when u swap the tps?
nope, still showing up..... :x
don't know what else to do. lol :)
rock_it wrote:Try Ricol Automotive at Peakhurst... Norman St ...

They do all Jap cars, did the Evo conversion to my Hyundai, and are now building my Evo III ...

:) thanks rock_it

now, just wanna know your opinion guys.
between these two mechanics (Ricol and Unique) any ideas which one's know more about FTOs cos i've never been to any one of them :(
Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Post by rock_it »

Yeah, not sure which one would be best... I know lots of guys from Nissan Sylvia.com use Ricol and highly reccomend them too ...

So yeah, they don't b'sh*t you around and don't overcharge you ... They have worked with imports for ages .. So yeah ... Personally, I go no where else ...
User avatar
zhong
Apprentice
Posts: 48
Joined: Thu Nov 30, 2006 6:00 pm
Location: Kingsford
Contact:

Post by zhong »

took the car to Ricol this morning.
Collin had a look at it, an hour later, car's fixed.
Stupid stepper motor :x

Thanks to:
d_stocks for the engine :D
mr_charisma and khunjeng for the stepper info :D
jonowong for offering me a tps :D
rock_it :D

love to see my baby alright now.
by the way, saw you EVO in the workshop rock_it. when the beast gonna be ready?? :twisted:
Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Post by rock_it »

Yeah, not sure ...

No hurry ... Has been there for almost 12 months now ... Colin is the mechanic that I deal with mostly ... He really knows his stuff... Is good with the old dyno tune too ...

Glad it worked out for ya... I was going to drop in today, but ran out of time ...
User avatar
Ed_EViL
Grease Monkey
Posts: 156
Joined: Fri Dec 15, 2006 6:00 pm
Location: South Sydney

Post by Ed_EViL »

rock_it wrote:Try Ricol Automotive at Peakhurst... Norman St ...

They do all Jap cars, did the Evo conversion to my Hyundai, and are now building my Evo III ...
Evo conversion for a hyundai!?!

that's what my gf needs!!! :twisted:
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Post by rock_it »

Na got rid of the Hyundai ... Had it up to 238.1kw @ the wheels in the Sonata... So yeah, now on to an AWD platform ...

I had to go with early Evo Platform as the engine I have will only go in Evo 1-3 as from 4 and up the engine was changed... So yeah, went with the 3 ...
User avatar
jonowong
Oldtimer
Posts: 3420
Joined: Thu Jan 15, 2004 6:00 pm
Location: Sydney

Post by jonowong »

so what do you guys think of Ricol and its pricing?
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Post by rock_it »

I found them to be quite good ... They don't bullshit you around, and if something is wrong, they fix it right ...

I had other stuff done by dealers, and other mechanics around the area, and have used Ricol ever since... I think I have been going there for about 2-3 years now ... Have done the Hyundai/Evo conversion, building the Evo III, serviced my Commodore, Serviced my Cressida (almost did a 1j conversion there, but changed my mind), and will now be servicing the FTO ...

Only bad thing ... They don't have a courtesy car ... But they will drop you off at the train station and pick you up if needed...
User avatar
fto617
Veteran Mechanic
Posts: 1069
Joined: Thu Apr 29, 2004 5:00 pm
Location: Sydney

Post by fto617 »

try IS Motor racing down at Rockdale
they know about FTOs inside out since the day they were heaps rare
but now days, Evos and GTRs are like camrys that appear so often there
past ride : FTO gpx with lots of bling bling
Current ride: EVO 8 with the MOST CARBON IN AUSTRALIA....206KW AT ALL WHEELS
User avatar
Delvance
Veteran Mechanic
Posts: 1194
Joined: Wed Nov 15, 2006 6:00 pm
Location: Sydney South

Post by Delvance »

Another plug for ISMR at rockdale. Good shop, good prices and friendly service by the owners. A bit of my fto work was done there. The s/c'd rolla also gets taken care of down there now.

Yep, plenty of evo and gt-r eye candy down there. They love their high performance n/a's too.

Lol fto617, i went down there yesterday with my mps3 and Indy's like "wtf 8O " haha.
User avatar
fto617
Veteran Mechanic
Posts: 1069
Joined: Thu Apr 29, 2004 5:00 pm
Location: Sydney

Post by fto617 »

LOL....why get mps3 for!
sigh....that car is too soft for me IMO....
the DC5R can definitely rip that car to bits to be honest straight line and on the track
hmm...coming to think of it...my friends EK race civic just ripped my evos ass at wakefield doing a 1.06. My best is 1.08
dammit ><
past ride : FTO gpx with lots of bling bling
Current ride: EVO 8 with the MOST CARBON IN AUSTRALIA....206KW AT ALL WHEELS
User avatar
AJ
Oldtimer
Posts: 2991
Joined: Tue Nov 18, 2003 6:00 pm
Location: Sydney
Contact:

Post by AJ »

I need a good auto electrician, are these guys good for this too? Or can anyone recommend a good auto electrician please?
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Post by rock_it »

What is the problem that needs to be sorted ???

I know Ricol re-wired my whole car (put the EMS into the Sonata), went through all the wiring when my air con would shut on and off ... Took a while but they sorted it ... Done all the wiring + air con piping and work as e had to modify it all to fit around the add on's in the engine bay ... etc. etc.

Wired up many Cressida 1j-2j conversions and a whole lot more ...
User avatar
AJ
Oldtimer
Posts: 2991
Joined: Tue Nov 18, 2003 6:00 pm
Location: Sydney
Contact:

Post by AJ »

I’ve got a couple of small things that need doing.

1. Wire folding mirrors up to my alarm. I’ve got the instructions and relays needed.
2. Correctly wire up my oil pressure dial and air/fuel dial
3. My alarm is faulty. Keeps putting it’s self in silent mode. It’s a loose connection somewhere
4. Fit new window guide on drivers side (I know this isn’t an auto electricians job but depending on where I take it, maybe I can get it all done)
5. Fit Angel Eyes.
JOeJOe
Oldtimer
Posts: 1554
Joined: Wed Mar 29, 2006 6:00 pm

Post by JOeJOe »

Most important are the angel eyes.
Post Reply