Page 5 of 7
Posted: Mon Feb 06, 2006 9:52 pm
by Mitsiman
I see that this group buy as such seemed to stall out.
Anyway, I am in the process of getting another batch of FTO header kits made, due to now have sold out of stock again.
So what I am proposing is to start again, lets confirm numbers of those interested. I will again stick to the price of $550.00 for 10 or more sets plus freight which is on average $25.00 anywhere in australia.
So could those interested please repost there intentions, and we can look to get this happening again. And to answer, yes we will post nationally and internationally. Although pricing for freight will be less and the price would drop down to $500.00 AUD$ as there would be no GST value for international customers.
So who is interested at this stage?
Also remember we have the thermoblock kits available for teh FTo vehicles now as well for heat reduction of the upper intake manifold plenum. Very highlyrecomended one of hte few mods you can visibly measure the difference and effect.
Posted: Tue Feb 07, 2006 9:42 am
by mxysxy
I am in for GPX extractors
[/quote]Also remember we have the thermoblock kits available for teh FTo vehicles now as well for heat reduction of the upper intake manifold plenum. Very highlyrecomended one of hte few mods you can visibly measure the difference and effect.[/quote]
What is this exactly? and how much is the "visibly measurable difference"?
Posted: Tue Feb 07, 2006 6:12 pm
by smorison
put me down for a set
Posted: Fri Feb 10, 2006 6:23 pm
by Lenny
Yup, pencil me in at this stage...
Posted: Fri Feb 10, 2006 6:42 pm
by Mitsiman
Posted: Fri Feb 10, 2006 9:53 pm
by khunjeng
put me down for a set...plus all the other sh*t...I want it too.
Posted: Sat Feb 11, 2006 12:23 pm
by Bennoz
Get the list going kids, these puppies work wonders
1. mxysxy - GPX
2. Lenny - ?
3. smorrison - GPX
4. Khunjeng - GPX
5.
6.
7.
8.
9.
10.
Bags not do the coin collection on this one thou!
Posted: Sat Feb 11, 2006 4:02 pm
by bigpitty1
yeah I'm in!!!
1. mxysxy - GPX
2. Lenny - ?
3. smorrison - GPX
4. Khunjeng - GPX
5. Bigpitty1 - GPX
6.
7.
8.
9.
10.
Posted: Sat Feb 11, 2006 8:36 pm
by vivek
yay, finally
count me in as well folks:
1. mxysxy - GPX
2. Lenny - ?
3. smorrison - GPX
4. Khunjeng - GPX
5. Bigpitty1 - GPX
6. Vivek - GPX
7.
8.
9.
10.
Posted: Sun Feb 12, 2006 2:28 am
by dj_ules
might aswell.
1. mxysxy - GPX
2. Lenny - ?
3. smorrison - GPX
4. Khunjeng - GPX
5. Bigpitty1 - GPX
6. Vivek - GPX
7. dj_ules - GPX.
8.
9.
10.
Posted: Sun Feb 12, 2006 10:17 am
by khunjeng
7 in like 2 days...nice1...hey Mitsiman based on this qty would you get it going ASAP? I'm totally in need of some before my e-greedy gets fitted
Posted: Sun Feb 12, 2006 11:09 am
by FTO338
I'm getting a bit confuse now, is this list for the extractor? Because smorrison got a set of UAS downpipe already or steve, r u getting it for a test?
Posted: Sun Feb 12, 2006 6:09 pm
by bigpitty1
This group buy is for the RPW extractors right (please someone tell me), so we basically get the headers and the downpipe, because I'm gettin confused.
Posted: Sun Feb 12, 2006 6:12 pm
by Bennoz
Yup - u get the whole kit & kaboodle
Posted: Mon Feb 13, 2006 9:15 am
by Lenny
1. mxysxy - GPX
2. Lenny - GPX?
3. smorrison - GPX
4. Khunjeng - GPX
5. Bigpitty1 - GPX
6. Vivek - GPX
7. dj_ules - GPX.
8.
9.
10.
Posted: Mon Feb 13, 2006 1:27 pm
by dj_ules
hey this will fit onto your factory exhaust wont it ?
Posted: Mon Feb 13, 2006 1:49 pm
by smorison
i'm only buying extractors...
curious to see how they perform with the UAS engine pipes... hoping the two together give a bit better downlow performance not that i spend much time there but sick and tired of nothing down low
Posted: Mon Feb 13, 2006 1:55 pm
by Integral
Im in.
1. mxysxy - GPX
2. Lenny - GPX?
3. smorrison - GPX
4. Khunjeng - GPX
5. Bigpitty1 - GPX
6. Vivek - GPX
7. dj_ules - GPX.
8. Integral - GPX
9.
10.
Posted: Mon Feb 13, 2006 1:58 pm
by Bennoz
smorison wrote:i'm only buying extractors...
curious to see how they perform with the UAS engine pipes... hoping the two together give a bit better downlow performance not that i spend much time there but sick and tired of nothing down low
Might want to check on that Steve. Im pretty sure these headers wont mate up with a downpipe that meets upto the factory cast headers. I understand the loction where these RPW headers mate up the RPW downpipe is different to the stock arrangement....
Posted: Mon Feb 13, 2006 2:31 pm
by Mitsiman
No they will not fit up to anyone elses down pipe.
But the system comes with a RPW downpipe in the price up to stock position so its not really a problem.
Either way looks like we nearly have the numbers, will start getting them made and by then we should have hit out 10 people min which is great.
Also those who are ordering these - could you please go to your website at
www.rpw.com.au and fill out an online order form with all your details etc so I can start organising thigns this end.