Thinking of Buying a different car! need advice/ideas!

From Ferrari's to Fiats, it happens in here.

Moderators: IMC, Club Staff

User avatar
Shahrez
Mechanic
Posts: 433
jedwabna poszewka promocja
Joined: Sat Jun 16, 2007 5:00 pm
Location: Perth, WA
Contact:

Thinking of Buying a different car! need advice/ideas!

Post by Shahrez »

My FTO has been a loving companion for 5 years now and its starting to show signs of old age. Since i wont start full time work until a year or so, uni and other stuff makes spending on the car really tricky! so iam gonna be selling my fto soon.

The budget for my next car is 10 - 15k . that should be good enough to last me a few years and once i start full time work i'll see what happens. Will definately get an FTO again down the track and build it into a beast aka project car.

Now i was thinking for the mean time, maybe an Audi A4-A6? something nice, something different? what else do you guys rekon might be worth looking at?
User avatar
I8A4RE
QLD Coordinator
Posts: 9594
Joined: Mon Aug 28, 2006 5:00 pm
Location: BOOSTIN in front of you
Contact:

Post by I8A4RE »

Personally i wouldnt be buying a AUDI if your strapped for coin. Servicing and parts will rape your wallet and leave it dying in a ditch.

You should get a new model FTO :lol:
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

corrolla then you wont have to worry about it :roll:
FTO GR-TURBO
172KW ATW @ 11PSI
User avatar
alekazam
Mechanic
Posts: 561
Joined: Sat Dec 01, 2007 6:00 pm
Location: Melbourne
Contact:

Post by alekazam »

a4 definitly and do this to it :evil:
<a href="http://s50.photobucket.com/albums/f303/ ... i-A3-1.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f303/ ... i-A3-1.jpg" border="0" alt="Photobucket"></a>
User avatar
Supplanter
Forum Moderator
Posts: 6417
Joined: Tue Oct 22, 2002 5:00 pm
Location: Arizona Bay
Contact:

Post by Supplanter »

If you are strapped for cash and only working part time why buy a new car at all?
LED ALL the things.
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

This ^^ But if you must, think of the servicing costs of an Audi...$$$$$WTF$$$$$
User avatar
Cassf88
Mechanic
Posts: 731
Joined: Thu Dec 11, 2008 6:00 pm
Location: Melbourne

Post by Cassf88 »

you looking at purchasing a new or used car? thats the first real question....
User avatar
Shahrez
Mechanic
Posts: 433
Joined: Sat Jun 16, 2007 5:00 pm
Location: Perth, WA
Contact:

Post by Shahrez »

well iam not really strapped for cash in the manner that iam broke, but i dont want to spend heaps replacing and repairing things of the FTO. i rather use that money to buy something newer.

Simon - i was thinking of buying a newer FTO.lol

I want to by a used car offcoarse, new cars too pricey and i dont appreciate there 1st year depreciation. lol

So audi's would be expensive to service and maintain hey? is that only from genuine audi service/parts? how's audi realibility?
User avatar
I8A4RE
QLD Coordinator
Posts: 9594
Joined: Mon Aug 28, 2006 5:00 pm
Location: BOOSTIN in front of you
Contact:

Post by I8A4RE »

Pretty much anything euro is gonna cost a lot in servicing and repairs. A chic at my work owns a TT and her servicing is, wait for it.......... $1300, thats for just a run of the mill

Seriously if you want cheap ongoing cost you gotta buy something locally made, corolla, commonwhore, falcon.
User avatar
Delvance
Veteran Mechanic
Posts: 1194
Joined: Wed Nov 15, 2006 6:00 pm
Location: Sydney South

Post by Delvance »

Get an old corolla with a 4age or 4agze conversion with engineers cert. Will be able to pick up a decent one for 7-8k or less, awesome fun and cheap as chips for service and parts...hell it's DIY for a lot of it if you want. Always a few on carsales.
User avatar
zuihoujueding
Oldtimer
Posts: 1980
Joined: Thu Aug 31, 2006 5:00 pm
Location: Sydney

Post by zuihoujueding »

Delvance wrote:Get an old corolla with a 4age or 4agze conversion with engineers cert. Will be able to pick up a decent one for 7-8k or less, awesome fun and cheap as chips for service and parts...hell it's DIY for a lot of it if you want. Always a few on carsales.
SECOND TO THAT!!!!
User avatar
koolio1234
Oldtimer
Posts: 2574
Joined: Sat Oct 04, 2008 5:00 pm
Location: Western Sydney
Contact:

Post by koolio1234 »

zuihoujueding wrote:
Delvance wrote:Get an old corolla with a 4age or 4agze conversion with engineers cert. Will be able to pick up a decent one for 7-8k or less, awesome fun and cheap as chips for service and parts...hell it's DIY for a lot of it if you want. Always a few on carsales.
SECOND TO THAT!!!!
Not the best idea ^^ turboed cars are generally more expensive ot maintain especially one that needed an engineers cert, cos of non-standard parts used.


If you want reliability and practicality and economy I would recommend going for a 1995 car onwards with low kilometres. A make like a toyota, mitsubishi, honda, etc. Avoid turbos, rotaries and v8's if you want something that wont cost a fortune to buy and run.
[img]http://i710.photobucket.com/albums/ww104/thekrevolution/FTOFINALSIGNATUREcopy.png[/img]
User avatar
Shahrez
Mechanic
Posts: 433
Joined: Sat Jun 16, 2007 5:00 pm
Location: Perth, WA
Contact:

Post by Shahrez »

hmmm good points there overall.

as long as the milage is below 120,000km then that would be perfectly fine. thinking about non-turbo supra maybe? i dont street race or hoon or anything, so for the next few years anything which looks good, runs well, does its job, is perfectly fine for me. after that........EVOOOOOO. lol
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

Shahrez wrote:hmmm good points there overall.

as long as the milage is below 120,000km then that would be perfectly fine. thinking about non-turbo supra maybe? i dont street race or hoon or anything, so for the next few years anything which looks good, runs well, does its job, is perfectly fine for me. after that........EVOOOOOO. lol
stick with the fto over the na supra mate its better in almost every aspect
FTO GR-TURBO
172KW ATW @ 11PSI
User avatar
I8A4RE
QLD Coordinator
Posts: 9594
Joined: Mon Aug 28, 2006 5:00 pm
Location: BOOSTIN in front of you
Contact:

Post by I8A4RE »

vipfto wrote:
Shahrez wrote:hmmm good points there overall.

as long as the milage is below 120,000km then that would be perfectly fine. thinking about non-turbo supra maybe? i dont street race or hoon or anything, so for the next few years anything which looks good, runs well, does its job, is perfectly fine for me. after that........EVOOOOOO. lol
stick with the fto over the na supra mate its better in almost every aspect
Totally agree, non turbo supra's are big fat whales of cars to drive, you will be dissapointed and really the costs are going to be similar to a fto. You will not be saving anything, it will cost you more to change over unless you find someone that will swap. But in saying that i bet all n/a supra owners will want to swap :lol:
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

My sister has a non turbo Supra & yes it is a fat tub. Wouldn't pull a greased stick outta a dogs arse. She prefers my car :)
User avatar
Delvance
Veteran Mechanic
Posts: 1194
Joined: Wed Nov 15, 2006 6:00 pm
Location: Sydney South

Post by Delvance »

koolio1234 wrote:
zuihoujueding wrote:
Delvance wrote:Get an old corolla with a 4age or 4agze conversion with engineers cert. Will be able to pick up a decent one for 7-8k or less, awesome fun and cheap as chips for service and parts...hell it's DIY for a lot of it if you want. Always a few on carsales.
SECOND TO THAT!!!!
Not the best idea ^^ turboed cars are generally more expensive ot maintain especially one that needed an engineers cert, cos of non-standard parts used.


If you want reliability and practicality and economy I would recommend going for a 1995 car onwards with low kilometres. A make like a toyota, mitsubishi, honda, etc. Avoid turbos, rotaries and v8's if you want something that wont cost a fortune to buy and run.
wtf

Firstly, a 4age is an n/a engine, much like the 6a12. And if the engine's been swapped with a black or silver top 4age, the motor will be quite low km's and not that old.

As for the 4agze, it's supercharged and as a factory setup, tough as nails. Service really is the same as an FTO.

As for the engineers cert, that's needed because the engine has been swapped into another corolla chassis. You can argue, with swaps, a lot of the times the engines get rebuilt and new mounts installed...

:roll:
User avatar
Shahrez
Mechanic
Posts: 433
Joined: Sat Jun 16, 2007 5:00 pm
Location: Perth, WA
Contact:

Post by Shahrez »

lol yeah test drove a mint quality NA supra yesterday, fto is waaaaaaaaaay better. even though i was getting a bargain for it.

what do you rekon of the aristo's? checked one out today, 72,000kms, full leather interior, fully optioned, bbs mags, aftermarket suspension, 2JZTE twin turbo engine, no engine mods at all. just lowered and exhaust. for $18,000. obviously i can get that lowered.
User avatar
koolio1234
Oldtimer
Posts: 2574
Joined: Sat Oct 04, 2008 5:00 pm
Location: Western Sydney
Contact:

Post by koolio1234 »

Delvance wrote:
koolio1234 wrote:
zuihoujueding wrote:
Delvance wrote:Get an old corolla with a 4age or 4agze conversion with engineers cert. Will be able to pick up a decent one for 7-8k or less, awesome fun and cheap as chips for service and parts...hell it's DIY for a lot of it if you want. Always a few on carsales.
SECOND TO THAT!!!!
Not the best idea ^^ turboed cars are generally more expensive ot maintain especially one that needed an engineers cert, cos of non-standard parts used.


If you want reliability and practicality and economy I would recommend going for a 1995 car onwards with low kilometres. A make like a toyota, mitsubishi, honda, etc. Avoid turbos, rotaries and v8's if you want something that wont cost a fortune to buy and run.
wtf

Firstly, a 4age is an n/a engine, much like the 6a12. And if the engine's been swapped with a black or silver top 4age, the motor will be quite low km's and not that old.

As for the 4agze, it's supercharged and as a factory setup, tough as nails. Service really is the same as an FTO.

As for the engineers cert, that's needed because the engine has been swapped into another corolla chassis. You can argue, with swaps, a lot of the times the engines get rebuilt and new mounts installed...

:roll:
I wasnt referring to the 4age, was talking about the 4agze. Swapping it into a rolla will require an engineer cert, any time you out a engine inside a specific chassis that didnt come stock with that engine, you have to be take measures: spend money on making things fit, upgrading the drivetrain, etc.

The 4age came standard in plenty of corollas, so that should be a fairly easy swap.


I dont understand why you would suggest a corolla with a 4agze swap to someone who needs something cheap to maintain, reliable and economical. As far as i know, everyone i know who owns one will saw otherwise.
[img]http://i710.photobucket.com/albums/ww104/thekrevolution/FTOFINALSIGNATUREcopy.png[/img]
User avatar
yano
Mechanic
Posts: 721
Joined: Sun Dec 16, 2007 6:00 pm

Post by yano »

koolio1234 wrote:
Delvance wrote:
koolio1234 wrote:
zuihoujueding wrote:
Delvance wrote:Get an old corolla with a 4age or 4agze conversion with engineers cert. Will be able to pick up a decent one for 7-8k or less, awesome fun and cheap as chips for service and parts...hell it's DIY for a lot of it if you want. Always a few on carsales.
SECOND TO THAT!!!!
Not the best idea ^^ turboed cars are generally more expensive ot maintain especially one that needed an engineers cert, cos of non-standard parts used.


If you want reliability and practicality and economy I would recommend going for a 1995 car onwards with low kilometres. A make like a toyota, mitsubishi, honda, etc. Avoid turbos, rotaries and v8's if you want something that wont cost a fortune to buy and run.
wtf

Firstly, a 4age is an n/a engine, much like the 6a12. And if the engine's been swapped with a black or silver top 4age, the motor will be quite low km's and not that old.

As for the 4agze, it's supercharged and as a factory setup, tough as nails. Service really is the same as an FTO.

As for the engineers cert, that's needed because the engine has been swapped into another corolla chassis. You can argue, with swaps, a lot of the times the engines get rebuilt and new mounts installed...

:roll:
I wasnt referring to the 4age, was talking about the 4agze. Swapping it into a rolla will require an engineer cert, any time you out a engine inside a specific chassis that didnt come stock with that engine, you have to be take measures: spend money on making things fit, upgrading the drivetrain, etc.

The 4age came standard in plenty of corollas, so that should be a fairly easy swap.


I dont understand why you would suggest a corolla with a 4agze swap to someone who needs something cheap to maintain, reliable and economical. As far as i know, everyone i know who owns one will saw otherwise.
I know heaps of cars rolling around without engine cert's for crazy engine swaps. It's an issue when it comes to selling the car only really. A rolla with the 4age 20v or with the 4agze does fit the criteria though. Definitly cheap to maintain, leave the pulley standard and they'll be reliable as anything and they're 1.6l's so they're economical too.

Aristo's are a massive car, nice cruiser but heavy as fk.. For that price range, consider a gen 5 prelude or a series 2 s14 & leave it stock
Post Reply