FTO AUSTRALIA

Finally got my fto after 6 months searching LOL. By the way, does anyone know where is the best place to get FTO serviced around Sydney? And does anyone know how to fix central locking system or who can fix it and how much it will cost or if I wanna replace the whole thing, how much would it cost? Mine only works for driver door but not the passenger door?

Thanks

h4zey wrote:Finally got my fto after 6 months searching LOL. By the way, does anyone know where is the best place to get FTO serviced around Sydney? And does anyone know how to fix central locking system or who can fix it and how much it will cost or if I wanna replace the whole thing, how much would it cost? Mine only works for driver door but not the passenger door?

Thanks

Welcome, but try to initiate yourself with the search button.

All your Q's have been answered.

There is a thread in the NSW section about mechanics.

Central locking has been covered many tines. Just get a kit from Super Cheap. It is just a simple master and slave system. Either your master (driver side is not sending signal) or the slave side (passenger) is not recieving signal.

You can get them from a wreck, but who knows how long that will last. A kit will cost about $100.. Can even get from Jay Car..

WTTC, and yeh, what he said ^ if you can stop looking at his pic to read it

rock_it wrote:

h4zey wrote:Finally got my fto after 6 months searching LOL. By the way, does anyone know where is the best place to get FTO serviced around Sydney? And does anyone know how to fix central locking system or who can fix it and how much it will cost or if I wanna replace the whole thing, how much would it cost? Mine only works for driver door but not the passenger door?

Thanks

Welcome, but try to initiate yourself with the search button.

All your Q's have been answered.

There is a thread in the NSW section about mechanics.

Central locking has been covered many tines. Just get a kit from Super Cheap. It is just a simple master and slave system. Either your master (driver side is not sending signal) or the slave side (passenger) is not recieving signal.

You can get them from a wreck, but who knows how long that will last. A kit will cost about $100.. Can even get from Jay Car..

Thanks, yeah I went looking for it after I posted it (sorry).

All.good. I see you bought it! Are you happy with it?

dstocks wrote:All.good. I see you bought it! Are you happy with it?

I'm loving it so far!

Does anyone know if there is an alternative links for these 2 links?
http://ww2.mitsubishi-fto.org/?folio=43 ... al+locking
http://ftoaustralia.com/modules.php?nam ... pic&t=1058

First one is here: viewtopic.php?f=21&t=10241
Second one is here: viewtopic.php?f=27&t=1058

Vectose wrote:First one is here: viewtopic.php?f=21&t=10241
Second one is here: viewtopic.php?f=27&t=1058

Thanks, but I actually got those 2 links from the link above, however when I try opening it, one direct me to 2 pictures of FTO and nothing else and the other one direct me to "a problem with MySQL server". Is just me?

Those links are working for me. Im using Chrome on windows.

Chebus wrote:WTTC, and yeh, what he said ^ if you can stop looking at his pic to read it

Lol just read that fine print. yeah that avatar is quite a distraction..

http://www.completefto.com.au/assets/te ... ocking.pdf

This might help you out.

Vectose wrote:http://www.completefto.com.au/assets/te ... ocking.pdf

This might help you out.

Thanks, I'm not too sure if I can do it myself, as I'm really car illiterate, but I will look up some more information regarding that and see if I can find something on the DIY files lol

rock_it wrote:

h4zey wrote:Finally got my fto after 6 months searching LOL. By the way, does anyone know where is the best place to get FTO serviced around Sydney? And does anyone know how to fix central locking system or who can fix it and how much it will cost or if I wanna replace the whole thing, how much would it cost? Mine only works for driver door but not the passenger door?

Thanks

Just get a kit from Super Cheap. It is just a simple master and slave system. Either your master (driver side is not sending signal) or the slave side (passenger) is not recieving signal.

You can get them from a wreck, but who knows how long that will last. A kit will cost about $100.. Can even get from Jay Car..

Sorry, but I'm just wondering if it's possible to fix the master and slave system without replacing it, or do I still have to get a kit?
Thanks

The factory central locking is inside the door lock mechanism. The easiest and cheapest way to fix it is to install aftermarket actuators and hook them up to the factory wiring as it says in the guide.

It isn't difficult to do, but if you are still worried, get a mate that knows how to do it to help you out or get a shop to do it.

h4zey wrote:

rock_it wrote:

h4zey wrote:Finally got my fto after 6 months searching LOL. By the way, does anyone know where is the best place to get FTO serviced around Sydney? And does anyone know how to fix central locking system or who can fix it and how much it will cost or if I wanna replace the whole thing, how much would it cost? Mine only works for driver door but not the passenger door?

Thanks

Just get a kit from Super Cheap. It is just a simple master and slave system. Either your master (driver side is not sending signal) or the slave side (passenger) is not recieving signal.

You can get them from a wreck, but who knows how long that will last. A kit will cost about $100.. Can even get from Jay Car..

Sorry, but I'm just wondering if it's possible to fix the master and slave system without replacing it, or do I still have to get a kit?
Thanks

You do not fix the master and slave cylinders, just replace them brand new. Also, change both together. If one has gone or on it's way out, the other one will follow soon.

shadowarrior wrote:

h4zey wrote:

rock_it wrote:

h4zey wrote:Finally got my fto after 6 months searching LOL. By the way, does anyone know where is the best place to get FTO serviced around Sydney? And does anyone know how to fix central locking system or who can fix it and how much it will cost or if I wanna replace the whole thing, how much would it cost? Mine only works for driver door but not the passenger door?

Thanks

Just get a kit from Super Cheap. It is just a simple master and slave system. Either your master (driver side is not sending signal) or the slave side (passenger) is not recieving signal.

You can get them from a wreck, but who knows how long that will last. A kit will cost about $100.. Can even get from Jay Car..

Sorry, but I'm just wondering if it's possible to fix the master and slave system without replacing it, or do I still have to get a kit?
Thanks

You do not fix the master and slave cylinders, just replace them brand new. Also, change both together. If one has gone or on it's way out, the other one will follow soon.

you actually don't even have to take them out lol just shove 2 slaves on both side with the factory wire