Page 1 of 1
Need help with bushes for a GPvR
Posted: Sun Dec 15, 2013 10:29 pm
by Shhtuart
I've been through the suspension thread and can't seem to figure out which bushes are applicable.
All I know is that the GPvR has a 20mm front and rear sway bar and a front lower arm rear bush that's the same as all facelift models.
I know still know nothing about this offset caster mumbo jumbo.
HAAALLLPPPP
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 12:08 am
by Bennoz
Oh god..
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 1:29 am
by destinationtoby
.
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 5:38 am
by Shhtuart
Have some xmas spirit I am a colossal tosser.
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 7:43 am
by Bennoz
Shhtuart wrote:Have some xmas spirit I am a colossal tosser.
Shhtuart wrote:xmas spirit I am a colossal tosser.
Shhtuart wrote:spirit I am a colossal tosser.
Shhtuart wrote:I am a colossal tosser.
Shhtuart wrote:I am a colossal tosser
Shhtuart wrote:I am a colossal tosser
Shhtuart wrote:I am a colossal tosser
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 8:09 am
by Technikhaus
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 10:25 am
by silverGPX
Hahahahahaha
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 10:42 am
by dstocks
Sorry, not sure myself
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 12:18 pm
by silverGPX
Well if u think about it, they would have the same bushes as a gr and gpx. Where the control arm bolts to is the same for all.
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 12:38 pm
by Vectose
All bushes are the same except for sway bars and front lower control arm rear bush.
There's a post in the suspension thread and a few other threads with part numbers.
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 1:20 pm
by shadowarrior
Bennoz wrote:Oh god..
Yes!!! I am not alone!!!
Re: Need help with bushes for a GPvR
Posted: Mon Dec 16, 2013 2:59 pm
by Shhtuart
H8rs
Re: Need help with bushes for a GPvR
Posted: Thu Jan 09, 2014 1:12 am
by payaya
Shhtuart wrote:I've been through the suspension thread and can't seem to figure out which bushes are applicable.
All I know is that the GPvR has a 20mm front and rear sway bar and a front lower arm rear bush that's the same as all facelift models.
I know still know nothing about this offset caster mumbo jumbo.
HAAALLLPPPP
Go to the camskill website and cross reference them. Lemme know if ya need the help!
Re: Need help with bushes for a GPvR
Posted: Thu Jan 09, 2014 11:08 am
by Shhtuart
Yeah, should have updated this thread with the outcome. I found all the part numbers.
I'll post them in this for future reference later.
Re: Need help with bushes for a GPvR
Posted: Thu Jan 09, 2014 12:28 pm
by Vectose
The poly sway bar bushes don't fit. They sit loose in the brackets.
Re: Need help with bushes for a GPvR
Posted: Thu Jan 09, 2014 12:43 pm
by silverGPX
Make new brackets
Re: Need help with bushes for a GPvR
Posted: Thu Jan 09, 2014 8:57 pm
by payaya
Shhtuart wrote:Yeah, should have updated this thread with the outcome. I found all the part numbers.
I'll post them in this for future reference later.
Fit them first then post haha.
