Dstocks and I was talking about that yesterday, he has some good ideas to compensate for diferent setupscrazyeyedgoat wrote:hey looks tight.
id be done with that
would it fit with the big fat cannon exhaust that some ftos come stock with?
Rear Bar Design
Moderators: IMC, Club Staff
- aza013
- NSW Coordinator
- Posts: 9087
- jedwabna poszewka promocja
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Rear Bar Design
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Re: Rear Bar Design
Bennoz wrote:No FTO's come stock with dopey cannon fog horns Its a ricer thingcrazyeyedgoat wrote:would it fit with the big fat cannon exhaust that some ftos come stock with?
@crazy, they all came with twins bro.
Taz wrote:When funds allow
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Rear Bar Design
Ill be trying to cater for as many exhaust types as I can.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- Tippin
- Oldtimer
- Posts: 1663
- Joined: Wed Feb 27, 2008 6:00 pm
- Location: Sydney
Re: Rear Bar Design
i wont have that problem, i dont have an exhaust tip setup
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Rear Bar Design
OK, as for number plate lights, im now leaning towards something like these:
http://cgi.ebay.com.au/2x-White-LED-Mot ... 5d2a2c129d
Thoughts.....
http://cgi.ebay.com.au/2x-White-LED-Mot ... 5d2a2c129d
Thoughts.....
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- crazyeyedgoat
- Apprentice
- Posts: 73
- Joined: Tue Sep 01, 2009 5:00 pm
- Location: Townsville QLD
Re: Rear Bar Design
no no its more just a fat tip.
and it is the stock one.
it aint like those big ugly cannons you see every lancer drivin round with
and it is the stock one.
it aint like those big ugly cannons you see every lancer drivin round with
- crazyeyedgoat
- Apprentice
- Posts: 73
- Joined: Tue Sep 01, 2009 5:00 pm
- Location: Townsville QLD
Re: Rear Bar Design
oh and i think the those lights would look sweet
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Rear Bar Design
^
This......
Nice find Dwayne..
This......
Nice find Dwayne..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
- aza013
- NSW Coordinator
- Posts: 9087
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Rear Bar Design
Agree ^^^^
you have found the winning lights
you have found the winning lights
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Rear Bar Design
And now some progress pics...
The first two are pictures relating to extending the sides. Bought myself a plastic welder and im pretty happy with the job it does:
OK, the next couple have skipped a couple of steps. Both sides are pretty much complete bar final sanding. Have also finished the shape of the bit around the lower back. Have built it in about 1cm for the insert. Have also done the cutout for the top
OK and the final pic. Have started on the insert for the top. At this stage its quite rough, but a bit of work and itll come up nicely. Have done some flat fibreglass bits for starting the bit where the numberplate is as well.
All in all, coming along nicely I think. Made some good progress this weekend.
The first two are pictures relating to extending the sides. Bought myself a plastic welder and im pretty happy with the job it does:
OK, the next couple have skipped a couple of steps. Both sides are pretty much complete bar final sanding. Have also finished the shape of the bit around the lower back. Have built it in about 1cm for the insert. Have also done the cutout for the top
OK and the final pic. Have started on the insert for the top. At this stage its quite rough, but a bit of work and itll come up nicely. Have done some flat fibreglass bits for starting the bit where the numberplate is as well.
All in all, coming along nicely I think. Made some good progress this weekend.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- aza013
- NSW Coordinator
- Posts: 9087
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Rear Bar Design
Looking great
A lot of work there.
A lot of work there.
- Tippin
- Oldtimer
- Posts: 1663
- Joined: Wed Feb 27, 2008 6:00 pm
- Location: Sydney
Re: Rear Bar Design
thats looking great mate
keep up the good work
keep up the good work
- crazyeyedgoat
- Apprentice
- Posts: 73
- Joined: Tue Sep 01, 2009 5:00 pm
- Location: Townsville QLD
Re: Rear Bar Design
niiiiiice
im lovin it!
im lovin it!
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Re: Rear Bar Design
f**k dude looks sweet as, keep up the work. While saying that, don't over work yourself on this man.
Taz wrote:When funds allow
- xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Re: Rear Bar Design
looks great Dwayne!!
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Rear Bar Design
That is awesome.. Top job...
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Rear Bar Design
+1 ^
Schmick.
Schmick.
- I8A4RE
- QLD Coordinator
- Posts: 9594
- Joined: Mon Aug 28, 2006 5:00 pm
- Location: BOOSTIN in front of you
- Contact:
Re: Rear Bar Design
^^ + 2
CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...
- Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
Re: Rear Bar Design
That looks absolutely brilliant.
Great job
Great job
- FTO_GPvR
- Mechanic
- Posts: 578
- Joined: Fri Jan 16, 2009 6:00 pm
- Location: Sydney
Re: Rear Bar Design
Thats looking great mate
Awesome job Dwayne, Keep it up
Awesome job Dwayne, Keep it up