Page 1 of 1
Head bolt tightening procedure
Posted: Mon Jan 05, 2015 4:55 pm
by Vectose
So I was going through the engine and workshop manuals and each one has a different procedure for tightening the head bolts. Which one is correct?
- Engine Manual - Head Bolts.jpg (49.5 KiB) Viewed 174 times
- Workshop - Head Bolts.jpg (77.95 KiB) Viewed 174 times
Re: Head bolt tightening procedure
Posted: Mon Jan 05, 2015 9:09 pm
by bjk
The most recent one, presumably?
Re: Head bolt tightening procedure
Posted: Mon Jan 05, 2015 9:28 pm
by Vectose
Both manuals were published March 1998.
Re: Head bolt tightening procedure
Posted: Mon Jan 05, 2015 9:50 pm
by bjk
Vectose wrote:Both manuals were published March 1998.
But which day in March!
Re: Head bolt tightening procedure
Posted: Mon Jan 05, 2015 11:09 pm
by ZFL45H1
More to the point hours minutes and seconds lol
Re: Head bolt tightening procedure
Posted: Mon Jan 05, 2015 11:14 pm
by Daniel2019
Just zap the c**t with a rattle gun
Re: Head bolt tightening procedure
Posted: Tue Jan 06, 2015 8:40 pm
by Vectose
Daniel2019 wrote:Just zap the c**t with a rattle gun
I do it til they can spin freely right?
BTW, went with the one in the workshop manual.