FTO AUSTRALIA

Long story short, my dog chewed through my ONLY remote key and it's not working anymore, I cant move the car due the immobilizer.
Please tell me what option do I have left and if you have any recommendation on who can fix it or how to fix it, please give me the detail.
Thanks

You will need to get a mobile auto electrician to disconnect the immobilser, I can't think of any other options unless you can DIY.

so I figured out the way to disarm the immobilizer but for the love of heaven, I still can't reprogram the new remote control that I got from mister minit
I tried turning the acc-on 20 times and the off-on 20 times method but none works, anyone know how to reprogram a new remote?

I tried reprogramming a new remote too. I tried ACC-ON & OFF 8 times as advised in my system, but it does not go to 'code learn' mode.
An electrician told me that I need to contact the person who installed the alarm. Apparently a specific wire has to be connected to the alarm's brain to use the 'code learn' system. Auto electricians quoted over $100 just to touch the system here in Sydney. I love to see the solution.

Don't you usually need the old key to program a new key in?

My alarm system is after market. In my case, I don't need the old remote. In saying that, I still have to teach the old remote its new code as old remote loses its code after system goes in to 'code learning' mode. Same way you reprogram garage roller doors.

I don't know who install the system since it came with the car when I bought it, which electrician are you using? I might need to replace the whole system

prageeth wrote:I tried reprogramming a new remote too. I tried ACC-ON & OFF 8 times as advised in my system, but it does not go to 'code learn' mode.
An electrician told me that I need to contact the person who installed the alarm. Apparently a specific wire has to be connected to the alarm's brain to use the 'code learn' system. Auto electricians quoted over $100 just to touch the system here in Sydney. I love to see the solution.

Which auto electrician was that? Did they or you successfully activate the 'code learn' system? We couldn't get the car into a reprograming mode hence we couldnt reprogram the new remote..

Ooh man, I'm very sorry for very late response. No mate, I still haven't got it reprogrammed. Alarm was installed by Carbon Car Systems in Blacktown NSW. They are saying they cannot even reprogram a new remote instead they offered me to get a whole new system installed for a discounted price, $300 (installation+remove old wiring). By the way, did you get your issue fixed?

Nah, i will have to reinstalled the whole thing as well.. and i wrecked my engine oil some today.. the whole engine oil leaked out..

Hi

Did you get your engine fixed?