FTO AUSTRALIA

Righto... thought i'd create this thread for the best prices on random things for FTOs...
All you need to do is post up in this format:

PART:
PRICE:
WHERE:
OTHER:

Post it up and then every now and then i'll copy it into one post... and keep it organised...

Cut loose with your prices...

If theres already a better price from the same state, dont bother, but if you have a similair price from interstate, please let me know...

Suspension:
PART: Tein Aus Spec Super Street Coilovers
PRICE:$1943.70
WHERE: Fulcrum Suspension
OTHER:

PART: Tein Pillowball Adjustable Mounts
PRICE: $230 inc delivery from Japan (depending on exchange rate)
WHERE: www.perfectrun.com.au

High Performance:
PART: PWR Aluminium Radiator
PRICE:$760
WHERE:Predator Performanve (Slacks Creek QLD)
OTHER:

DRIVEN MOTORSPORTS
GOLD COAST
GOOD PRICES

PART:King Springs lowering springs
PRICE:$137/pair
WHERE:Supercheap auto
OTHER: This is a very good price as buying direct from king springs theyd be 200/pair
This price is for the low springs that'll drop the car 30mm each end.
I'm not sure if the lower ones would be the same price or not.

part numbers =
front kmfl-93
rear kcrl-46

That's a bloody good price on the King Springs ..Is that for Low's or Super Low's?

I can't beat the price unless I call back to check that its gone down, but ..

GSA Wholesale Suspension
Underwood
King Springs; $140 per pair (Front & Rear)
Price was for the SuperLows if I remember correctly..

I'll call & check the price..

that price is for lows.....dunno if the super lows would be the same or not.

knowhopetattoo wrote:that price is for lows.....dunno if the super lows would be the same or not.

I think they should be the same .. I'm just surprised that Supercheap is selling them for less than the price of GSA, even with the Trade discount..

RPW have the King Springs for even cheaper.. would be the place to get them if you're in WA .. otherwise with postage anywhere else it might work out the same.

My sister works at supercheap......so with employee discount I payed $209
I knew she'd come in handy one day....that's why I kept her

Im getting my exhaust done at Brisbane Exhaust center http://www.brisbane-exhaust.com.au/ and need to know is $800 a good price to pay for hurricane extractors
and $400 for the oval twin 3" tip xforce varex muffler?

alekazam wrote:Im getting my exhaust done at Brisbane Exhaust center http://www.brisbane-exhaust.com.au/ and need to know is $800 a good price to pay for hurricane extractors
and $400 for the oval twin 3" tip xforce varex muffler?

$800 fitted? Thats on the high side but not a rip off
$400 is really expensive for a muffler my Zetti one only cost me $180. Im pretty sure a few people have brought the xforce before then changed it soon after but dont quote me on that

no thats not fitted. do you know why people bin
the varex after thay fited it?

i love my varex... though its a little big.. well its actually a massive fcuk off thing....
i think he ment just regular varex mufflers.

As i say im not 100% I cant really remember.

$800 dollars w/o fitting is pretty steep. RPW sell there's (which we found out later are the hurricane ones) for $630.

I8A4RE wrote:As i say im not 100% I cant really remember.

$800 dollars w/o fitting is pretty steep. RPW sell there's (which we found out later are the hurricane ones) for $630.

They have them listed a bit cheaper on the web site.......I think the price is without GST, but its still only $534

3-1 Race Design Kit - 6A12 24v FTO
6A12 DOHC inc Mivec Extractor System Product Details...

$486.36

Did they drop there price on these or am I misunderstanding something?

I just got my low kings springs fro independant motor mart for a ripper price of
102 a set so 204 dollars for both fron and back. Once in a liftime price I think.

nvr2low wrote: I just got my low kings springs fro independant motor mart for a ripper price of
102 a set so 204 dollars for both fron and back. Once in a liftime price I think.

More details please e.g

Address, phone number

sorry guys yeah it is in darwin. So this might not be useful as you will have to add postage onto it.
Sorry
Cheers mitch

sorry guys yeah it is in darwin. So this might not be useful as you will have to add postage onto it.
Sorry
Cheers mitch

I8A4RE wrote:

alekazam wrote:Im getting my exhaust done at Brisbane Exhaust center http://www.brisbane-exhaust.com.au/ and need to know is $800 a good price to pay for hurricane extractors
and $400 for the oval twin 3" tip xforce varex muffler?

$800 fitted? Thats on the high side but not a rip off
$400 is really expensive for a muffler my Zetti one only cost me $180. Im pretty sure a few people have brought the xforce before then changed it soon after but dont quote me on that

i got an exforce cannon off ebay and its alright but sounds really airy at low revs like around upto around 2000

I went over to Muffler King in Toowoomba and received a quote for around $400 for a 2.5 inch cat-back exhaust. Mild steel, machine bent, Mercury muffler, resonator and the tip of my choice.

How's that sound?

Note: I know a stainless steel system with mandrel bends would give me more of a performance boost, but I feel this should be a bit of an upgrade over my standard system which they have told me has 2 holes.