General Questions and comments
Moderators: IMC , Club Staff
FTO-NX
Apprentice
Posts: 45 jedwabna poszewka promocja
Joined: Fri Apr 25, 2003 5:00 pm
Location: NSW
Post
by FTO-NX » Sun May 04, 2003 4:49 pm
hi people juz want to know what headlight bulb will i use for FTO because i want to buy the clear blue ones and i wanted to know the Fog lights aswell???
ps.can i change the bulb in the bright bulb ones??
thanx in advance!!
indyfto
Grease Monkey
Posts: 197 Joined: Thu Oct 17, 2002 5:00 pm
Post
by indyfto » Mon May 05, 2003 4:06 am
The main headlight bulbs are 9005s and 9006s and the foglights use a H3 bulb. Note that to replace all these will need 6 bulbs in total (three pairs)
p_angelo_1
Newbie
Posts: 15 Joined: Mon Aug 05, 2002 5:00 pm
Location: NSW
Post
by p_angelo_1 » Tue May 06, 2003 1:38 am
hi there,
can anyone tell me what bulbs to use for the park lights in the fog lamp cluster? one of em's blown... im a bit lost when it comes to all the types of bulbs.
thanks in advance!
FTO338
Oldtimer
Posts: 6712 Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.
Post
by FTO338 » Tue May 06, 2003 2:53 am
Mate, as far as i know, there r only one type of park lights u can get for Jap cars. So u can go 2 anywhere & get one!!!
YYgirl
Grease Monkey
Posts: 184 Joined: Thu Mar 20, 2003 6:00 pm
Location: Brisbane
Post
by YYgirl » Tue May 06, 2003 5:25 pm
Hi, does anyone know if we can use 80watt bulbs for our headlights?
MaTHiE
Newbie
Posts: 5 Joined: Mon Nov 04, 2002 6:00 pm
Location: Brisbane
Contact:
Post
by MaTHiE » Tue May 06, 2003 5:56 pm
goto
www.versionr.com
for all bulb infor for fto
MaTHiE
Newbie
Posts: 5 Joined: Mon Nov 04, 2002 6:00 pm
Location: Brisbane
Contact:
Post
by MaTHiE » Tue May 06, 2003 5:58 pm
you can get the bulbs you want on ebay for about $35-40US
p_angelo_1
Newbie
Posts: 15 Joined: Mon Aug 05, 2002 5:00 pm
Location: NSW
Post
by p_angelo_1 » Wed May 07, 2003 1:28 pm
finally ended up getting park light replacement from repco... they were listed as wedge (type W5W) instead of park (the park lights were bigger)...
YYgirl
Grease Monkey
Posts: 184 Joined: Thu Mar 20, 2003 6:00 pm
Location: Brisbane
Post
by YYgirl » Thu May 08, 2003 6:02 pm
Hi, i am wondering if the 80 bulbs watts would be too high for our headlights? it wouldn't burn the lines? thanks!
indyfto
Grease Monkey
Posts: 197 Joined: Thu Oct 17, 2002 5:00 pm
Post
by indyfto » Fri May 09, 2003 4:33 am
I use 80/100W bulbs in both dipped and high beam lights and have had no problems whatsoever.
G1
Mechanic
Posts: 728 Joined: Sun Aug 04, 2002 5:00 pm
Location: VW Bora V6 4Motion
Contact:
Post
by G1 » Fri May 09, 2003 9:22 am
our parking lights are H3 right??
YYgirl
Grease Monkey
Posts: 184 Joined: Thu Mar 20, 2003 6:00 pm
Location: Brisbane
Post
by YYgirl » Fri May 09, 2003 1:32 pm
thanks indyfto!
indyfto
Grease Monkey
Posts: 197 Joined: Thu Oct 17, 2002 5:00 pm
Post
by indyfto » Fri May 09, 2003 4:09 pm
YYGirl: No probs
G1: The fog lights use a H3 bulb but the park lights are W5W...(small wedge type bulb)
YYgirl
Grease Monkey
Posts: 184 Joined: Thu Mar 20, 2003 6:00 pm
Location: Brisbane
Post
by YYgirl » Fri May 09, 2003 5:54 pm
sorry it's me again, I am wondering if 100watt fog lights would hurt our wires? Thanks heaps again!!!
G1
Mechanic
Posts: 728 Joined: Sun Aug 04, 2002 5:00 pm
Location: VW Bora V6 4Motion
Contact:
Post
by G1 » Fri May 09, 2003 6:16 pm
YYgirl wrote: sorry it's me again, I am wondering if 100watt fog lights would hurt our wires? Thanks heaps again!!!
can i ask where you are getting the 100w bulbs from?? or do you mean 80w bulbs with 100w output??
and thanks for clarifying that indyfto
YYgirl
Grease Monkey
Posts: 184 Joined: Thu Mar 20, 2003 6:00 pm
Location: Brisbane
Post
by YYgirl » Fri May 09, 2003 10:52 pm
I got it from Ebay. They are Koba bulbs, they are ok bulbs, I got 80 watts input for 9006, and 100 watt input for H3. It says output is 140watts, but i doubt it. I haven't put the H3 bulbs in yet, because i'm afraid it will burn the wires.
anyone can help??
G1
Mechanic
Posts: 728 Joined: Sun Aug 04, 2002 5:00 pm
Location: VW Bora V6 4Motion
Contact:
Post
by G1 » Sat May 10, 2003 2:07 am
YYgirl wrote: I got it from Ebay. They are Koba bulbs, they are ok bulbs, I got 80 watts input for 9006, and 100 watt input for H3. It says output is 140watts, but i doubt it. I haven't put the H3 bulbs in yet, because i'm afraid it will burn the wires.
anyone can help??
So it's not the Maruta ones? 5000K or what? are the 80w 9006 working ok??
Im thinking of getting it too
YYgirl
Grease Monkey
Posts: 184 Joined: Thu Mar 20, 2003 6:00 pm
Location: Brisbane
Post
by YYgirl » Sat May 10, 2003 9:24 am
Its not the Maruta ones, the brand is Koba. It's working alright, with 4800K. I thought it would be much brighter than 55watt bulbs, but I am not sure if that's the case. It is brighter of course, but not that much brighter, if you know what i'm saying. Because we have the case covering the headlight, I am wondering if we can take that off so it would be MUCH brighter? hehehe
G1
Mechanic
Posts: 728 Joined: Sun Aug 04, 2002 5:00 pm
Location: VW Bora V6 4Motion
Contact:
Post
by G1 » Mon May 26, 2003 5:36 pm
Hey YYgirl How did you replace your H3 bulbs? I cant get the white plastic plug opened.. which encases the connection for this bulb.
GPXXX
Oldtimer
Posts: 3433 Joined: Sat Apr 12, 2003 5:00 pm
Location: < the matrix >
Post
by GPXXX » Mon May 26, 2003 8:30 pm
beware of some of the cheap bulbs, because apparently some of them do not last very long...
i can't remember the exact brand to use, but usually the cheaper they are, the dodgier the quality...