Tein NAs
Moderators: IMC, Club Staff
- Bennoz
- National President
- Posts: 23668
- jedwabna poszewka promocja
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Tein NAs
Guys, just removed these from my car.
They are Tein NA series direct replacement shocks & springs. 16 point damper adjustable, height adjustable, with pillow mounts on the front. Quite rare on an FTO.
These are pretty ragged out - I would not recommend putting them in a car without a full rebuild by Fulcrum in QLD. I had the fronts rebuilt about 7 or 8 years ago & it cost me almost $700 because one of the shafts was bent. They've been in my car for almost 10 years & have seen countless track days.
So, unless you rebuild them, they're only good for parts. I'm pretty sure the springs can be transferred onto standard shocks or KYBs.
Make me an offer, get in quick enough with a pineapple & I'll probably take it. Prefer not to have to freight them, as they'd be over Aus post weight limit. You'd have to organise a courier.
They are Tein NA series direct replacement shocks & springs. 16 point damper adjustable, height adjustable, with pillow mounts on the front. Quite rare on an FTO.
These are pretty ragged out - I would not recommend putting them in a car without a full rebuild by Fulcrum in QLD. I had the fronts rebuilt about 7 or 8 years ago & it cost me almost $700 because one of the shafts was bent. They've been in my car for almost 10 years & have seen countless track days.
So, unless you rebuild them, they're only good for parts. I'm pretty sure the springs can be transferred onto standard shocks or KYBs.
Make me an offer, get in quick enough with a pineapple & I'll probably take it. Prefer not to have to freight them, as they'd be over Aus post weight limit. You'd have to organise a courier.
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Tein NAs
No one? Going in the bin at the end of today!
- PHIL069
- Oldtimer
- Posts: 4719
- Joined: Sun Sep 20, 2009 5:00 pm
- Location: Central Coast > South Australia
Re: Tein NAs
If they are going in the bin, can I have the pillow mounts?
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done!
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now...
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: Tein NAs
Can't you sell the springs separate too?
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Tein NAs
I'll take em for spares for my set..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
- Chebus
- Grease Monkey
- Posts: 361
- Joined: Sun Jun 30, 2013 3:10 pm
- Location: sunshine coast
Re: Tein NAs
how much would it cost for the rebuild?
- c3rbera
- Mechanic
- Posts: 649
- Joined: Fri Mar 15, 2013 10:46 pm
- Location: Adelaide
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Tein NAs
I would estimate close to 1k.. Depending on what needs doing.Chebus wrote:how much would it cost for the rebuild?
But at minimum you would want to re-valve them all..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
- Vectose
- Forum Moderator
- Posts: 3947
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: Tein NAs
Pillow mounts are f**ked.PHIL069 wrote:If they are going in the bin, can I have the pillow mounts?
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: Tein NAs
They'll need a seal kit, plus I reckon there's at least one bent shaft amongst them. I reckon $1500 - $2k for all 4.
Yep, the pillow mount ball joints in the centre are fucked. Unsure if they are replaceable. Springs are fine.
I've dusted my hands with them kids, they're on my scrap metal pile round the side of my house, come get 'em if you want 'em!
Yep, the pillow mount ball joints in the centre are fucked. Unsure if they are replaceable. Springs are fine.
I've dusted my hands with them kids, they're on my scrap metal pile round the side of my house, come get 'em if you want 'em!
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Tein NAs
Bugger! Got plans tonight, and Gostford tomoz..
Might detour past on the way back from Gosford.. Will buzz ya tomoz and confirm..
Might detour past on the way back from Gosford.. Will buzz ya tomoz and confirm..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.