Replacement rear bearing advice needed!

[GazGPvR]

Guys my rear bearing needs to get changed on my GP. My model is 1998.

All I can find on eBay is up to a 1997 model. Would this be the same part?

Thanks!

[bjk]

Iirc they are different

[GazGPvR]

They're not the same part bjk?

[Bennoz]

Definitely different. What's your VIN number? DE3A...... etc

[GazGPvR]

I was told that all the rear non ABS bearings are the same. sh*t, I just bought one last night.

Yes, DE3A... 6A12 etc. I don't know the full VIN number

[bjk]

VIN will be stamped on the firewall in your engine bay likely or on a plate

[GazGPvR]

Is it ok to put my vin number online?

[GazGPvR]

6U9000DE3A0300488

[Bennoz]

I haven't got a PC with ASA (parts catalog) available at the moment to confirm, so can you tell me if the car has ABS or not?

[GazGPvR]

It definitely doesn't have ABS Bennoz.

[Rob Furniss]

Well it is a GPVR 5 speed Auto made in March 1998, are you sure it doesn't have ABS, does it have a larger brake booster in the engine bay?

MR316500 is the part number for the rear hub if it's ABS.

https://www.viamoto.co.uk/proddetail.ph ... %2F1997+on

[GazGPvR]

Hi Rob. Yes I'm sure it doesn't have ABS. I've tested the brakes tonight. Plus I've checked the fuse box and it doesn't have a fuse slot available where the ABS should be. No ABS symbol light on dash either.

Is it only showing a part number for an ABS model?
Thanks for the help and info mate.

[GazGPvR]

I think it was the GPvR Aero that came with ABS as standard. Then the GPvR came with LSD as standard.

[Rob Furniss]

I thought all late 1997 onwards were ABS that's all and yes only showing the ABS part number, i'll check again in a bit though.

[GazGPvR]

Thanks Rob, appreciate the help. I took a photo of my fuse box and there are no fuses where the ABS fuses should be. Is it possible that the previous owner took them out somehow? How can I upload a pic?

[GazGPvR]

Pic of my fuse box

[Rob Furniss]

That could just be your missing the relay mate.
Bang on a pic of your brake booster and have a look down near the battery tray / firewall for the abs valve block thingy.

[Rob Furniss]

Here's a pic of the different brake boosters, ABS one is larger and has like a double hump

FTO Brake booster - standard and ABS.jpg (50.68 KiB) Viewed 1578 times

[GazGPvR]

Cheers for that Rob. So I got my rear hub bearing changed today. It turns out I don't have ABS. I bought two hubs as I didn't know what would fit. The non-ABS fitted... Sent the ABS one back today. I was just about to buy the relays and fuse. I'm a bit disappointed it doesn't have ABS!

[Vectose]

If you don't have ABS then it either isn't a version R or it's been removed.