Need something, Put it in here.
Private Sales Only
Moderators: IMC , Club Staff
MrFT000
Mechanic
Posts: 473 jedwabna poszewka promocja
Joined: Mon Aug 23, 2004 5:00 pm
Post
by MrFT000 » Sat May 28, 2005 7:40 pm
Ive had an absolute shocker, and snapped the brackets that hold the glovebox, and lost one of the pins.
If anyone can source these 2 little parts plus a pin to go through one of them as well - please let me know
this is what im after ( but obviously not broken like mine)
My pic was too big.
Jono
Mechanic
Posts: 747 Joined: Thu Aug 22, 2002 5:00 pm
Location: Brisbane
Contact:
Post
by Jono » Sat May 28, 2005 8:18 pm
prolly gonna have to fabricate a make shift part.. goto bunnings for ideas
Jono
devil2004
Grease Monkey
Posts: 174 Joined: Sat Mar 27, 2004 6:00 pm
Location: sydney
Post
by devil2004 » Mon May 30, 2005 2:03 am
Hey Grant!
I did the same thing to mine. I just super glued the part together and then put 2 layers of duct tape over the whole thing. Has worked fine ever since. It's probably going to be too hard to get one off a wrecker and it's gonna be pretty expensive to buy off mitsubishi.
MrFT000
Mechanic
Posts: 473 Joined: Mon Aug 23, 2004 5:00 pm
Post
by MrFT000 » Mon May 30, 2005 8:09 am
yeah i contemplated doing that (the super glue and tape), but ive lost all the broken pieces and now ive lost one of the pins!
i think ill be calling a few wreckers today...
My pic was too big.
kazbah
National Secretary
Posts: 2475 Joined: Sat Apr 26, 2003 5:00 pm
Location: Stiff Clutch...
Contact:
Post
by kazbah » Wed Jun 01, 2005 1:16 pm
Teh Ban Queen!