Page 1 of 6
Crap cut from Bennoz conversion - ask questions here!
Posted: Wed Oct 01, 2008 11:58 pm
by nvr2low
hey man would you be able to source a flywheel from down south and use the money i sent u to buy me one buddy as i now their wont be a place with one up here buddy
Posted: Thu Oct 02, 2008 12:58 pm
by nvr2low
ok thanks man and after u have found out we can use the fto flywheel and clutch does that mean the slave cylinder doesn't have to be changed man
Posted: Fri Oct 03, 2008 11:45 pm
by xSlurpee
you have YOUR OWN thread for questions to ben mitchell
Posted: Sun Oct 12, 2008 4:14 pm
by Ferrus
Bennoz, Are you going to AWD your fto or convert to FWD?
Would the drivetrain from a Galant/legnum fit the FTO? I was thinking of doing an engine conversion and AWD and not sure which engine to use, either the 4g63 or 6a13tt.
Posted: Mon Oct 13, 2008 12:42 am
by xSlurpee
any idea is possible with money mate
Posted: Mon Oct 13, 2008 8:10 am
by FtoSam
I am in the process of starting the AWD conversion...
It is possible but there is quite a lot of fab work...
- Fuel Cell in boot
- Cut rear floorpan and weld in another one from a galant
- Weld up custom mounts
- Still dont know about the exhaust... going to be a hard one...
- Front cross members dunno about...
basically a lot of custom work
Posted: Mon Oct 13, 2008 6:06 pm
by SG
Can you use an evo fuel tank?
Posted: Mon Oct 13, 2008 9:35 pm
by FtoSam
Would need custom mounting as it would need to be moved to where the exhaust fits...
would probably cost about the same as a fuel cell and be 10x more of a pain in the ass
Posted: Tue Oct 14, 2008 3:20 am
by gr_fto_reborn
http://www.mitsiclub.co.uk/forum/viewto ... &start=225
You want to see this. evo 4 floor pan and engine and running gear welded into an fto with the roof cut off. The link should take you to the page with the EVO floor in!
Posted: Wed Oct 15, 2008 1:44 pm
by jonowong
did you template the wastegate mod for the others!
Posted: Wed Oct 15, 2008 3:26 pm
by nvr2low
yh bud you feel like making another 1 up for me man and I will pay for it please and some directions of what needs to be done man
Posted: Wed Oct 15, 2008 3:32 pm
by Bennoz
I'll blue print it a little later guys. At the moment my focus is getting the car back on the road as I have no wheels.
Posted: Wed Oct 15, 2008 7:00 pm
by nvr2low
yeah ok buddy no worrys how much longer did you make it man.
is it easier for the sparky to do the looms when the motor is in the car or before i drop the motor in man
Posted: Wed Oct 22, 2008 8:28 pm
by nvr2low
hey ben really need a hand how did you fit the 6a13tt wiring loom for the gearbox to ours man the speedo plug is diff on our fto gearbox and the 6a13tt plug won't fit man
Posted: Thu Oct 23, 2008 10:57 am
by I8A4RE
MITCHELL he is not in sydney, he is up here on the gold coast enjoying indy. He will reply to your msg's when he gets back you dont need to repeat the same msg 3 times.
Posted: Thu Oct 23, 2008 11:42 am
by nvr2low
f**k sorry I didn't see that I was sending it off my phone and it said failed so I kept refreshing it sorry guys
Posted: Mon Oct 27, 2008 4:56 pm
by Bennoz
Dunno yet mate... I've not worked on the car since the last update. Especially considering my mechanic was on the piss with us at Indy
Posted: Mon Oct 27, 2008 5:05 pm
by Tippin
was it any good? i heard they banned chicks from flashing off the top of balconies?
lol
Posted: Mon Oct 27, 2008 5:06 pm
by Bennoz
tippin9 wrote:was it any good? i heard they banned chicks from flashing off the top of balconies?
lol
I've got pics that say otherwise!
Posted: Mon Oct 27, 2008 5:09 pm
by aza013
ok its show and tell time Ben