ALL OFFERS CONSIDERED
DISCOUNTS FOR MULTIPLE ITEMS
Will post smaller items provided the total is over $50 to make it worth my while
FOR SALE LIST
Custom 2lt oil catch can made specifically for the FTO $100.
Includes internal baffling to reduce splash and custom brackets to mount as shown.
This catch can will meet CAMS requirements for engines up to 2lts.
Leather steering wheel and boss kit, needs re-covering but boss kit good $10 Pickup Only
Manual GPX ECU Good working condition x2 $10 each. SOLD
Project Mu H16-03 Race Brake Pads $50.
These are $500 a set race only brake pads, not suitable for the street, but fantastic on the track. These pads have very good bite but also have very good wear life, I would get 3 to 4 full enduro race weekends out of a set. So this set still has at least a couple of track days left in them. Just swap them once you get to the track. And they are also gentle on the rotors, they don't tear up the rotors like some race pads. Yes you get 7 pads lol. Swap them around to get maximum life out of em! Backing plates see below.
Also have a set of titanium backing plates for the FTO front brake pads. $50.
These help keep heat from transferring from the brake pad through the caliper pistons to your brake fluid.
Not much to look at. I made these myself out of 0.8mm 6AL4V Titanium sheet as there weren’t any options available online for the FTO. I went a little thicker with 0.8mm rather than the standard 0.5mm normally used for this application to provide a little more heat ‘insulation’. Of course these are only part of the equation but certainly help. FTO GPX front brakes are quite good but it’s not hard to overheat them.
