I'm fitting a 6 point battery kill swtich.
and 1 of the connection's goes to kill the ignition coils.
But what do i do for the ignition coils as the car has 3 output's A, B, & C. Do I cut them all or just 1 of them?
Help fitting Master Battery Switch
Moderators: IMC, Club Staff
- d_dan
- Grease Monkey
- Posts: 282
- jedwabna poszewka promocja
- Joined: Tue Apr 22, 2008 5:00 pm
- Location: Ireland
- Shane001
- Oldtimer
- Posts: 2730
- Joined: Tue Jul 21, 2009 5:00 pm
- Location: Sydney
- Contact:
Re: Help fitting Master Battery Switch
Hold the fort, if you can give me a couple of days I'll dig out the wiring diagram, won't be till mid week though as too busy, so if you can wait...
- d_dan
- Grease Monkey
- Posts: 282
- Joined: Tue Apr 22, 2008 5:00 pm
- Location: Ireland
Re: Help fitting Master Battery Switch
No problem. thanks a million
- d_dan
- Grease Monkey
- Posts: 282
- Joined: Tue Apr 22, 2008 5:00 pm
- Location: Ireland
- Shane001
- Oldtimer
- Posts: 2730
- Joined: Tue Jul 21, 2009 5:00 pm
- Location: Sydney
- Contact:
Re: Help fitting Master Battery Switch
haha, sorry mate, just realised I forgot about this, has been a chaotic week.
I'll put them up for you today, just have to dig out my notes.
Cheers.
I'll put them up for you today, just have to dig out my notes.
Cheers.
- Shane001
- Oldtimer
- Posts: 2730
- Joined: Tue Jul 21, 2009 5:00 pm
- Location: Sydney
- Contact:
Re: Help fitting Master Battery Switch
Hi mate, I figured I'd post this as a DIY for everyone to easily find, see link;
viewtopic.php?f=10&t=24663
So essentially you don't touch your ECU wiring, this wires into your ignition switch. Other than rewiring your battery and starter motor to go through this switch, you only actually cut 1 wire, the ignition switch wire number 3. See link for full instructions
viewtopic.php?f=10&t=24663
So essentially you don't touch your ECU wiring, this wires into your ignition switch. Other than rewiring your battery and starter motor to go through this switch, you only actually cut 1 wire, the ignition switch wire number 3. See link for full instructions
Last edited by Shane001 on Fri Nov 04, 2011 10:06 pm, edited 1 time in total.
- d_dan
- Grease Monkey
- Posts: 282
- Joined: Tue Apr 22, 2008 5:00 pm
- Location: Ireland
Re: Help fitting Master Battery Switch
cheers man