6a12 fto turbo kit for sale!!
Moderators: IMC, Club Staff
- fto-007
- Grease Monkey
- Posts: 378
- jedwabna poszewka promocja
- Joined: Tue Mar 02, 2010 6:00 pm
6a12 fto turbo kit for sale!!
Hi all up for sale is my turbo kit off my fto. Im sell the kit as i am upgrading to a larger turbo setup and no longer need this kit, to complete the turbo conversion you will need to buy and install intercooler and plumbing, piggy back or stand alone ecu, turbo oil feed and return lines, relocate battery to boot, relocate o2 sensor. Other than that it should be good to go! This turbo kit produced around 170kw at the wheels @ 12 psi bleeding off to 10 psi. The kit comes with evo injectors 560cc, fpr, rpw headers has nuts welded in for egt tuning, rpw y pipe modified to suit the turbo up pipe (2.5 inch), dump pipe with wastegate divider (2.5 inch), aem air filter with carbon fiber air box, kkr 330 turbo with turbo blanket (same bolt up as a garrett gt2860rs). My loss is your gain im selling all this for $2900 plus postage
- Attachments
-
- 2012-05-04 11.06.40 (800x600).jpg (374.97 KiB) Viewed 1049 times
-
- 2012-05-04 11.07.15 (800x600).jpg (407.52 KiB) Viewed 1049 times
-
- 2012-05-04 11.07.31 (800x600).jpg (332.15 KiB) Viewed 1049 times
-
- 2012-05-04 11.07.42 (800x600).jpg (388.95 KiB) Viewed 1049 times
-
- 2012-05-04 11.07.48 (800x600).jpg (378.08 KiB) Viewed 1049 times
-
- 2012-05-04 11.08.03 (800x600).jpg (413.2 KiB) Viewed 1049 times
-
- 2012-05-04 11.08.20 (800x600).jpg (377.94 KiB) Viewed 1049 times
-
- 2012-05-04 11.08.34 (800x600).jpg (401.46 KiB) Viewed 1049 times
-
- 2012-05-04 11.08.44 (800x600).jpg (398.61 KiB) Viewed 1049 times
-
- 2012-05-04 11.09.27 (800x600).jpg (361.51 KiB) Viewed 1049 times
Last edited by fto-007 on Wed Jan 02, 2013 10:37 pm, edited 2 times in total.
- fto-007
- Grease Monkey
- Posts: 378
- Joined: Tue Mar 02, 2010 6:00 pm
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: mivec fto turbo kit!!
You have set this up originally, I assume. Do you know approx how much $ the above list would cost.fto-007 wrote:need to buy and install intercooler and plumbing, piggy back or stand alone ecu, turbo oil feed and return lines, relocate battery to boot, relocate o2 sensor.
Would the purchaser also have to rebuild/strenghten their upper engine ie: pistons, rings, valves, valve springs etc.
Would you be suppyling instructions for installation or help?
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
- fto-007
- Grease Monkey
- Posts: 378
- Joined: Tue Mar 02, 2010 6:00 pm
Re: mivec fto turbo kit!!
Its all a bolt on application i designed and made it at home, a local mechanic would be able to install it as its all bolted on. As for building the engine a stock engine can handle up to 6 psi maybe a little more with the right tuner. Yes i have had the setup on my car for about a year you can have a look at it on members rides i have a write up on it and some more pic To buy new injectors + fpr $700, up and down pipes $ 1700, carbon fiber air box + filter $350, turbo + blanket $500, flanges ect $300.....so just off the top of my head would be around $3500
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: mivec fto turbo kit!!
Sorry, I meant the cost of intercooler and plumbing, piggy back or stand alone ecu, turbo oil feed and return lines
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
- fto-007
- Grease Monkey
- Posts: 378
- Joined: Tue Mar 02, 2010 6:00 pm
Re: mivec fto turbo kit!!
Just depends how cheap you want to do it. You could do it as cheap as $1000 for everything
-
- Apprentice
- Posts: 32
- Joined: Fri Dec 02, 2011 4:03 pm
- Location: woodstock qld australia
Re: 6a12 fto turbo kit for sale!!
so how much more grunt would i get with this on a 6a13tt legnum if i was to go single turbo instead of my twin set up in my fto i think the headers are the same, do you still have ?
ps allready run 18 psi @220+kwts
ps allready run 18 psi @220+kwts
- fto-007
- Grease Monkey
- Posts: 378
- Joined: Tue Mar 02, 2010 6:00 pm
Re: 6a12 fto turbo kit for sale!!
hey yes i still have the kit you are restricted by the turbo...a garrett gt2876r will bolt straight up, from memory they can produce around 260kw atw so i guess its just how much power your going for.
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: 6a12 fto turbo kit for sale!!
Where did you get that carbon box from?
Good luck with sale
Good luck with sale
- fto-007
- Grease Monkey
- Posts: 378
- Joined: Tue Mar 02, 2010 6:00 pm
Re: 6a12 fto turbo kit for sale!!
Hi i made the carbon fiber air box myself a lot of work with carbon fiber work took around 15 hours to make
- Lawso
- Penis Fingers
- Posts: 2458
- Joined: Sat Apr 05, 2008 5:00 pm
- Location: Canberra
- Contact:
Re: 6a12 fto turbo kit for sale!!
so effing tempting!!!!!!!!!
wish i had money
wish i had money
- fto-007
- Grease Monkey
- Posts: 378
- Joined: Tue Mar 02, 2010 6:00 pm
Re: 6a12 fto turbo kit for sale!!
it cost me around $9000 to turbo mine that was with me making and designing everything
- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: 6a12 fto turbo kit for sale!!
No man! Dont do it! Its too dangerous!lawso wrote:so effing tempting!!!!!!!!!
wish i had money
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
- Vectose
- Forum Moderator
- Posts: 3947
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: 6a12 fto turbo kit for sale!!
Yeah, you might drive over a speed bump and end up on your roof.Daniel2019 wrote:No man! Dont do it! Its too dangerous!lawso wrote:so effing tempting!!!!!!!!!
wish i had money
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: 6a12 fto turbo kit for sale!!
Or someone elsesVectose wrote:Yeah, you might drive over a speed bump and end up on your roof.Daniel2019 wrote:No man! Dont do it! Its too dangerous!lawso wrote:so effing tempting!!!!!!!!!
wish i had money
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: 6a12 fto turbo kit for sale!!
hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm......
- Daniel2019
- Oldtimer
- Posts: 7957
- Joined: Thu Jan 12, 2012 12:25 pm
- Location: Sydney!
- Contact:
Re: 6a12 fto turbo kit for sale!!
For the safety of everyone, can someone please buy this before lawso does..
I fix cars.
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
- Sahin
- HULK
- Posts: 5518
- Joined: Wed Oct 05, 2011 10:38 pm
- Location: Up to me nuts in boys guts
6a12 fto turbo kit for sale!!
Do it Matt!
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: 6a12 fto turbo kit for sale!!
Will all of the piping clear the ABS unit?
- fto-007
- Grease Monkey
- Posts: 378
- Joined: Tue Mar 02, 2010 6:00 pm
Re: 6a12 fto turbo kit for sale!!
yep clears all the ABS unit