So you want a hairdryer on your FTO? Or do you already have a hairdryer in it? This is the section for it. All other big power projects & forced induction goes here too.
the oil filter comes off by pulling it up???
wouldnt that spill oil n sh*t everywhere??
(yes i know the oils in the sump, the oils drained etc etc but it cant be 100% empty right?)
I measured the mushroom and you're right, it's 150mm across. Should I use the link above?
BTW, mechanic is coming to do the filter, belt and oil leak tomorrow then it'll be back to the dyno on Thursday and pick it up on Friday, if Herman hasn't blown it up!
I measured the mushroom and you're right, it's 150mm across. Should I use the link above?
BTW, mechanic is coming to do the filter, belt and oil leak tomorrow then it'll be back to the dyno on Thursday and pick it up on Friday, if Herman hasn't blown it up!
100% yes.
I bought the 200mm replacement back in june for mine.
seems big when you get it but once you press it up into the mesh it fits like a glove.
Bennoz wrote:Intercooler could be bigger & a better setup.
I've never been a fan of those dual entry on the one side units, better flow from entry one side, exit the other.
Yes they have better flow end to end. However, there are two important aspects your not considering. Firstly, unless you have a engine that has had its intake plenium reversed eg. Jeffsfto. then you are going to have more pipe work which in most situations will have more bends. Secondly the same side units have better cooling as instead of the air travelling in a pipe to the other side of the car, it is travelling in the actual intercooler. I read a article a few years ago about it. I'll try and track it down
CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...
That belt is missing a rib supposed to be a 6 rib.
And yeah, that fuels a bit how ya going Best way to open the filter up is just to hack saw it in half.
Bring it to Dwaynes & I'll do it for ya, add it to the fuel filter wall of shame
Envy do have an injector cleaner machine down there. Does require the intake manifold to come off thou, if they've got the time.
If they do, don't forget to get them to do the 7th injector
the oil filter comes off by pulling it up???
wouldnt that spill oil n sh*t everywhere??
(yes i know the oils in the sump, the oils drained etc etc but it cant be 100% empty right?)
This happens on some models of harley... and yes you spill oil everywhere. There's probably some trick to it
Btw i just read both of the threads and id like to say congradulations AJ on a fantastic buy (*cough* u son of a bitch *cough*)
and i cant wait for you to fix it up so we can have HLBA day and DIY day.
Happy Laps with Ben and AJ... just imagine, a whole day of boosted fun
