Page 1 of 1
Need some gearbox advice
Posted: Fri Jan 12, 2018 1:09 pm
by Mivec swapped gx
Does anybody know for sure if there are any stronger manual gearboxes that bolt upto the mivec engine as mines on its way out and im wanting a box that can handle more power,
Thanks in advance
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 3:55 pm
by Vectose
None
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 5:50 pm
by Mivec swapped gx
None at all? Anyone know roughly how much it would cost to uprate the fto box for around 300hp
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 5:53 pm
by Vectose
Stock box will handle that fine.
Only issues are input shaft bearings. Same as the EVO boxes.
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 6:06 pm
by Mivec swapped gx
Any chance you know the best input shafts/bearings to get for it then, just dont want to go get a new one then something goes wrong
Thanks for the quick response
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 7:23 pm
by Vectose
Stock
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 8:47 pm
by bjk
Just don't launch it 24/7 she'll be rite
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 9:23 pm
by Mivec swapped gx
Lol thanks man wasnt to sure
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 9:54 pm
by bjk
The real question is what you're gonna be doing to take it to 300hp anyway
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 10:23 pm
by Vectose
Exhaust and pod filter
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 10:35 pm
by Sahin
Taz is back \o/
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 10:49 pm
by bjk
Sahin wrote: ↑Fri Jan 12, 2018 10:35 pmTaz is back \o/
Vectose wrote: ↑Fri Jan 12, 2018 10:23 pm
Exhaust and pod filter
Make that
two pod filters
- twin pod lol.jpg (110.31 KiB) Viewed 3353 times
Re: Need some gearbox advice
Posted: Fri Jan 12, 2018 11:02 pm
by Sahin
I see a cool air intake. Its got a Nos fogger system and a T4 turbo. I see an AIC controller. It has direct-port nitrous injection and a stand alone fuel management system. Not a bad way to spend 10,000 dollars.
Re: Need some gearbox advice
Posted: Sat Jan 13, 2018 12:02 pm
by Bennoz
It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
Re: Need some gearbox advice
Posted: Sat Jan 13, 2018 12:29 pm
by bjk
Bennoz wrote: ↑Sat Jan 13, 2018 12:02 pm
It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
Unless he drives it like you
Re: Need some gearbox advice
Posted: Mon Jan 15, 2018 11:21 am
by Bennoz
bjk wrote: ↑Sat Jan 13, 2018 12:29 pm
Bennoz wrote: ↑Sat Jan 13, 2018 12:02 pm
It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
Unless he drives it like you
And look where I ended up. In a Commodore
Re: Need some gearbox advice
Posted: Mon Jan 15, 2018 2:18 pm
by bjk
Bennoz wrote: ↑Mon Jan 15, 2018 11:21 am
bjk wrote: ↑Sat Jan 13, 2018 12:29 pm
Bennoz wrote: ↑Sat Jan 13, 2018 12:02 pm
It's lasted 20 years on the factory bearing, just replace it. By the time it goes again you'll be in a camry.
Unless he drives it like you
And look where I ended up. In a Commodore
Shame.
Shaaaame!
Re: Need some gearbox advice
Posted: Mon Jan 15, 2018 3:25 pm
by Sahin
And I ended up in a camry (sort of)
Re: Need some gearbox advice
Posted: Tue Jan 16, 2018 1:57 pm
by silverGPX
Sahin wrote: ↑Fri Jan 12, 2018 10:35 pmTaz is back \o/
He’s selling parts on gumtree now.
http://www.gumtree.com.au/s-ad/wynnum-w ... ios_social
Re: Need some gearbox advice
Posted: Wed Jan 17, 2018 9:32 am
by evo-gsr
Please.. .give the back story on Taz?
Pm if need be.