Hey Guys..
I've been looking for coilovers to purchase I'm specifically looking for some coilovers that have BOTH front and rear adjustable camber. The coilovers BC offers seem to only have front adjustable camber. Would anyone be able to point me in the right direction of where i can find some that have adjustable camber both front and rear?
Cheers..
Question about Camber and Coilovers...
Moderators: IMC, Club Staff
- El_Ade
- Grease Monkey
- Posts: 163
- jedwabna poszewka promocja
- Joined: Sun Nov 01, 2009 5:00 pm
- Location: Brizzy
- Contact:
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Question about Camber and Coilovers...
you can adjust camber on ftos on the rear anyway. its not needed.
- El_Ade
- Grease Monkey
- Posts: 163
- Joined: Sun Nov 01, 2009 5:00 pm
- Location: Brizzy
- Contact:
Re: Question about Camber and Coilovers...
Right, my pologies for not picking that up.
So I'd be able to reflect the front camber from my coilovers to the rear quite easily?
So I'd be able to reflect the front camber from my coilovers to the rear quite easily?
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Question about Camber and Coilovers...
umm well depends how much camber u want to have on the front, im not sure on the limits of the camber adjustment on the back but ive heard people running -2. -1 is standard on the fto on the rear.
- El_Ade
- Grease Monkey
- Posts: 163
- Joined: Sun Nov 01, 2009 5:00 pm
- Location: Brizzy
- Contact:
Re: Question about Camber and Coilovers...
I'd probably running something close to -2. When you say you have heard of people running it. So it's tecnicially possible
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Question about Camber and Coilovers...
-2 is a lot of camber dude, why u want to run that much. Ive just seen it quoted on the forums and such.
- El_Ade
- Grease Monkey
- Posts: 163
- Joined: Sun Nov 01, 2009 5:00 pm
- Location: Brizzy
- Contact:
Re: Question about Camber and Coilovers...
JDM inspired Project track car, without getting into much detail..
I'll have a look round some other forums, I'm sure someone has done it before.
I'll have a look round some other forums, I'm sure someone has done it before.
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
Re: Question about Camber and Coilovers...
I was running -3 front and -2 rear but have recently put back to -2 front, basically had very little difference in tyre wear but did make car more twitchy and unstable under braking and nasty straight uneven roads. even now its not that stable on the straights but managable but on the twistys its pure heaven
FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI