Page 1 of 1

wtb Mivec engine, wiring, ECU

Posted: Fri Sep 02, 2016 11:43 pm
by wagonist
I'm looking at doing a transplant cause my 1.5 4 cyl is wussy.

Looking for a Mivec V6, with wiring & ECU. plus instrument cluster
Manual box (with LSD would be nice :P ) also maybe, but not sure how well that would work with my current setup.

Cheers

Re: wtb Mivec engine, wiring, ECU

Posted: Sat Sep 03, 2016 2:15 pm
by evo-gsr
I have a non mivec engine with loom you can have for $100 ?

Re: wtb Mivec engine, wiring, ECU

Posted: Sat Sep 03, 2016 2:16 pm
by evo-gsr
I also have the ecu for it too..included in the above deal.

Re: wtb Mivec engine, wiring, ECU

Posted: Sat Sep 03, 2016 7:40 pm
by wagonist
Would prefer Mivec version, but will keep you in mind. Where abouts are you?
I forgot to ask about instrument cluster in the original post.
And how much of the wiring loom do you have?

Re: wtb Mivec engine, wiring, ECU

Posted: Sun Sep 04, 2016 10:41 am
by evo-gsr
Wollongong mate. From what I can see most of the loom is there possibly even the dash loom.

Re: wtb Mivec engine, wiring, ECU

Posted: Tue Sep 06, 2016 7:43 pm
by wagonist
I might be down that way on the weekend.
PM me some contact details? I can at least come & have a look...

Re: wtb Mivec engine, wiring, ECU

Posted: Tue Sep 06, 2016 8:00 pm
by dstocks
I have 2 of them, but im not at all sure how good they'd be. One supposedly has a blown head gasket but travelled 1.5 hrs before I pulled it apart and didnt lose much in the way of water. The other has has a hard life I suspect but was running when I got it to dismantle. Both are Mivec. You can have both for $250 if you are interested but would need to pick up. Im South Coast NSW (near Batemans Bay)

Re: wtb Mivec engine, wiring, ECU

Posted: Tue Sep 06, 2016 9:12 pm
by wagonist
Can you give me some extra details? PM or post reply, whatever suits.

How complete? Is it just the engines, or do you have more to make running?
pics?
Can be seen running?

Pick up is not really a prob.

Re: wtb Mivec engine, wiring, ECU

Posted: Wed Sep 07, 2016 6:42 pm
by evo-gsr
Pm sent to the OP