Newbie to FTO and this forum..
Moderators: IMC, Club Staff
-
- Newbie
- Posts: 5
- jedwabna poszewka promocja
- Joined: Thu Aug 15, 2013 4:52 am
Newbie to FTO and this forum..
Hello all, my name is rooster (nic)
I have recently acquired a '98 FTO GPX that needs some lovin...
My lovely wife bought it for my upcoming b'day.
It's fairly straight with a few dodgy repairs which I plan to strip right back and start fresh.
My issue is while the car itself was quite cheap $1000.... The engine drives ok but I think it was driven like it was stolen for a long time, seems to have a knock in bottom end, losing coolant (but no puddles) and while there is no evidence on the dipstick there is a little bit of brown sludge on 710 cap (lol little blonde joke sorry)
I am researching alternatives to either rebuild/repair existing mivec and try to boost it, Or go for a conversion to something like a 6a13tt...
Any suggestions will be fantastic.
Thanking everyone in advance for any help
Rooster.
I have recently acquired a '98 FTO GPX that needs some lovin...
My lovely wife bought it for my upcoming b'day.
It's fairly straight with a few dodgy repairs which I plan to strip right back and start fresh.
My issue is while the car itself was quite cheap $1000.... The engine drives ok but I think it was driven like it was stolen for a long time, seems to have a knock in bottom end, losing coolant (but no puddles) and while there is no evidence on the dipstick there is a little bit of brown sludge on 710 cap (lol little blonde joke sorry)
I am researching alternatives to either rebuild/repair existing mivec and try to boost it, Or go for a conversion to something like a 6a13tt...
Any suggestions will be fantastic.
Thanking everyone in advance for any help
Rooster.
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Newbie to FTO and this forum..
Hey mate,
Having done the 6A13 conversion, here's my advice.
A place you can get a low km engine for about $600 bucks:
http://ichiban.com.au/
And here's a place you can read the how-to on the 6A13 conversion for about 10 grand: lol
viewtopic.php?f=22&t=15644
Having done the 6A13 conversion, here's my advice.
A place you can get a low km engine for about $600 bucks:
http://ichiban.com.au/
And here's a place you can read the how-to on the 6A13 conversion for about 10 grand: lol
viewtopic.php?f=22&t=15644
-
- Newbie
- Posts: 5
- Joined: Thu Aug 15, 2013 4:52 am
Re: Newbie to FTO and this forum..
Hey man, thanks for the quick reply... Appreciate it...
If I was to still try and shoehorn an 6a13tt in to her, is there any issues I need to address with the auto that is still in it???
Just like the sound of 2.5L twin
If I was to still try and shoehorn an 6a13tt in to her, is there any issues I need to address with the auto that is still in it???
Just like the sound of 2.5L twin
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Newbie to FTO and this forum..
Of all the guys around that have done it with the auto box, they've ended up putting a manual in after lots of frigging around with the auto.
The torque converters just aren't up to it. And having said that, the manuals aren't really either. I have to rebuild my box annually!
The torque converters just aren't up to it. And having said that, the manuals aren't really either. I have to rebuild my box annually!
-
- Newbie
- Posts: 5
- Joined: Thu Aug 15, 2013 4:52 am
Re: Newbie to FTO and this forum..
Far out, you must be an expert by now rippin it out annually...
But yeah, food for thought... Can't wait to sink my teeth into it, but at the same time will go slow and steady.
Wife and I own a kids playland... And she wants to modify the front and rear bars to look like Lightning McQueen... I think I need to find a damn good fiberglasser
But yeah, food for thought... Can't wait to sink my teeth into it, but at the same time will go slow and steady.
Wife and I own a kids playland... And she wants to modify the front and rear bars to look like Lightning McQueen... I think I need to find a damn good fiberglasser
- Sahin
- HULK
- Posts: 5518
- Joined: Wed Oct 05, 2011 10:38 pm
- Location: Up to me nuts in boys guts
Re: Newbie to FTO and this forum..
oh hey chr15Roostersfto wrote:Far out, you must be an expert by now rippin it out annually...
But yeah, food for thought... Can't wait to sink my teeth into it, but at the same time will go slow and steady.
Wife and I own a kids playland... And she wants to modify the front and rear bars to look like Lightning McQueen... I think I need to find a damn good fiberglasser
- kiz
- SA Coordinator
- Posts: 2178
- Joined: Wed Nov 09, 2011 10:09 pm
- Location: Adelaide, South Australia
Re: Newbie to FTO and this forum..
Hey,
WTTC,
And Ben's the man to talk to about the 6A13TT as you can see, and about how to efficiently wear through a gearbox and replace it annually
WTTC,
And Ben's the man to talk to about the 6A13TT as you can see, and about how to efficiently wear through a gearbox and replace it annually
There are two types of people on forums; those that give helpful advice, and the others
1998 Mitsubishi FTO GPVR AERO
1998 Mitsubishi FTO GPVR AERO
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
Re: Newbie to FTO and this forum..
http://www.fto-ireland.com/forum/viewto ... =1&t=13359Wife and I own a kids playland... And she wants to modify the front and rear bars to look like Lightning McQueen... I think I need to find a damn good fiberglasser
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: Newbie to FTO and this forum..
Dayum! That's a lot of bodywork. Bet that cost a mint.
Looks pretty convincing till you see those freakishly beady eyes, haha.
Looks pretty convincing till you see those freakishly beady eyes, haha.
-
- Newbie
- Posts: 5
- Joined: Thu Aug 15, 2013 4:52 am
Re: Newbie to FTO and this forum..
Omg, that is awesome... they have got to a lot of effort there...
i think i will not show this to the missus lol, she thinks it is just a simple "just change bumper" job O.o
Thanks heaps for posting the pics
i think i will not show this to the missus lol, she thinks it is just a simple "just change bumper" job O.o
Thanks heaps for posting the pics
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: Newbie to FTO and this forum..
They already have one in Brisbane and they get no business.Roostersfto wrote:Omg, that is awesome... they have got to a lot of effort there...
i think i will not show this to the missus lol, she thinks it is just a simple "just change bumper" job O.o
Thanks heaps for posting the pics
-
- Newbie
- Posts: 5
- Joined: Thu Aug 15, 2013 4:52 am
Re: Newbie to FTO and this forum..
Yeah.. Mine won't be anywhere near as good as that but it's for the kids... Like I was saying that my wife and I own a playland... Just having something like that parked out the front of the shop will be pretty cool... Kids will try and yank mums arm off to go look and hopefully then go inside to play on our equipment...