Page 1 of 1
Front Swaybar Endlinks
Posted: Tue Feb 27, 2018 6:25 pm
by spetz
Hi everyone,
I've installed MCA red coilovers into my car.
The swaybar tab on the struts must be a bit lower than on the OEM struts as I had to use adjustable links and set them about 20-30mm shorter than the OEM droplinks.
Does anyone know what endlinks fit and are about 20-30mm shorter than stock?
I rather not run the spherical whiteline ones (or at least only run on one side to ensure there is no swaybar preload)
Re: Front Swaybar Endlinks
Posted: Tue Feb 27, 2018 7:49 pm
by bjk
Don't they have ordinary cut to size ones?
Re: Front Swaybar Endlinks
Posted: Wed Feb 28, 2018 12:25 am
by spetz
Link please?
Not sure which ones you're talking about.
There are adjustable ones but they are thicker than standard and at full lock they foul the strut a bit.
It's not felt through the steering wheel nor does it make a noise but it just bothers me
Re: Front Swaybar Endlinks
Posted: Wed Feb 28, 2018 1:15 am
by bjk
This is what I was thinking of, but I'm unsure if it's what you're after
http://www.whiteline.com.au/product_det ... 0&sq=16126
Re: Front Swaybar Endlinks
Posted: Wed Feb 28, 2018 1:08 pm
by Bennoz
From Bursons, Roadsafe part number STB4208, walk in price of 60 bucks each.
If at full adjustment in they're still too long, you can cut one end of the threaded rod down to what you need.
- lol2.JPG (209.97 KiB) Viewed 1787 times
Re: Front Swaybar Endlinks
Posted: Wed Feb 28, 2018 1:27 pm
by bjk
^Pres with the goods
Re: Front Swaybar Endlinks
Posted: Wed Feb 28, 2018 6:39 pm
by spetz
Thanks guys, I'll keep these in mind if I don't find any that are the right length for my needs
Re: Front Swaybar Endlinks
Posted: Thu Mar 01, 2018 11:01 am
by silverGPX
Lol those are correct though????
Re: Front Swaybar Endlinks
Posted: Thu Mar 01, 2018 9:34 pm
by Sahin
Not good enough for his highly calibrated lancer
f**k sake, just buy them and be done with it