Thanks for the help.Forged internals
Moderators: IMC, Club Staff
-
ftonoob
- Grease Monkey
- Posts: 101
- jedwabna poszewka promocja
- Joined: Mon Nov 05, 2012 9:37 pm
Forged internals
Hey guys. How do I go about establishing specs for a forged piston and rod setup for the 6a13tt? Is it basically the same as stock rods and pistons or are forged internals completely different from the oem internals (dimensions wise)? Thanks for the help.
Thanks for the help.-
spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: Forged internals
What dimensions are you talking about?
The rods are likely to be thicker.
The piston dome design may be different depending on compression.
The piston skirts etc also sometimes differ depending on brand and so on.
From what I can tell the 6A13TT internals are good for nearly 300kw at the wheels (need to confirm this) which is really more than any FWD would need
The rods are likely to be thicker.
The piston dome design may be different depending on compression.
The piston skirts etc also sometimes differ depending on brand and so on.
From what I can tell the 6A13TT internals are good for nearly 300kw at the wheels (need to confirm this) which is really more than any FWD would need