PHIL069's 95 FTO GPX

A place for members to show off their pride & joys.

Moderators: IMC, Club Staff

Post Reply
User avatar
vanadinite
Veteran Mechanic
Posts: 809
jedwabna poszewka promocja
Joined: Fri Apr 26, 2013 2:13 am
Location: Brisbane

Re: PHIL069's 95 FTO GPX

Post by vanadinite »

PHIL069 wrote:Thanks Vegemite :D
Could you please edit your post and remove all the pics from your quote of me, 2 many pics to have twice over.
Thanks :D
But it looks so good.......
Top
User avatar
PHIL069
Oldtimer
Posts: 4719
Joined: Sun Sep 20, 2009 5:00 pm
Location: Central Coast > South Australia

Re: PHIL069's 95 FTO GPX

Post by PHIL069 »

Found my clutch slave cylinder was leaking fluid from it's seal. The rubber boot was holding all the fluid under pressure, when I touched the boot the fluid came flying out like a water pistol.
Bought a new slave today, fitted it and bled the system.
The new slave had to come from Adelaide, same day, on a bus :lol:
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
Top
User avatar
PHIL069
Oldtimer
Posts: 4719
Joined: Sun Sep 20, 2009 5:00 pm
Location: Central Coast > South Australia

Re: PHIL069's 95 FTO GPX

Post by PHIL069 »

Today I designed, built and installed a custom ally pod air box.
It took me all day and into the night, bloody mossies :roll:
I did measure and design, but I had to modify everything I made as I went too.
I still have to line the box, probably with some insersion rubber matting that I have in the shed.
I also still have to sand the edges of the top a bit moar
Don't know if I will paint it red or leave it silver yet?

Pics...
DSC_4375_zps028b188e.jpg
DSC_4376_zps261763d3.jpg
DSC_4377_zps46bbef83.jpg
DSC_4379_zps4412d286.jpg
DSC_4382_zps4ba2b25c.jpg
DSC_4383_zps0a35fdad.jpg
DSC_4384_zps0103a6ce.jpg
DSC_4386_zps2c32c231.jpg
DSC_4389_zpsc7317186.jpg
DSC_4390_zpsf5918445.jpg
DSC_4391_zps71492ade.jpg
DSC_4393_zpsd0b057a0.jpg
DSC_4398_zpsd4fb02a1.jpg
DSC_4400_zpsa08c5d7c.jpg
DSC_4396_zpsf8889b78.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by PHIL069 on Sun Feb 11, 2018 3:14 pm, edited 1 time in total.
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
Top
User avatar
Technikhaus
Oldtimer
Posts: 3656
Joined: Wed Dec 28, 2011 4:45 pm
Location: Dunedin - NZ
Contact:
Contact Technikhaus

Re: PHIL069's 95 FTO GPX

Post by Technikhaus »

Nice job!
I'm not sure on the painting... Looks nice in silver, and it may be too much red?
Man '96 FTO GPX
Man '89 Legacy RS Rally car
Man '90 MR2 GT
Auto '08 Fairmont Ghia
Top
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:
Contact Bennoz

Re: PHIL069's 95 FTO GPX

Post by Bennoz »

Great job!
Top
User avatar
bjk
Totes
Posts: 5746
Joined: Tue Oct 04, 2011 1:34 pm
Location: Adelaide

Re: PHIL069's 95 FTO GPX

Post by bjk »

Sweet. Carbon wrap it?

Make me one? :lol:
POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
Image Image Image Image
Top
picka
Apprentice
Posts: 68
Joined: Thu Jul 25, 2013 12:48 pm

Re: PHIL069's 95 FTO GPX

Post by picka »

bjk wrote:Sweet. Carbon wrap it?

Make me one? :lol:
looks awesome!! good job

make me one too!!
Top
User avatar
destinationtoby
Broke it
Posts: 3503
Joined: Sat Nov 24, 2012 11:05 pm
Location: mid north coast

Re: PHIL069's 95 FTO GPX

Post by destinationtoby »

And me
Cheers :)
Because nothing is faster than a p plater in a commodore.....
except maybe a p plater on a unicorn
FTOcrazy273 wrote: Destinationtoby probably has one of THE best FTO's on the forum I never get tired of looking at his pics! Good work mate!
Top
User avatar
c3rbera
Mechanic
Posts: 649
Joined: Fri Mar 15, 2013 10:46 pm
Location: Adelaide

Re: PHIL069's 95 FTO GPX

Post by c3rbera »

Add me to the list, that is so good!! :)
silverGPX wrote:Nice supra
Manual '95 GPX
Top
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:
Contact ObsidianRadio

Re: PHIL069's 95 FTO GPX

Post by ObsidianRadio »

sh*t, that went up quick 8O

Wanna make me one sometime? :lol:
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
Top
silverGPX
9.5"
Posts: 6793
Joined: Tue Oct 13, 2009 5:00 pm

Re: PHIL069's 95 FTO GPX

Post by silverGPX »

he put up the dimensions to make your own lol
Top
User avatar
ObsidianRadio
Oldtimer
Posts: 2050
Joined: Sat Jan 21, 2012 4:08 am
Location: Adelaide, SA
Contact:
Contact ObsidianRadio

Re: PHIL069's 95 FTO GPX

Post by ObsidianRadio »

silverGPX wrote:he put up the dimensions to make your own lol
My metalworking experience is terrible and I lack the tools :P
Jack

Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
http://www.facebook.com/SlowLifeAU
Top
User avatar
dstocks
National Vice President
Posts: 9529
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:
Contact dstocks

Re: PHIL069's 95 FTO GPX

Post by dstocks »

Hey Phil, you though of insulating the inside of that to reduce the ambient heat a little. Good job BTW.
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    Top
    User avatar
    bjk
    Totes
    Posts: 5746
    Joined: Tue Oct 04, 2011 1:34 pm
    Location: Adelaide

    Re: PHIL069's 95 FTO GPX

    Post by bjk »

    dstocks wrote:Hey Phil, you though of insulating the inside of that to reduce the ambient heat a little. Good job BTW.
    PHIL069 wrote:I still have to line the box, probably with some insersion rubber matting that I have in the shed.
    For your convenience. :lol:
    POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
    Image Image Image Image
    Top
    User avatar
    dstocks
    National Vice President
    Posts: 9529
    Joined: Fri Jun 24, 2005 5:00 pm
    Location: Utopia
    Contact:
    Contact dstocks

    Re: PHIL069's 95 FTO GPX

    Post by dstocks »

    :oops: :lol: my bad
    Complete FTO (http://www.completefto.com.au/completefto.asp)
      Image
      If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
      Top
      User avatar
      PHIL069
      Oldtimer
      Posts: 4719
      Joined: Sun Sep 20, 2009 5:00 pm
      Location: Central Coast > South Australia

      Re: PHIL069's 95 FTO GPX

      Post by PHIL069 »

      Great job there, can you make me one also.....Oh wait :oops:
      bjk wrote:Make me one? :lol:
      No
      picka wrote:make me one too!!
      No
      destinationtoby wrote:And me
      No
      c3rbera wrote:Add me to the list
      No
      ObsidianRadio wrote:Wanna make me one sometime?
      Ok :lol:
      ObsidianRadio wrote:sh*t, that went up quick 8O
      No point mucking around, I had the supplies so I made it :D
      dstocks wrote:Hey Phil, you though of insulating the inside of that to reduce the ambient heat a little. Good job BTW.
      Thanks Dwayne :lol:
      silverGPX wrote:he put up the dimensions to make your own lol
      Those dimensions are just my first estimates, I had to do quite a bit of modding to get it to fit ;) + I didn't post up all the other pieces dimensions + The lid was designed with a bit of paper folded up to the shape/size, on the car, then I traced around the paper.


      BTW...Thanks for all the great comments, I'm so chuffed :P
      Actually I feel that I need to have another go at making the top, it's just not perfect enough :roll: I would like to make the top out of a bit thicker metal.
      It will do for now, at least it covers up my pod....less chance of a defect.
      mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
      Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
      Top
      User avatar
      ObsidianRadio
      Oldtimer
      Posts: 2050
      Joined: Sat Jan 21, 2012 4:08 am
      Location: Adelaide, SA
      Contact:
      Contact ObsidianRadio

      Re: PHIL069's 95 FTO GPX

      Post by ObsidianRadio »

      PHIL069 wrote:
      ObsidianRadio wrote:Wanna make me one sometime?
      Ok :lol:
      I like this guy :lol:
      Jack

      Livin' the Slow Life. 1997 GP Version-R | 1995 GS/GR Version-SparkleFairy
      http://www.facebook.com/SlowLifeAU
      Top
      User avatar
      PHIL069
      Oldtimer
      Posts: 4719
      Joined: Sun Sep 20, 2009 5:00 pm
      Location: Central Coast > South Australia

      Re: PHIL069's 95 FTO GPX

      Post by PHIL069 »

      Moar work done to my engine bay today :D
      I thought I would try something I have thinking about for a long time now.
      I purchased an A4 sheet of chrome vinyl from eBay, photocopied my engine cover, cut out the letters from the copies, taped them to the vinyl, cut them out and stuck them to my engine cover.

      and.....vwooola, chrome lettering 8)

      Pics...
      DSC_4403_zps7d7dafe5.jpg
      DSC_4402_zpsb274ecd5.jpg
      DSC_4409_zpsfa527cee.jpg
      DSC_4411_zpsa1168e98.jpg
      DSC_4413_zps5ebf386c.jpg
      DSC_4415_zpse2ebc143.jpg
      DSC_4422_zps929fb60d.jpg
      DSC_4407_zps1430e418.jpg
      DSC_4418_zps3185c59a.jpg
      DSC_4428_zps338d5632.jpg
      DSC_4431_zpsfdb63a04.jpg
      DSC_4438_zpsb237269f.jpg
      DSC_4439_zpsa9efba92.jpg
      DSC_4442_zps752a5abc.jpg
      DSC_4454_zps6f7f1f34.jpg
      You do not have the required permissions to view the files attached to this post.
      Last edited by PHIL069 on Sun Feb 11, 2018 3:19 pm, edited 1 time in total.
      mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
      Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
      Top
      User avatar
      bjk
      Totes
      Posts: 5746
      Joined: Tue Oct 04, 2011 1:34 pm
      Location: Adelaide

      Re: PHIL069's 95 FTO GPX

      Post by bjk »

      Wicked. Love the contrast/opposites with the cover and the slam panel!
      POWERED BY #TIMKNOTTMOTORSPORT: 2013-2016
      Image Image Image Image
      Top
      User avatar
      FTOwnage
      Mechanic
      Posts: 648
      Joined: Tue Oct 09, 2012 11:15 am
      Location: Newcastle

      Re: PHIL069's 95 FTO GPX

      Post by FTOwnage »

      Now chrome plate the manifold and paint the lettering red! :D
      FTO GPvR 6A13 Single Turbo (Almost finished....)
      Top
      Post Reply

      Return to “Members Rides”