i'm getting twins
Moderators: IMC, Club Staff
- alekazam
- Mechanic
- Posts: 561
- jedwabna poszewka promocja
- Joined: Sat Dec 01, 2007 6:00 pm
- Location: Melbourne
- Contact:
i'm getting twins
yes the same as dstocks except i'm using a single oval twin 3" tip xforce varex muffler thats going to go where the stock muffler fits. The tips are getting cut off and two 3'' stainless steel pipes welded on one going to the right hand side the other donuts around the back of the muffler and to the left. then thay split into twin stainless steel Blue Diamond tips that curve up slightly. shes going in this thursday and the hole job will cost
$870 thats $400 for the muffler $260 for the tips and $200 for labor. the cat I had already.
<a href="http://s50.photobucket.com/albums/f303/ ... 4474-1.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f303/ ... 4474-1.jpg" border="0" alt="Photobucket"></a>
$870 thats $400 for the muffler $260 for the tips and $200 for labor. the cat I had already.
<a href="http://s50.photobucket.com/albums/f303/ ... 4474-1.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f303/ ... 4474-1.jpg" border="0" alt="Photobucket"></a>
- alekazam
- Mechanic
- Posts: 561
- Joined: Sat Dec 01, 2007 6:00 pm
- Location: Melbourne
- Contact:
- J
- Oldtimer
- Posts: 2182
- Joined: Fri Apr 18, 2008 5:00 pm
- Location: Sydney West
- Contact:
LOL no i know thats the cat at the top... But ive seen some exaust with electronic silencers which uses a remote to send a signal to the exhaust to silence it... Not those big plug things
Last edited by J on Tue Feb 17, 2009 9:37 pm, edited 1 time in total.
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
That is going to look good!
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- alekazam
- Mechanic
- Posts: 561
- Joined: Sat Dec 01, 2007 6:00 pm
- Location: Melbourne
- Contact:
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Want an individual for long was I........
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- eddiii
- Veteran Mechanic
- Posts: 923
- Joined: Sun Dec 14, 2008 6:00 pm
- Location: sydney
- alekazam
- Mechanic
- Posts: 561
- Joined: Sat Dec 01, 2007 6:00 pm
- Location: Melbourne
- Contact:
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
That is one of the most craptacular mandrel bend fails you'll ever see...eddiii wrote:Just wondering is this item worth buying?
http://cgi.ebay.com.au/Mitsubishi-FTO-S ... 240%3A1318
Unless you plan on having that redone, I wouldn't touch it with a 10 foot pole.
- alekazam
- Mechanic
- Posts: 561
- Joined: Sat Dec 01, 2007 6:00 pm
- Location: Melbourne
- Contact:
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- alekazam
- Mechanic
- Posts: 561
- Joined: Sat Dec 01, 2007 6:00 pm
- Location: Melbourne
- Contact:
- nvr2low
- Oldtimer
- Posts: 1601
- Joined: Thu Apr 05, 2007 5:00 pm
Bennoz wrote:That is one of the most craptacular mandrel bend fails you'll ever see...eddiii wrote:Just wondering is this item worth buying?
http://cgi.ebay.com.au/Mitsubishi-FTO-S ... 240%3A1318
Unless you plan on having that redone, I wouldn't touch it with a 10 foot pole.
haha ben that looks like some of the stuff you would get done in darwin mate, some of the stuff is not good up here