Hey, i'm after a rear shelf. I need to *mod* my one because the previous owner was a bit of a lazy bum when he fitted the speakers (the tweeters prevent the rear shelf from sitting all the way down, this causes the rear shelf to vibrate) and i want a backup incase i snap the thing.
So yeah.
Rear shelf, in sydney, i'll pickup with cash. Name a price. Or if you point me to a store where i could buy one i'd be a happy camper.
NSW: Rear Shelf
Moderators: IMC, Club Staff
-
- Veteran Mechanic
- Posts: 1022
- jedwabna poszewka promocja
- Joined: Tue Mar 01, 2005 6:00 pm
- Location: Sydney, NSW
- Luca
- Grease Monkey
- Posts: 254
- Joined: Mon Aug 19, 2002 5:00 pm
- Location: Adelaide, SA, Goodwood
-
- Veteran Mechanic
- Posts: 1022
- Joined: Tue Mar 01, 2005 6:00 pm
- Location: Sydney, NSW
Yepo, some of my clips are smashed too, and the two tabs which bolt down (they face you when you take the seats out) are crushed into little bits as well.
Also those rear vent bits on mine are free to flap about because all the little tab bits between them have been snapped Whoever took this off the first time was _very_ heavy handed about it.
If you could get those part numbers, plus the one for the rear shelf, i'd be thankful. How do you go about ordering this stuff from mitsubishi??
I'll use my current shelf as a test dummy and cut out the plastic framework under the speaker grills and see if it keeps its integrity (thats what's pushing down on the tweeter part). Only reason i don't want to replace my current rear shelf is because it's been painted a nice deep maroon which really suits the colour theme. The vibration is extremely annoying, and after taking it off and securing it further (can't do it properly cause of the speakers though) it now also creaks when going around corners...
Also those rear vent bits on mine are free to flap about because all the little tab bits between them have been snapped Whoever took this off the first time was _very_ heavy handed about it.
If you could get those part numbers, plus the one for the rear shelf, i'd be thankful. How do you go about ordering this stuff from mitsubishi??
I'll use my current shelf as a test dummy and cut out the plastic framework under the speaker grills and see if it keeps its integrity (thats what's pushing down on the tweeter part). Only reason i don't want to replace my current rear shelf is because it's been painted a nice deep maroon which really suits the colour theme. The vibration is extremely annoying, and after taking it off and securing it further (can't do it properly cause of the speakers though) it now also creaks when going around corners...
-
- Veteran Mechanic
- Posts: 1022
- Joined: Tue Mar 01, 2005 6:00 pm
- Location: Sydney, NSW