project up and running again thanks to the warmer weather finally on its way.
So far ive just fitted a sard fpr and walbro fuel pump -
And my custom double alternator tensioner pulley to drive the supercharger is almost done and just needs the "v's" cut in -
and here's the extra idler pulley and bracket I made up to get more belt wrap around the custom alternator tensioner pulley to stop any belt slip -
Supercharger project starting
Moderators: IMC, Club Staff
- markj113
- Apprentice
- Posts: 59
- Joined: Thu Aug 02, 2007 5:00 pm
Re: Supercharger project starting
Custom pulley now complete and in the post coming from Ireland. Big thanks to Jason Poynton aka jayod12b from the Irish FTOoc
Now just have to bolt it on and start making up the supercharger mounting bracket and lining the pulleys up
Now just have to bolt it on and start making up the supercharger mounting bracket and lining the pulleys up
- Fto_Jason
- Grease Monkey
- Posts: 209
- Joined: Tue Oct 06, 2009 5:00 pm
- Location: Brissie
Re: Supercharger project starting
Omg man that looks SO good Looks like it is all coming together Good luck with the final touches.. Just curious, where in the world can i get a pod filter cover like that? it looks awesome!
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Supercharger project starting
Yeah i know, i think there is a similiar one at autobarn its a BMC kit.
Also mate have u taken measure ments with everything that your fabricated as im very interested in supercharging, as it looks a lot cheaper.
How much power does furniss's FTO make?
Also mate have u taken measure ments with everything that your fabricated as im very interested in supercharging, as it looks a lot cheaper.
How much power does furniss's FTO make?