Blended DCuatro Sideskirts
Moderators: IMC, Club Staff
- dstocks
- National Vice President
- Posts: 9529
- jedwabna poszewka promocja
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Blended DCuatro Sideskirts
Finally, finished one side of my 3 part DCuatro sideskirts (these have taken a LOT of work - still have to do the other side):
Doing this so that I can plan to have the top bits moulded into the panels (and still be able to remove the sideskirt of required!). Thought id get them fitting properly first as im not sure when ill take the final leap and blend them (itll take a while to afford the paintwork)
Doing this so that I can plan to have the top bits moulded into the panels (and still be able to remove the sideskirt of required!). Thought id get them fitting properly first as im not sure when ill take the final leap and blend them (itll take a while to afford the paintwork)
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Re: Blended DCuatro Sideskirts
Looks great dwayne can't wait to see the final outcome
Taz wrote:When funds allow
- bduffman
- Oldtimer
- Posts: 1450
- Joined: Sun Jan 31, 2010 6:00 pm
- Location: gosford
- Contact:
Re: Blended DCuatro Sideskirts
wish we had the copys made off them
shouldnt cost to much to blend the paint
hope you plan on making it to autosalon this year
shouldnt cost to much to blend the paint
hope you plan on making it to autosalon this year
- sublime19
- Sooty!
- Posts: 5036
- Joined: Sun Feb 12, 2006 6:00 pm
- Location: Sydney
Re: Blended DCuatro Sideskirts
By separating the bottom part of the sideskirt, won't it slightly defeat the purpose of getting it blended, since you'll still be able to see the line where it's separated, just like on a non-blended kit
I have to work - People on the dole depend on me.
Bennoz wrote:Meet Subby. The class leader & originator of post whoring... Although most of Subbys posts have 'content'
Bennoz wrote:They especially hate bonnets, they frisbee across the road & behead a pedestrian.
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Blended DCuatro Sideskirts
Ahhhhh, but ill be able to get the guard off the car if I need to. Will also be able to remove the sideskirt if I need to. Imagine what would happen if you managed to damage the bottom of the skirt or damage the front guard....... You would wreck the car getting it off. Besides, the line will match up with the bottom of the door, so wont really be noticible.By separating the bottom part of the sideskirt, won't it slightly defeat the purpose of getting it blended, since you'll still be able to see the line where it's separated, just like on a non-blended kit
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- bduffman
- Oldtimer
- Posts: 1450
- Joined: Sun Jan 31, 2010 6:00 pm
- Location: gosford
- Contact:
Re: Blended DCuatro Sideskirts
The part line will also be a lot less noticeable as the join line has been matched pretty well
Also dosent have different hights or angles making the part line just a few mill gap
Will look nice when its done
Also just adds one more custom thing about the car
Also dosent have different hights or angles making the part line just a few mill gap
Will look nice when its done
Also just adds one more custom thing about the car
- sublime19
- Sooty!
- Posts: 5036
- Joined: Sun Feb 12, 2006 6:00 pm
- Location: Sydney
Re: Blended DCuatro Sideskirts
Fair enough
Won't look as nice though, but this is the closest anybody will come while being sensible and blending it all!
Won't look as nice though, but this is the closest anybody will come while being sensible and blending it all!
I have to work - People on the dole depend on me.
Bennoz wrote:Meet Subby. The class leader & originator of post whoring... Although most of Subbys posts have 'content'
Bennoz wrote:They especially hate bonnets, they frisbee across the road & behead a pedestrian.
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Blended DCuatro Sideskirts
On a black car u wouldn't notice the join..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Re: Blended DCuatro Sideskirts
rock_it wrote:On a black car you wouldn't notice the join..
Taz wrote:When funds allow
- Tippin
- Oldtimer
- Posts: 1663
- Joined: Wed Feb 27, 2008 6:00 pm
- Location: Sydney
Re: Blended DCuatro Sideskirts
hey, any progress on this?
are you just going to be glueing this on or screwing it on as well?
the blending will crack if its just glued on?
are you just going to be glueing this on or screwing it on as well?
the blending will crack if its just glued on?
- aza013
- NSW Coordinator
- Posts: 9087
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Blended DCuatro Sideskirts
I was talking to Dstocks about this the other day.
The car is going to paint very soon if not now
Skirts and bar are getting done, so pics will be up after that is all done.
But better still come to the bonfire weekend and see it first hand .
The car is going to paint very soon if not now
Skirts and bar are getting done, so pics will be up after that is all done.
But better still come to the bonfire weekend and see it first hand .