Pre-facelift T's Factory
Moderators: IMC, Club Staff
- xj265
- Mechanic
- Posts: 778
- jedwabna poszewka promocja
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Pre-facelift T's Factory
I managed to get hold of Mel's old damaged 'custom' bumper which she got from DMD and repaired it
Here's what the bumper used to look:
http://ftoaustralia.com/v3/viewtopic.php?f=2&t=19208
This is what it looks like atm:
(Headlights are pretty dull atm and bonnet is not aligned properly either )
I fixed up the cracks and also blended the DC lip in and filled in the mitsi logo, unfortunately doesn't quite fit right on the drivers side, so will have to work out something there but overall pretty happy with it
must add a big thanks to tippin and dstocks
Here's what the bumper used to look:
http://ftoaustralia.com/v3/viewtopic.php?f=2&t=19208
This is what it looks like atm:
(Headlights are pretty dull atm and bonnet is not aligned properly either )
I fixed up the cracks and also blended the DC lip in and filled in the mitsi logo, unfortunately doesn't quite fit right on the drivers side, so will have to work out something there but overall pretty happy with it
must add a big thanks to tippin and dstocks
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Pre-facelift T's Factory
Love it. My favourite aftermarket bar of all time.
- xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Re: Pre-facelift T's Factory
Have to agree!
cheers Ben
cheers Ben
- Tippin
- Oldtimer
- Posts: 1663
- Joined: Wed Feb 27, 2008 6:00 pm
- Location: Sydney
Re: Pre-facelift T's Factory
top job, looks great
hmm i wonder why the left side wont align properly? because the bar is orginally stock. Did u get the stud through that yellow hole thats next to the headlight?
hmm i wonder why the left side wont align properly? because the bar is orginally stock. Did u get the stud through that yellow hole thats next to the headlight?
- xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Re: Pre-facelift T's Factory
It didn't want to line up properly but it did eventually. However the bumper was still out by about half a cm or so...
Not to sure how that can be fixed?
Not to sure how that can be fixed?
- Tippin
- Oldtimer
- Posts: 1663
- Joined: Wed Feb 27, 2008 6:00 pm
- Location: Sydney
Re: Pre-facelift T's Factory
only thing i can think of is that the reo might not be bolted on dead in the middle.
- Connor_1994
- Mechanic
- Posts: 686
- Joined: Thu Jan 20, 2011 3:00 pm
- Location: caloundra, sunshine coast
Re: Pre-facelift T's Factory
hey, do you guys know where i could get a Ts factory or bozz front bumper, im looking all over the internet but cant seem tofind one,
any help would be great, thanks
any help would be great, thanks
- xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Re: Pre-facelift T's Factory
I don't think there is anywhere here in Aus for pre facelift versions but there is Dwayne's facelift T's factory
The DC lip is still available here in Aus though, through UAS or just jap I believe:
http://www.justjap.com/store/product.ph ... at=&page=1
The DC lip is still available here in Aus though, through UAS or just jap I believe:
http://www.justjap.com/store/product.ph ... at=&page=1
- aza013
- NSW Coordinator
- Posts: 9087
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
Re: Pre-facelift T's Factory
$300 just for the DC lip I would rather pay another $200 and get the full bar from Dstocks .xj265 wrote:I don't think there is anywhere here in Aus for pre facelift versions but there is Dwayne's facelift T's factory
The DC lip is still available here in Aus though, through UAS or just jap I believe:
http://www.justjap.com/store/product.ph ... at=&page=1
- xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Re: Pre-facelift T's Factory
yeah it is but cheaper than UAS
- xj265
- Mechanic
- Posts: 778
- Joined: Tue Oct 28, 2008 5:00 pm
- Location: Sunnie Coast
Re: Pre-facelift T's Factory
Test fitted again today, manage to fit a lot better this time:
I realised what I done wrong now lol The bumper came with some brackets so I used them but of course they didn't fit with my FTO
Sits about 12cm of the ground, so still legal not so practical...
I realised what I done wrong now lol The bumper came with some brackets so I used them but of course they didn't fit with my FTO
Sits about 12cm of the ground, so still legal not so practical...
- Kustom
- Oldtimer
- Posts: 6144
- Joined: Sun Oct 04, 2009 5:00 pm
- Location: Brisbane
Pre-facelift T's Factory
f**k Yeah man that bar is so sexy! And 12cm is heaps, mines like 7
Taz wrote:When funds allow
- I8A4RE
- QLD Coordinator
- Posts: 9594
- Joined: Mon Aug 28, 2006 5:00 pm
- Location: BOOSTIN in front of you
- Contact:
Re: Pre-facelift T's Factory
Looks very good man. Job well done.
CHRISTIANITY: The belief that a cosmic Jewish Zombie who was his own father can make you live forever if you symbolically eat his flesh and telepathically tell him you accept him as your master, so he can remove an evil force from your soul that is present in humanity because a rib-woman was convinced by a talking snake to eat from a magical tree...
- Gholdwayne
- Oldtimer
- Posts: 2657
- Joined: Mon Dec 22, 2008 6:00 pm
- Location: The edge of Woodcroft. Edgewood!
- Contact:
Re: Pre-facelift T's Factory
Very nice! I think that sideskirt would look great if the line on top of the vent hole was blended to the fender, or at least made to appear blended
The height of the front bar matches with the sideskirts very well!
The height of the front bar matches with the sideskirts very well!
97 GPX Icelle Blue
I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!
FTO[For The Orgasm]
like For The Win!, but more hardcore...
I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!
FTO[For The Orgasm]
like For The Win!, but more hardcore...
- its_the_driver
- Apprentice
- Posts: 37
- Joined: Thu Oct 06, 2011 3:50 pm
- Location: MELB-Hi I'm Matt.
- Contact:
Re: Pre-facelift T's Factory
That looks so awesome!
'94 JZZ31 Toyota Soarer - Daily
'97 DE3A Mitsubishi FTO - Project Car
'97 DE3A Mitsubishi FTO - Project Car