SIZE: 17 X 7.0
OFFSET: +42
P.C.D.: 5 X 114.3
CENTERBORE: 73
EDIT: tyre size I would be looking at is either 215,45,17
Or 215,40,17 or if I could fit wider like 225 I would
Cheers again
no issue but 225 is too wide for rim
Another offset question
Moderators: IMC, Club Staff
-
ZFL45H1
- Oldtimer
- Posts: 1830
- jedwabna poszewka promocja
- Joined: Sun Feb 07, 2010 6:00 pm
- Location: Albury
Another offset question
Did a search guys but can't find an answer and I can only use my tapatalk but will these fit if I got guards rolled and I'm not sure about center bore if that is the correct size or not cheers
SIZE: 17 X 7.0
OFFSET: +42
P.C.D.: 5 X 114.3
CENTERBORE: 73
EDIT: tyre size I would be looking at is either 215,45,17
Or 215,40,17 or if I could fit wider like 225 I would
Cheers again
no issue but 225 is too wide for rim
SIZE: 17 X 7.0
OFFSET: +42
P.C.D.: 5 X 114.3
CENTERBORE: 73
EDIT: tyre size I would be looking at is either 215,45,17
Or 215,40,17 or if I could fit wider like 225 I would
Cheers again
no issue but 225 is too wide for rim
gotta get there one day :)
-
Andym
- Grease Monkey
- Posts: 165
- Joined: Wed Mar 21, 2012 6:48 pm
Re: Another offset question
you would have no problem with the guards running that offset and width rim, especially if you got them rolled.
my wheels are +35 x 8.25 which essentially would poke out 22mm more than the wheels you're suggesting.
i run a 215/45/R17 and have no problem with the guards which aren't rolled. though i assume yours is going to be as low as possible
my wheels are +35 x 8.25 which essentially would poke out 22mm more than the wheels you're suggesting.
i run a 215/45/R17 and have no problem with the guards which aren't rolled. though i assume yours is going to be as low as possible