WANTED DEAD OR ALIVE (AUTO ELEC)

Cruises, Meeting's and State Specific Information

Moderators: IMC, Club Staff

Post Reply
msbchi
Grease Monkey
Posts: 209
jedwabna poszewka promocja
Joined: Wed Nov 19, 2003 6:00 pm
Location: melb

WANTED DEAD OR ALIVE (AUTO ELEC)

Post by msbchi »

Does any-one know of a good auto electrician in the South-Eastern suburbs. Preferably one who can source those difficult to find regulators. My alternator seems to generating 11 volts instead of the required 13.5 volts so i want it looked at before I get a flat battery. I've disconnected the amp and stereo system to save power but will be installing a second amp/ head unit and subs once the power supply is back to normal. Any suggestions - anyone?
mxysxy
Oldtimer
Posts: 1905
Joined: Wed Aug 18, 2004 5:00 pm
Location: Melbourne
Contact:

Post by mxysxy »

Get it reconditioned,
any auto elec can do it

Take the alternator off yourself and save most of the bill
[img]http://www.smyrnaie.com/SeatCovers/FTO/ftobanner.jpg[/img]
msbchi
Grease Monkey
Posts: 209
Joined: Wed Nov 19, 2003 6:00 pm
Location: melb

Post by msbchi »

Yeah, I will be reconditioning the old one yet again. It has been done twice by S&L Motors (aka Lee) but I have ended up getting a new one because three reco's in as many years is a bit much. Probably keep the old one for back up. The new one only cost $450 so it's not much more than the recondition cost and should be more relialable
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

Thats a pretty good price for a new one. Mitsi Aus want $900 from me 8O
User avatar
AMACHA
Veteran Mechanic
Posts: 831
Joined: Thu Aug 02, 2007 5:00 pm
Location: Melbourne

Post by AMACHA »

$20.00 off the back of a mitsubishi truck :P
msbchi
Grease Monkey
Posts: 209
Joined: Wed Nov 19, 2003 6:00 pm
Location: melb

Post by msbchi »

Total cost inc labour was $600 but the alternator pumps out over 150 amps which I believe is more powerful than the original one I had and also meets all the specs for heat shielding etc so my amps are back up and running. Very happy with the end result
Post Reply