Should have taken the racecar mate, would have fit nice on the back of that truckDaniel2019 wrote:Was a free upgrade from the Ute
Basically "would you like some extra turbo with that?"
Would have done you a good deal
Moderators: IMC, Club Staff
Should have taken the racecar mate, would have fit nice on the back of that truckDaniel2019 wrote:Was a free upgrade from the Ute
Basically "would you like some extra turbo with that?"
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
Astron_Boy wrote: Over combensation is a bitch.
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
Shane001 wrote:Tein coilovers sold
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
I have 1!!!!!!!!!!!!!!!!!Sahin wrote:I have 2 starters!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
That's it, he is not going to post in this thread anymore...you scared him away!Daniel2019 wrote:
P.S. Where's my free stuff!
Daniel2019 wrote:Sahin wrote:Also contributed to the 300zx racing fund
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
No worries Daniel, can always use another set of handsDaniel2019 wrote:When its up and running and you need a guy to hand you tools then I'd love to pit crew
Bennoz wrote:I got Bali beli & sharted on my phone. But it was fun
bjk wrote:you old people are no help at all.
I'm just going to be a pain and ask because I can't be bothered going through all the comments, do you still have the front sway bar?Shane001 wrote:Misc parts and spares from the racecar. Most parts are pickup only but will post smaller/lighter items priced $50 or higher.
Pickup from Dundas Valley, Sydney. Please pm any offers or requests for postage.
Spare 6A12 Mivec Engine inc Intake Plenum & Throttle Body - $300. SOLD.
Note: This engine has a leak in one exhaust valve in cylinder 3.
Diagnosed via a leak down test on the engine. I also had a look with a borescope but couldn't see anything out of the ordinary so may be a hairline crack either in the valve or the valve seat. May only be a bit of carbon build up on the seat preventing the valve from seating properly. Will likely need the head to come off to diagnose fully and resolve though. Otherwise this engine is strong.
Note the spare head listed below is the same bank (cylinders 1/3/5).
Tein Type HA Shocks, springs and camber adjustable strut tops - $500. SOLD
GPX front brake calipers - $200. SOLD
GPX 4pin Alternator - $100. SOLD
GPX starter motor - $100. SOLD
Set of CDH275 275cc Injectors - $100.
New side track exhaust - no muffler - $100.
GPX Steering Rack complete - $100.
Radiator with electric fan - $100. SOLD
Coilpacks and Leads - Full Set - $50.
GPX left and right complete front hub assemblies - $50.
Crank Angle Sensor x3 - $50 each.
Cam Angle Sensor x3 - $50 each.
Brake Boosters x2 - $50 each.
Pair GPX Front Control Arms - $50.
New upper and lower radiator hoses - $50.
GPX Fuel Pump inc holder & fuel guage sender assembly - $50.
Power Steering Pump - $50.
GPX MAP Sensor - $50.
Factory Knock Sensor - $50.
GPX Steering Column - $50.
GPX Fuel Tank - $50.
GPX side skirts – silver - $50.
6A12 Mivec Head - Rear Bank - $50. SOLD.
Set of CHD166 166cc Injectors (GPX factory standard) - $50.
GPX Rear Wing - $30.
Spare TRW Front Brake Rotors (used but still good) - $30.
GPX Front Sway Bar 16mm x2 - $30 each.
GPX Rear Sway Bar 18mm - $30.
GPvR Front Right Control Arm - $20.
GPX Brake Master Cylinder 15/16 x2 - $20 each.
SuperFlex GPX Polyurethane Front Sway Bar Bushes SPF1700/16K – New - $20. SOLD
Accelerator Cable - $20.
Engine Sump - $20. SOLD
New Steering Rack Boots left & right - $20. SOLD
New Ball Joint - Camskill M330016 - $20.
Front drivers seat rail - $20.
GPX Front Reo - $20.
6A12 Mivec Intake Plenum - no throttle body - $20. SOLD
New Outer CV Boot x4 inc grease & clamps - $10 each. SOLD
New Inner CV Boot x1 inc grease & clamps - $10. SOLD
Plus lots of other smaller & misc parts.
I've missed PahnPahn wrote:I'm just going to be a pain and ask because I can't be bothered going through all the comments, do you still have the front sway bar?Shane001 wrote:Misc parts and spares from the racecar. Most parts are pickup only but will post smaller/lighter items priced $50 or higher.
Pickup from Dundas Valley, Sydney. Please pm any offers or requests for postage.
Spare 6A12 Mivec Engine inc Intake Plenum & Throttle Body - $300. SOLD.
Note: This engine has a leak in one exhaust valve in cylinder 3.
Diagnosed via a leak down test on the engine. I also had a look with a borescope but couldn't see anything out of the ordinary so may be a hairline crack either in the valve or the valve seat. May only be a bit of carbon build up on the seat preventing the valve from seating properly. Will likely need the head to come off to diagnose fully and resolve though. Otherwise this engine is strong.
Note the spare head listed below is the same bank (cylinders 1/3/5).
Tein Type HA Shocks, springs and camber adjustable strut tops - $500. SOLD
GPX front brake calipers - $200. SOLD
GPX 4pin Alternator - $100. SOLD
GPX starter motor - $100. SOLD
Set of CDH275 275cc Injectors - $100.
New side track exhaust - no muffler - $100.
GPX Steering Rack complete - $100.
Radiator with electric fan - $100. SOLD
Coilpacks and Leads - Full Set - $50.
GPX left and right complete front hub assemblies - $50.
Crank Angle Sensor x3 - $50 each.
Cam Angle Sensor x3 - $50 each.
Brake Boosters x2 - $50 each.
Pair GPX Front Control Arms - $50.
New upper and lower radiator hoses - $50.
GPX Fuel Pump inc holder & fuel guage sender assembly - $50.
Power Steering Pump - $50.
GPX MAP Sensor - $50.
Factory Knock Sensor - $50.
GPX Steering Column - $50.
GPX Fuel Tank - $50.
GPX side skirts – silver - $50.
6A12 Mivec Head - Rear Bank - $50. SOLD.
Set of CHD166 166cc Injectors (GPX factory standard) - $50.
GPX Rear Wing - $30.
Spare TRW Front Brake Rotors (used but still good) - $30.
GPX Front Sway Bar 16mm x2 - $30 each.
GPX Rear Sway Bar 18mm - $30.
GPvR Front Right Control Arm - $20.
GPX Brake Master Cylinder 15/16 x2 - $20 each.
SuperFlex GPX Polyurethane Front Sway Bar Bushes SPF1700/16K – New - $20. SOLD
Accelerator Cable - $20.
Engine Sump - $20. SOLD
New Steering Rack Boots left & right - $20. SOLD
New Ball Joint - Camskill M330016 - $20.
Front drivers seat rail - $20.
GPX Front Reo - $20.
6A12 Mivec Intake Plenum - no throttle body - $20. SOLD
New Outer CV Boot x4 inc grease & clamps - $10 each. SOLD
New Inner CV Boot x1 inc grease & clamps - $10. SOLD
Plus lots of other smaller & misc parts.
Yes, 2 of, pickup only though sorry.Pahn wrote:I'm just going to be a pain and ask because I can't be bothered going through all the comments, do you still have the front sway bar?
I could collect and bring it up the the Hunter in 2 weeks time.Shane001 wrote:Yes, 2 of, pickup only though sorry.Pahn wrote:I'm just going to be a pain and ask because I can't be bothered going through all the comments, do you still have the front sway bar?