Lambo door Conversion....YOU WANT IT? Now $950 for 10 buyers
Moderators: IMC, Club Staff
- nvr2low
- Oldtimer
- Posts: 1601
- jedwabna poszewka promocja
- Joined: Thu Apr 05, 2007 5:00 pm
sh*t that doesnt look so hard i will defently give it a go man. i am defently in for a kit i will be paying 1050 ok mate i am going bush for around 2 weeks so i should be getting abit of money for that then the tax comes back.
it will be a project while i take the car off the road again if i lose my lisence on the 1st july. IF i get the funds.
it will be a project while i take the car off the road again if i lose my lisence on the 1st july. IF i get the funds.
- Eltnot
- Mechanic
- Posts: 422
- Joined: Wed Nov 26, 2008 6:00 pm
- Location: Stafford, Brisbane, QLD
Ok, called Queensland Transport today. For this mod to be legal, you'll need an engineer's certificate or some such.
They gave me two names and phone numbers of engineers in Brisbane. I'm going to try and call them tomorrow to have a chat to them about what is needed and to go from there.
On the plus side of things, this may mean that one Engineer will be able to certify several kits and thus reduce the cost of doing them legally. At least that's what I hope.
I'll keep people posted on how I go.
They gave me two names and phone numbers of engineers in Brisbane. I'm going to try and call them tomorrow to have a chat to them about what is needed and to go from there.
On the plus side of things, this may mean that one Engineer will be able to certify several kits and thus reduce the cost of doing them legally. At least that's what I hope.
I'll keep people posted on how I go.
- Eltnot
- Mechanic
- Posts: 422
- Joined: Wed Nov 26, 2008 6:00 pm
- Location: Stafford, Brisbane, QLD
- fto13-marty
- Apprentice
- Posts: 71
- Joined: Sat May 30, 2009 5:00 pm
- Location: Burpengary
-
- Grease Monkey
- Posts: 279
- Joined: Thu Jun 24, 2004 5:00 pm
- Location: Queensland-Morayfield
sorry. been really busy lately and took me a while to get a hold of Darren.
Anyway hes not sure what can be done. he thinks he can maybe make up an approval letter approving the kit itself but hes not too sure.
He is trying to find out from QLD Transport what can be done and i'll let you guys know when he contacts me back.
Anyway hes not sure what can be done. he thinks he can maybe make up an approval letter approving the kit itself but hes not too sure.
He is trying to find out from QLD Transport what can be done and i'll let you guys know when he contacts me back.
Female Turner On-erer
-
- Grease Monkey
- Posts: 279
- Joined: Thu Jun 24, 2004 5:00 pm
- Location: Queensland-Morayfield
Well the guy hasn't got back to me so i rang QLD transport myself.
QLD transport says they are not illegal...if you have approval.
No mod plates are needed.
But they do need to meet engineering specifications.
The transport department has there own guys that will inspect the design.
I'll try to get the hinges on my car approved and that should cover it on all ftos as its the same kit on the same cars. or if not i can supply all the drawings needed for approval.
QLD transport says they are not illegal...if you have approval.
No mod plates are needed.
But they do need to meet engineering specifications.
The transport department has there own guys that will inspect the design.
I'll try to get the hinges on my car approved and that should cover it on all ftos as its the same kit on the same cars. or if not i can supply all the drawings needed for approval.
Female Turner On-erer
-
- Apprentice
- Posts: 42
- Joined: Sat Jul 25, 2009 5:00 pm
- Location: Castle Hill, 2154, NSW
- Contact:
- fto13-marty
- Apprentice
- Posts: 71
- Joined: Sat May 30, 2009 5:00 pm
- Location: Burpengary
- Shahrez
- Mechanic
- Posts: 433
- Joined: Sat Jun 16, 2007 5:00 pm
- Location: Perth, WA
- Contact:
- KatieFTO
- Grease Monkey
- Posts: 274
- Joined: Thu Mar 05, 2009 6:00 pm
- Location: Adelaide
- Contact: