Does anyone know how to get to the back side of the junction box under the dash? Do you have to remove the bracket in front of it or just undo the bolt at the bottom? I have power from the light switch on the front side but it's not going to the lights that are connected to the back side. There is not much room under there to have a good look.
Thanks
Col
Junction Box under dash
Moderators: IMC, Club Staff
-
Col_Ford
- Newbie
- Posts: 11
- jedwabna poszewka promocja
- Joined: Mon Aug 17, 2015 10:46 am
-
dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Re: Junction Box under dash
Ive only ever taken that out with dash out and other bits off, so I cant tell you im afraid. It might be easier to splice in a new wire rather than find where the old one has issues.
Complete FTO (http://www.completefto.com.au/completefto.asp) 
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
payaya
- Oldtimer
- Posts: 3670
- Joined: Sat Sep 06, 2003 5:00 pm
Re: Junction Box under dash
Why you need to get to the backside? If it's the fog lights itS the switch!